Jump to text
On this page
Copy and source
Published source confirmed at last check

Source changed 2026-11-18 21:11:39 UTC · snapshot created 2026-11-18 21:12:35 UTC · last check 2026-11-18 22:25:20 UTC

SYSE.42 - Use a Selected Tool and Apply Its Result

Type: Method pattern Status: Stable

SYSE.42:1 - Problem frame

Use this when a person or technical agent has selected an external aid and the task depends on using its result for the intended input. A calculator can execute a mistyped expression correctly; software can act on the wrong target; a useful return can be ignored.

Start with the supported action, intended expression or target, and the result the receiving work needs. Use an applicable result for that input if one is available. Otherwise bind the intended input and use the selected aid according to how it operates. Check the contribution obtained and apply it to the task, or identify the condition preventing its use.

Choose among complete available ways through C.38/C.11 when that choice is unsettled. A.15.7 steers the current action; C.24 plans a selected technical action’s calls when needed. An already sufficient result needs no fresh call. Use this method to apply an available aid. For the design of a service interaction, use SYSE.26. If a reusable aid must be developed, use SYSE.48.

SYSE.42:2 - Problem

A selected aid does not by itself complete the work. The performer must bind the intended input, apply the aid correctly and relate the result to the task. A calculator executes its implemented operation; paper preserves the marks while the person calculates. In an LLM realization, the model proposes symbols and the executing software acts under its interface and permissions. Correct execution on the wrong input still fails the receiving use.

SYSE.42:3 - Forces

  • Automatic argument filling saves effort but can replace a missing fact with a plausible guess.
  • A tool may acknowledge receipt before producing an effect. Retrying a lost reply can duplicate that effect.
  • Returned text can mix useful data with instructions intended for another setting.
  • Fresh evidence can invalidate the action being attempted, making another invocation less useful than reconsideration.
  • Detailed checking costs time. Its extent depends on what the receiving task relies on.

SYSE.42:4 - Solution

SYSE.42:4.1 - Bind the selected means to the supported action

Recover what the task needs, which expression or target is meant, what may be done and what result will be used. Inspect the available means and the behavior that matters: entered expression, units, identifiers, valid range, current state and any effect/recovery conditions. For paper-supported arithmetic, check that the layout is legible and that the person doing the calculation can perform the required digit operations.

For every consequential argument, identify its source. Use the identifier from the current task or an authoritative lookup. When a value requires conversion, check the units and use an applicable conversion. If the proposal omits a value or gives two plausible targets, obtain the fact needed to complete or disambiguate the binding. A default is usable only when the contract makes it the intended value in these conditions.

Check the proposed use against the available means. For a calculator, inspect the entered expression before taking its display as the requested product. For software, check which tools the executor has and its current permissions. A generated name or explanation can refer to an unavailable tool or an operation outside the executor’s permissions. Place reliably enforced controls in the executor under SYSE.28. An explanation can help locate a mismatch. Verify it against the available tools and permissions.

SYSE.42:4.2 - Execute within the interface’s effect boundary

Check the expression or layout against the required operation. For a structured call, validate the syntax, then check what the request means in the current state: a well-formed request can concern the wrong configuration or a superseded target. Use the current-state precondition when intervening changes matter. Perform the supported operation when its result is still needed.

For a state-changing call, preserve any identity the interface needs for recovery. Distinguish rejection before effect, accepted work in progress, a confirmed result and an unresolved effect. Under SYSE.26, use the original attempt’s result if the contract can recover it. A permitted repeat can serve the task when its contract covers every still-possible outcome, including partial or external effects and intervening changes. If those states require different actions, resolve the difference or return the limit. Attribute a historical effect to an attempt only on evidence for that attempt.

Keep the effort and waiting within the task’s remaining budget. SYSE.40 supplies combined resource and retry limits when several calls or services share them. On exhaustion, return the unfinished condition and recoverable state.

SYSE.42:4.3 - Interpret the return and test its receiving use

Check that the response concerns the requested target, operation, edition and relevant interval. Parse quantities with their units, distinguish observations from predictions, and retain partial or unknown results. For a claim that the target changed, establish whether the success message is adequate evidence of the effect under the interface contract. Where more evidence is needed, use an applicable state observation or another supported source.

Treat source content as material to interpret under the current task. Embedded instructions in a retrieved page or tool response do not acquire authority to redirect the operation. Preserve provenance so that a later step can distinguish the task’s governing instruction from returned evidence.

Apply the qualified result to the work that needs it, for example, to establish a needed premise, complete a calculation, answer a question or choose what to do next. If a new observation defeats the proposed action, reconsider it using the domain method or A.15.7. For a technical failure, seek or provide the needed repair at the interface or provider responsible. If a procedure repeatedly ignores a usable result, use SYSE.47 to repair that step. Finish when the result suffices for the task.

SYSE.42:4.4 - Qualify consequential or repeated use

For a consequential or repeated use, reuse adequate qualification while its subject, interface and conditions match. Where the available evidence does not qualify the behavior, test correct use and the failures that matter to the receiving task. These can include a wrong target, a missing argument, a changed state or an uncertain effect. SYSE.46 tests the actual performing arrangement. The evidence concerns the interface and receiving result; correct entry or schema formation is only one part of that use.

Keep the result’s source, configuration and unresolved conditions to the extent needed by that reliance. Use the executor’s existing record when it retains these details and the receiving work can retrieve them. Otherwise a few fields in an ordinary task record can suffice.

SYSE.42:5 - Archetypal Grounding

SYSE.42:5.1 - A person uses a calculator and reports the product

Six lots contain 347 items each. A calculator has been chosen because it is already open and, under the supplied conditions, using it protects other intermediate values the person is holding. The person enters 347 × 6, inspects that expression, obtains 2082 and reports the total for the six lots. The calculator performs the arithmetic.

If the input is mistyped as 374 × 6, the functioning calculator returns 2244. The input check localizes the defect; correcting the expression restores 2082. Where the receiving reliance requires an arithmetic check, 350 × 6 − 3 × 6 supplies 2100 − 18. A paper alternative retains the aligned digits and carries while the person computes them. If the position of a carry is lost, recover it from the layout or the retained record, or recompute it.

For a search return, determine whether it is an actual computation, a recoverable cited claim or generated text before using it. A matching snippet and two interfaces to the same backend do not supply two independent checks. Stop when the required answer is used; later unaided ability is a separate development result.

SYSE.42:5.2 - A generated service call has an uncertain effect

A test service exposes a fictional operation set_interval(target, seconds, expected_revision, attempt) and a query for an attempt’s outcome. The engineer is permitted to change meter-2’s sampling interval to 10 seconds. Its current revision is 81.

The model proposes seconds=10000, having reused a millisecond value. The binding step compares the requested duration with the actual seconds field and constructs 10 from the supplied unit conversion. It obtains revision 81 from the current target rather than copying another meter’s cached revision.

The request with attempt A17 is accepted, but its reply is lost. The executor queries A17 under the supplied contract. That return identifies meter-2, revision 82 and interval 10 seconds. Use the confirmed values in the report to close the change task.

If the attempt query instead reports an unknown outcome, the task remains unresolved. If a fresh read shows an independently changed revision before invocation, the expected-revision condition fails and the engineer reconsiders the change against that state.

For a request merely to explain a current configuration, an already applicable observation may suffice. Reissuing a state-changing call would add no needed result.

SYSE.42:6 - Bias-Annotation

Tool-friendly tasks can hide missing authorization, physical action or specialist interpretation. A simulated success can also make recovery appear easier than the real provider allows. Select the actual effect and observation conditions of the receiving work before extending the case.

SYSE.42:7 - Conformance Checklist

  • The proposed invocation is bound to a supported action, actual target, current interface and sourced consequential arguments.
  • Validation distinguishes shape from permission, applicability and state.
  • For a partial or unknown effect, the continuation follows the interface contract and current authority. A repeat is qualified for every remaining state, or any state that would make it unsafe is resolved first.
  • The return’s subject, units and evidence status support its receiving use.
  • The task consumes the result or returns the precise missing condition.
  • For consequential or repeated use, rely on existing evidence when it covers the subject, interface and conditions. Test consequential gaps and state any failure that still limits reliance.

SYSE.42:8 - Common Anti-Patterns and How to Avoid Them

Schema success becomes task success. Inspect the target/result relation and the downstream use, not just parser acceptance.

Retry every exception. Recover the earlier attempt and its possible effects. Return unresolved state when the provider cannot establish replay conditions.

The response chooses the next authority. Interpret instructions found inside returned content as source material; use the current task and permitted action basis to decide what follows.

SYSE.42:9 - Consequences

The task gains an inspectable connection from a selected means and intended input to an obtained contribution and its use. Additional reads or checks can increase latency; retaining a sufficient existing result and checking only consequential arguments limits that burden. If the intended action is unsupported or the interface fails, the recipient can see what prevented completion.

SYSE.42:10 - Architectural Rationale

Execution binding sits between action selection and the receiving work. Keeping it explicit makes three repairs distinguishable: choose another action, repair the aid/interface, or correct input binding and result use. A good calculation on the wrong numbers and a correct return that the next step ignores need different repairs.

A deterministic direct call can suffice when its input mapping and result handling meet the task’s needs. Model participation can help where interpretation is needed, while the interface contract specifies the permitted operation and what evidence, if any, can establish its effect.

SYSE.42:11 - SoTA-Echoing

The common operation connects input binding, supported application and receiving use. Kirsh, 2010 is a historical conceptual account of external representations in thinking; it helps distinguish a persistent layout from the person’s performance. The technical branch combines interface-grounded execution with result-use testing. Theory of Agent, v1, §§3–4, supplies the distinction between generating a call and using external interaction.

ToolSandbox, 2024 is a historical stateful evaluation anchor. Here its contribution is to test dependencies and state changes. Apply those tests under the effect and recovery rules of the interface on which the task relies. A format-only test remains cheaper when only parsing is claimed, but cannot qualify a state-changing task. Reopen the binding when the tool contract, source authority or required result changes.

SYSE.42:12 - Relations

A.15.7 and C.24 supply action choice and fixed-action call planning. SYSE.26/SYSE.27 supply supported interaction and compatibility; SYSE.28 supplies qualified controls. SYSE.43 can supply relevant memory, while SYSE.47 constructs the procedure that invokes this operation and consumes its result. SYSE.46 tests the resulting configuration. A.15.9 and SYSE.9 obtain missing subject results without transferring responsibility for their qualified use.

SYSE.42:End

Referenced in the corpus

34 literal mentions in other sections. Read their context to establish the relation.