… supports.
Not this pattern when.
If the ethical value frame is missing, use D.1.
For multilevel ethics entry, use D.2.
To describe the sides and tension of an interlevel ethical conflict, use D.3.
For mediation or decision use of that conflict, use D.4.
If…
In D.5 - Bias Audit and Ethical Assurance
… 4 If the audit exposes interlevel conflict, use D.3 for the conflict description and D.4 for mediation or decision use. Keeps D.5 connected to the D cluster without replacing it…
In D.5 - Bias Audit and Ethical Assurance
D.5:8 - Consequences
A reader can distinguish a supported metric finding from a causal-fairness or ethical-assurance conclusion and identify what additional basis a proposed use would require…
In D.5 - Bias Audit and Ethical Assurance
… needed
“The release is ethically assured.” Separate audit findings, mitigations, accepted residuals, and the assurance or evidence relation. B.3, D.5
“The policy is acceptable because it helps the whole.” Check whether a multilevel conflict is live. D.2,…
In D.5 - Bias Audit and Ethical Assurance
… result.
Assurance as authorization Ethical assurance is treated as permission to proceed. Record assurance as assurance or evidence relation and keep D.4 and D.5 use separate.
Bias category replaces object REP, ALG, VIS, MET, or LNG code is treated as the…
In D.5 - Bias Audit and Ethical Assurance
… efficiency and applicant harm across declared scopes, D.3 describes that conflict and D.4 guides its decision use…
In D.5 - Bias Audit and Ethical Assurance
D.5:1.0 - Problem
The failure is to treat technical verification as sufficient for a fairness or ethical-assurance conclusion without identifying the audited object, affected people and intended use. Examine the evidence and any mitigation or residual on…
In D.5 - Bias Audit and Ethical Assurance
D.5:9 - Rationale
Technical accuracy alone does not establish fairness for affected groups. Connect the audit question with its object and intended use, then use the evidence appropriate to that claim. Measurement, causal support and ethical assurance answer…
In D.5 - Bias Audit and Ethical Assurance
A fairness claim may be associative, interventional, or counterfactual. C.28 supplies the causal-use question, rung, estimand, separate support components, common-threat result, and CausalUseSupportResultRef. D.5 keeps the bias/fairness audit and its…
In D.5 - Bias Audit and Ethical Assurance
D.5:11 - Relations
Builds on D.1 and coordinates with D.2, D.3, and D.4 for value frame, multilevel entry, conflict description, and mediation or decision use.
Coordinates with A.10 when the source-to-use relation behind relied-on evidence is implicit or…
In D.5 - Bias Audit and Ethical Assurance
D.5:1 - Problem Frame
Bias and fairness failures often survive ordinary verification. A metric may be accurate while hiding subgroup harm. A model may be predictive while reproducing past exclusion. A policy may look neutral while moving cost to people or…
In D.5 - Bias Audit and Ethical Assurance
… causal basis only for a conclusion that needs it. Section :3.1 reuses an adequate audit account and selects further work from the reliance, while a missing required basis leaves the stronger conclusion unsupported. B.3 supplies any assurance relation and D.4…
In D.5 - Bias Audit and Ethical Assurance
D.5:1.1 - Forces
Force Tension Ordinary verification vs. subgroup harm Ordinary verification can leave bias or harm to particular groups unexamined.
Bounded answer vs. stronger reliance A concern may need only a qualified answer; a release or assurance claim…
In D.5 - Bias Audit and Ethical Assurance
… a value conflict returns to D.3 or D.4. An intended audit, fairness, or assurance conclusion must satisfy its evidence conditions. A missing basis leaves that conclusion unsupported. Select further investigation and the record it needs for that claim or…
In D.5 - Bias Audit and Ethical Assurance
… and source rules; use A.10 when the source-to-use relation is implicit or must be made replayable. Use D.3 to describe an interlevel ethical conflict and D.4 to mediate or use it in a decision. Use C.30.ILC when the issue is an architecture residual rather…