Brief summary of the bug

No water flows in brew mode when the steam switch is engaged

Describe the issue in greater detail

When the physical steam switch is engaged but brew mode is selected, engaging the brew switch starts the process - but no water comes out. The pump works, pressure is build up - but the group head stays dry.

This happened by accident, when I forgot to disengage the steam switch after foaming milk.
I selected the brew mode, got my puck ready, and flipped the breaker switch while the steam switch was engaged accidentally from before.

This is merely a user mistake - but maybe switching to water mode when both switches are engaged (as suggested in #285 ) might be a good solution.

Are you able to reproduce the issue?

Yes

Steps to reproduce

1. have the steam switch engaged, but be in the main menu. Probably by switching the machine off with the switch engaged and on again (but this might not be needed).
2. go to the brew mode
3. start brewing with the brew switch
4. notice that no water flows out of the grouphead.

Expected behavior

The machine should not pretend to make a shot, but rather make the user aware of his mistake.

However, I don't think displaying an error message or similar would be good.
Instead

• either switch to water mode, as suggested by [Feature Request] [GCP] switch to water mode when physical brew & steam switches are pressed #285
  or
• don't do anything, even not engaging the pump. Thus the user will check the machine and wonder.

Has this function/fetaure worked before with your GaggiMate?

No

Relevant logs or error messages

Firmware version

1.6.0 stable

What machine are you experiencing this issue on?

GC E24
Gaggimate pro

Additional context

I enabled control via the physical switches

Find me on discord "patmuk" if you have further questions!