Skip to content

Latest commit

 

History

History

MAC Changer

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
README.md
README.md
 
 
macChanger.py
macChanger.py
 
 

README.md

MAC Address Changer

This script changes the MAC address of a network interface. It takes two command line arguments:

  • -i, --interface: the name of the interface for which the MAC address needs to be changed (e.g. eth0, wlan0, etc.)
  • -m, --mac: the new MAC address that needs to be set (in the format XX:XX:XX:XX:XX:XX)

Requirements

This script requires Python 3 and the optparse module.

Usage

To run the script, open a terminal and navigate to the directory where the script is saved. Then run the following command:

python mac_changer.py -i [interface_name] -m [new_mac_address]

Make sure to replace [interface_name] with the name of the interface for which you want to change the MAC address, and [new_mac_address] with the new MAC address that you want to set.

Example:

python mac_changer.py -i eth0 -m 00:11:22:33:44:55

This will change the MAC address of the eth0 interface to 00:11:22:33:44:55.

Disclaimer

This script is intended for educational purposes only. Use at your own risk. The author is not responsible for any damage caused by this script.