// Copyright 2018 ETH Zurich and University of Bologna.

// Copyright and related rights are licensed under the Solderpad Hardware

// License, Version 0.51 (the "License"); you may not use this file except in

// compliance with the License. You may obtain a copy of the License at

// http://solderpad.org/licenses/SHL-0.51. Unless required by applicable law

// or agreed to in writing, software, hardware and materials distributed under

// this License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR

// CONDITIONS OF ANY KIND, either express or implied. See the License for the

// specific language governing permissions and limitations under the License.

// Antonio Pullini <pullinia@iis.ee.ethz.ch>

module edge_propagator_rx (

input logic clk_i,

input logic rstn_i,

input logic valid_i,

output logic ack_o,

output logic valid_o

);

pulp_sync_wedge i_sync_clkb (

.clk_i ( clk_i ),

.rstn_i ( rstn_i ),

.en_i ( 1'b1 ),

.serial_i ( valid_i ),

.r_edge_o ( valid_o ),

.f_edge_o ( ),

.serial_o ( ack_o )

);

endmodule