modbus write in pure go, support rtu,ascii,tcp master library,also support tcp slave.
- modbus Serial(RTU,ASCII) Client
- modbus TCP Client
- modbus TCP Server
- object pool design,reduce memory allocation
- fast encode and decode
- interface design
- simple API and support raw data api
Use go get.
go get github.com/thinkgos/gomodbus/v2Then import the modbus package into your own code.
import modbus "github.com/thinkgos/gomodbus/v2"Bit access:
- Read Discrete Inputs
- Read Coils
- Write Single Coil
- Write Multiple Coils
16-bit access:
- Read Input Registers
- Read Holding Registers
- Write Single Register
- Write Multiple Registers
- Read/Write Multiple Registers
- Mask Write Register
- Read FIFO Queue
modbus RTU/ASCII client see example
package main
import (
"fmt"
"time"
"github.com/goburrow/serial"
modbus "github.com/thinkgos/gomodbus/v2"
)
func main() {
p := modbus.NewRTUClientProvider(modbus.WithEnableLogger(),
modbus.WithSerialConfig(serial.Config{
Address: "/dev/ttyUSB0",
BaudRate: 115200,
DataBits: 8,
StopBits: 1,
Parity: "N",
Timeout: modbus.SerialDefaultTimeout,
}))
client := modbus.NewClient(p)
err := client.Connect()
if err != nil {
fmt.Println("connect failed, ", err)
return
}
defer client.Close()
fmt.Println("starting")
for {
_, err := client.ReadCoils(3, 0, 10)
if err != nil {
fmt.Println(err.Error())
}
// fmt.Printf("ReadDiscreteInputs %#v\r\n", results)
time.Sleep(time.Second * 2)
}
}modbus TCP client see example
package main
import (
"fmt"
"time"
modbus "github.com/thinkgos/gomodbus/v2"
)
func main() {
p := modbus.NewTCPClientProvider("192.168.199.188:502", modbus.WithEnableLogger())
client := modbus.NewClient(p)
err := client.Connect()
if err != nil {
fmt.Println("connect failed, ", err)
return
}
defer client.Close()
fmt.Println("starting")
for {
_, err := client.ReadCoils(1, 0, 10)
if err != nil {
fmt.Println(err.Error())
}
// fmt.Printf("ReadDiscreteInputs %#v\r\n", results)
time.Sleep(time.Second * 2)
}
}modbus TCP server see example
package main
import (
modbus "github.com/thinkgos/gomodbus/v2"
)
func main() {
srv := modbus.NewTCPServer()
srv.LogMode(true)
srv.AddNodes(
modbus.NewNodeRegister(
1,
0, 10, 0, 10,
0, 10, 0, 10),
modbus.NewNodeRegister(
2,
0, 10, 0, 10,
0, 10, 0, 10),
modbus.NewNodeRegister(
3,
0, 10, 0, 10,
0, 10, 0, 10))
err := srv.ListenAndServe(":502")
if err != nil {
panic(err)
}
}gomodbus had been being developed with GoLand under the free JetBrains Open Source license(s) granted by JetBrains s.r.o., hence I would like to express my thanks here.
if package help you a lot,you can support us by:
Alipay
WeChat Pay