Volume XXIX, 2020/1
All
- Research on the behaviour of a LiFePo4 pouch cell under mechanical stress (Abstract)
- Szabo I, Kocsis L, Mariasiu F
- levente.kocsis@auto.utcluj.ro
- DOI: 10.15660/AUOFMTE.2020-1.3512
- Comparison of passenger vehicle braking distance when travelling on snow and asphalt at different velocities (Abstract)
- A I Radu, B A Tolea
- alexandru.radu@unitbv.ro
- DOI: 10.15660/AUOFMTE.2020-1.3513
- Research of NOx and PM10 pollutants in Cluj-Napoca with the mobile system for mitigating public health risks (Abstract)
- D L Băldean, L Andrei, A I Borzan
- doru.baldean@auto.utcluj.ro
- DOI: 10.15660/AUOFMTE.2020-1.3514
- Friction induced heating properties of the polyamide/steel type contacts (Abstract)
- M T Lates
- atesmt@unitbv.ro
- DOI: 10.15660/AUOFMTE.2020-1.3515
- Waste reduction by implementation of CNC machining center and Lean Manufacturing (Abstract)
- I C Gherghea, D C Negrau, C Bungau, M Faur
- cosmin.gherghea@csud.oradea.ro
- DOI: 10.15660/AUOFMTE.2020-1.3516
- A brief overview of parallel robots and parallel kinematic machines (Abstract)
- M Ratiu, D M Anton
- mratiu@uoradea.ro
- DOI: 10.15660/AUOFMTE.2020-1.3517
- Study of Vulnerabilities in Designing and Using Automated Vehicles based on SWOT method for Chevrolet Camaro (Abstract)
- P Bec, A I Borzan, M Frunză, D L Băldean, I Berindei
- doru.baldean@auto.utcluj.ro
- DOI: 10.15660/AUOFMTE.2020-1.3518
- The use of finite element analysis in studying deformations of parts clamped in machine tool devices (Abstract)
- I Stănășel, P D Tocuț, R Veres
- stanasel@uoradea.ro
- DOI: 10.15660/AUOFMTE.2020-1.3519
- Cam – clamping device with variable eccentricity (Abstract)
- P D Tocuț, I Stănășel, C Feric
- tocutpd@yahoo.com
- DOI: 10.15660/AUOFMTE.2020-1.3520
- Clutch model and controller development in MATLAB Simulink (Abstract)
- D Moldovanu, A Csato
- dan.moldovanu@auto.utcluj.ro
- DOI: 10.15660/AUOFMTE.2020-1.3521
- Studies on the improvement of the supply chain in the automotive industry: production of electrical wiring (Abstract)
- M Ință, C Purcar, M Bădescu
- marinela.inta@ulbsibiu.ro
- DOI: 10.15660/AUOFMTE.2020-1.3522
- Modeling with hierarchical colored Petri nets. Case study (Abstract)
- F S Blaga, A Pop, T Vesselenyi, V Hule, C I Indre
- fblaga@uoradea.ro
- DOI: 10.15660/AUOFMTE.2020-1.3523
- Coordinate Measuring Machine thread position measurement analysis (Abstract)
- P E Serban, F Peti
- serban.petru@yahoo.com
- DOI: 10.15660/AUOFMTE.2020-1.3524
- Research on the behaviour of a LiFePo4 pouch cell under mechanical stress (Abstract)
- Szabo I, Kocsis L, Mariasiu F
- levente.kocsis@auto.utcluj.ro
- DOI: 10.15660/AUOFMTE.2020-1.3525
- Aspects of creativity management in the Romanian industry and doctoral research (Abstract)
- G M Moraru, L G Popescu
- gina.moraru@ulbsibiu.ro
- DOI: 10.15660/AUOFMTE.2020-1.3526
- The influence of ethanol and biodiesel blends on diesel engine performance and emissions (Abstract)
- B C Benea
- b.benea@unitbv.ro
- DOI: 10.15660/AUOFMTE.2020-1.3527
- Wear of three-treads uncoated and coated integral hob milling tools (Abstract)
- S Sovilj-Nikić, B Sovilj, G Varga, N Ungureanu
- sandrasn@eunet.rs
- DOI: 10.15660/AUOFMTE.2020-1.3528
- Overcoming the barriers of consignment stock policy implementation in a manufacturing company (Abstract)
- M Faur, A Sipos, C Bungau, C I Gherghea
- monica.faur@csud.uoradea.ro
- DOI: 10.15660/AUOFMTE.2020-1.3529
- Data acquisition for medical devices (Abstract)
- R Veres, B C Feier, S Ilea, G Bohm-Revesz
- ralph.veres@catedral.ro
- DOI: 10.15660/AUOFMTE.2020-1.3530
- Validation of an algorithm for predicting the remaining useful life, for a model with linear degradation (Abstract)
- G Grebenişan, N Salem, S Bogdan, D C Negrău
- grebe@uoradea.ro
- DOI: 10.15660/AUOFMTE.2020-1.3531
- A brief overview of Additive Manufacturing (Abstract)
- D C Negrau, G Grebenișan, C Gherghea
- dan.negrau@yahoo.com
- DOI: 10.15660/AUOFMTE.2020-1.3532
- Theoretical and experimental research on the development of an analysis system of the hand tremor movement for patients with Parkinson’s disease (Abstract)
- St Borta, M Baritz
- stefania.borta@yahoo.com
- DOI: 10.15660/AUOFMTE.2020-1.3533
- Theoretical and experimental research on the use of the blinking reflex for command and control of human body movement (Abstract)
- D Drăgușin, M Baritz
- deliadragusin@yahoo.fr
- DOI: 10.15660/AUOFMTE.2020-1.3534
- New research direction on performance and co-creation: a literature review (Abstract)
- M B Tudose, G Agafitei, S Avasilcai
- brindusa.tudose@gmail.com
- DOI: 10.15660/AUOFMTE.2020-1.3535
- Material handling based on object recognition with the help of FANUC delta-parallel industrial robot (Abstract)
- Gy Korsoveczki, G Husi
- korsoveczki.gyula@gmail.com
- DOI: 10.15660/AUOFMTE.2020-1.3536
- Artificial Intelligence Applications in Autonomous Vehicles: Training Algorithm for Traffic Signs Recognition (Abstract)
- C Dursun, T I Erdei, G Husi
- candrsun@gmail.com
- DOI: 10.15660/AUOFMTE.2020-1.3537
- Researches regarding the inner turning of the Polytetrafluoroethylene at small and medium feeds (Abstract)
- I Pascu, I Popescu, A Didu
- i_pascu@yahoo.com
- DOI: 10.15660/AUOFMTE.2020-1.3538
- Static analysis of a vehicle suspension with leaf springs and reaction bars (Abstract)
- C Alexandru
- calex@unitbv.ro
- DOI: 10.15660/AUOFMTE.2020-1.3539
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License