When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
DIY.bcimcheap on Instagram: "How to DIY LVP stair treads. LVP is by @procorefloors in the color ‘warm honey oak’ and purchased from @loweshomeimprovement - p.s… | Diy stairs, Stairs makeover, Flooring for stairs
5
instagram.com
Finishing Stair Treads
DIY.bcimcheap on Instagram: "How to DIY LVP stair treads. 1. Use a 1/4” square notch router bit to route 2 channels on the underside of the plank (the distance between both route lines is determined by how thick your tread is & how far you want it to wrap under the tread) 2. Set router depth leaving at least 1/16” of an inch on the plank 3. After routing, peel off the underlayment as applicable using a heat gun (the stair noses have to be glued down) 4. Clamp the plank down to a secure surf