NetUI

Overview

NetUI is a Rust-based interactive terminal user interface designed to monitor network interfaces. It allows you to send ARP messages through specified interfaces and listen for packets to calculate bandwidth.

Installation

To install and run NetUI, ensure that you have Rust and Cargo installed on your system. Follow these steps:

• Install from crates.io:

  cargo install netui
  

• or Clone the repository and build from source:

  git clone https://github.com/yousfiSaad/netui.git
  cd netui
  
  cargo build --release
  

Backend Options

NetUI supports two network monitoring backends:

Building with eBPF Backend (Linux)

# Install bpf-linker (one-time setup)
cargo install bpf-linker

# Build with eBPF backend
cargo build --release --features ebpf-backend

Building on macOS (via Colima)

Since eBPF is Linux-only, you can use Colima for cross-compilation on macOS:

# Start Colima
colima start

# Setup (one-time)
colima ssh -- bash -c "rustup toolchain install nightly && rustup component add rust-src --toolchain nightly && cargo install bpf-linker"

# Build with eBPF backend
colima ssh -- bash -c "cargo build --release --features ebpf-backend"

See docs/07-EBPF-FEATURES.md for more details on eBPF capabilities.

Use the App

sudo ./target/release/netui --name eth0
# or
sudo netui --name eth0
# or
sudo `which netui` --name eth0

This will start the program and watch for packets on the eth0 interface.

Scope

enetui monitors Local Area Network (LAN) traffic only. The term "remote" in this project refers to other devices on the same LAN, not internet/WAN hosts.

What enetui monitors:

• Devices on your local network segment (192.168.x.x, 10.x.x.x, etc.)
• ARP traffic for host discovery
• IPv4 packets for bandwidth statistics
• TCP connections and application traffic

What enetui does NOT monitor:

• Internet/WAN traffic (routed through gateway)
• Traffic on other network segments/VLANs
• Encrypted VPN tunnels

Security Considerations

enetui includes several security features to protect against network threats:

ARP Spoofing Detection

• MAC Change Alerts: Detects when an IP address associates with a new MAC address, which may indicate ARP spoofing or DHCP conflicts
• Visual indicator: [⚠ MAC CHANGED] shown in red for affected hosts
• Alerts logged with old/new MAC addresses for forensic analysis

ARP Reply Validation

• Unolicited Reply Rejection: Only accepts ARP replies that correspond to requests we sent
• Timeout Protection: ARP requests expire after 15 seconds (accommodates full /24 network scans)
• Warning Logs: Rejected replies are logged as potential ARP poisoning attempts

Device Tracking

• MAC-based Identity: Devices are tracked by MAC address across DHCP IP changes
• Prevents duplicate entries when devices renew their DHCP leases
• Maintains consistent bandwidth statistics and hostname resolution

Recommendations

• Run enetui with sudo for raw socket access (required for packet capture)
• Review MAC change alerts for potential ARP spoofing
• Monitor unsolicited ARP reply warnings
• Use in trusted network environments only

Send ARP Messages

To send ARP messages and discover hosts on a specific interface, press s key:

Listen to Packets

The program also listens to packets on the specified interface and calculates the bandwidth of the sent and received packets per host.

Features

• Interactive Terminal UI: Provides an interactive way to manage network interfaces.
• ARP Message Sending: Send ARP messages to discover hosts in the network.
• Packet Listening: Listen to packets on the specified interface.
• Bandwidth Calculation: Calculate the bandwidth of sent and received packets.
• TCP State Tracking: Track connection states (SYN, ESTABLISHED, FIN, etc.)
• Connection Quality Metrics: Monitor retransmits and RTT (eBPF backend)
• App Classification: Categorize traffic by application/protocol

Performance

NetUI has been optimized for high-throughput network monitoring:

See PERFORMANCE_ANALYSIS.md for detailed benchmarking results and optimization details.

Running Benchmarks

# Run the full benchmark suite
cargo bench

# Run specific benchmark group
cargo bench --bench packet_processing

Contributing and Code of Conduct

We welcome contributions from the community! To contribute, follow these steps:

1. Fork the repository.
2. Create a new branch for your feature or bug fix: git checkout -b feature/your-feature
3. Commit your changes: git commit -am 'Add some feature'
4. Push to the branch: git push origin feature/your-feature
5. Open a pull request detailing your changes.

Please ensure that your contributions follow our code of conduct, which encourages respect and collaboration within our community.