◈ PSNET

A beautiful real-time network monitor for your terminal.
See every connection. Know every domain. Watch the wire.

Features • Install • Usage • Keys • Screenshots • Architecture • Contributing

What is PSNET?

PSNET is a zero-dependency (no Npcap/WinPcap needed) TUI network monitor built in Rust for Windows PowerShell. It gives you real-time visibility into everything happening on your network — live speed graphs, active connections with DNS-resolved hostnames, a Wireshark-like traffic event log, and a raw packet wire preview — all in a beautiful terminal interface.

Think Wireshark meets htop, but for your terminal.

┌─ ◈ PSNET Network Monitor ⚡ │ Ethernet │ 42 active / 127 total │ ⏱ 0:15:32 ─┐
│                                                                                 │
├─ ▼ Download 2.45 MB/s ──────────────────┬─ Dashboard ──────────────────────────┤
│  ▁▂▃▅▇█▇▆▄▃▂▁▁▂▃▆█▇▅▃▂▁▁▂▅▇█▇▅▃▂     │  ▼  2.45 MB/s                       │
│                                         │  ████████████░░░░░░░░ 62%            │
├─ ▲ Upload 156.2 KB/s ──────────────────┤  peak 4.12 MB/s  total 1.24 GB       │
│  ▁▁▁▂▃▂▁▁▁▂▃▂▁▁▁▂▃▃▂▁▁▁▂▃▂▁▁▁▂▃     │                                       │
│                                         │  ▲  156.2 KB/s                       │
│                                         │  ████░░░░░░░░░░░░░░░░ 18%            │
│                                         │  peak 892.1 KB/s  total 48.2 MB      │
├─ [1] Traffic  [2] Connections ──────────┴──────────────────────────────────────┤
│  Time      Process          Host / Domain                Service    Event       │
│  17:04:52  chrome.exe       → github.com:443             HTTPS/TCP  ● OPEN      │
│  17:04:52  Discord.exe      → discord.gg:443             HTTPS/TCP  ● OPEN      │
│  17:04:53  Code.exe         → api.github.com:443         HTTPS/TCP  ↔ STATE     │
│  17:04:54  spotify.exe      → audio-ak.spotify.com:443   HTTPS/TCP  ● OPEN      │
│  17:04:55  chrome.exe       → fonts.googleapis.com:443   HTTPS/TCP  ✕ CLOSE     │
├─ ⚡ Wire  Live Packet Preview ────────────────────────────────────────────────┤
│  17:04:52 ◀ IN   2K  HTTP/1.1 200 OK\nContent-Type: text/html; charset=utf-8  │
│  17:04:53 ▶ OUT  1K  GET /api/v1/repos HTTP/1.1\nHost: api.github.com\nAccept  │
│  17:04:53 ◀ IN  12K  {"id":12345,"name":"psnet","full_name":"user/psnet","...  │
│  17:04:54 ▶ OUT 256  POST /track HTTP/1.1\nContent-Length: 128\nContent-Type:   │
├─────────────────────────────────────────────────────────────────────────────────┤
│ q Quit  Tab Switch  ↑↓ Scroll  │  p Pause  c Clear  x Show Local  f Filter     │
└─────────────────────────────────────────────────────────────────────────────────┘

Screenshots

Features

📊 Live Speed Monitoring

• Sparkline graphs — smooth Unicode waveforms that flow like a live EKG
• Download (blue) and Upload (purple) tracked separately
• Gauge bars showing current speed as percentage of peak
• Dynamic colors — sparklines brighten as speed increases
• Peak speed, current speed, and total transferred data at a glance

🔗 Smart Connection Table

• DNS-resolved hostnames — see github.com instead of 140.82.121.4
• Service labels — HTTPS/TCP, DNS/UDP, SSH/TCP instead of raw port numbers
• Color-coded by service — HTTPS=green, HTTP=yellow, DNS=blue, SSH=purple
• State-aware sorting — ESTABLISHED connections first, LISTEN/TIME_WAIT dimmed
• Localhost filter — hide the noise of 127.0.0.1 loopback traffic (toggle with x)
• Live filtering — type to search by process name, hostname, port, or service
• Process names — see which app owns each connection

🌊 Traffic Event Log (Wireshark-style)

• Real-time connection lifecycle — see connections OPEN, CLOSE, and STATE changes as they happen
• Browser Network-tab layout — Host/Domain as the primary column
• 5,000 event buffer — oldest events automatically roll off (buffer usage shown in title bar)
• Color-coded events — green for OPEN, red for CLOSE, yellow for STATE changes
• Pause, filter, scroll through history

⚡ Wire Preview (Packet Sniffer)

• Real packet payload inspection — see actual HTTP headers, JSON responses, protocol handshakes flowing through your network in real time
• Smart ASCII extraction — binary/encrypted data filtered out, readable text highlighted
• Content-aware coloring — HTTP requests (green), JSON (cyan), HTML (yellow), protocol headers (purple)
• Direction indicators — ◀ IN / ▶ OUT with byte sizes
• No external dependencies — uses Windows raw sockets (requires Administrator for this feature)

🎨 Beautiful Dark Theme

• Consistent deep navy palette across all panes
• Unicode box-drawing characters for clean borders
• Activity indicator in title bar (⚡ lightning for high throughput)
• Refined status bar with golden keybind highlights

🔍 DNS Resolution

• Reads the Windows DNS cache automatically — no extra network traffic
• Dual approach: fast API call every tick + ipconfig /displaydns parsing for completeness
• 35+ well-known port labels (HTTPS, HTTP, DNS, SSH, RDP, MySQL, PostgreSQL, Redis, etc.)

Installation

From Source (Recommended)

# Clone the repository
git clone https://github.com/yourusername/psnet.git
cd psnet

# Build optimized release binary
cargo build --release

# Run it
.\target\release\psnet.exe

Via Cargo Install

cargo install --path .

# Then run from anywhere
psnet

Requirements

• Windows 10/11 (uses Win32 APIs for connection tracking)
• Rust 1.70+ for building
• Administrator privileges (optional, enables the Wire packet preview pane)

Usage

# Basic usage
psnet

# For packet inspection (Wire preview), run as Administrator
# Right-click PowerShell → "Run as Administrator"
psnet

The app starts on the Traffic tab by default. Press Tab to switch to the Connections view. The speed graphs and wire preview are always visible.

Running as Administrator

The Wire preview pane (bottom) captures raw packets to show you actual data flowing through your network. This requires Administrator privileges. Without admin, the Wire pane shows a friendly message:

⚠ SIO_RCVALL failed (requires Administrator privileges)  │  Run as Administrator to enable packet inspection

Everything else works perfectly without admin.

Keybindings

Global

Traffic Tab

Connections Tab

How It Works

PSNET combines multiple Windows APIs and techniques to give you a complete picture of your network activity — all without requiring external packet capture drivers.

Connection Tracking

Uses GetExtendedTcpTable and GetExtendedUdpTable from iphlpapi.dll to enumerate all TCP and UDP connections system-wide, including the owning process ID for each.

Process Resolution

Resolves process names via QueryFullProcessImageNameW from kernel32.dll, with a sysinfo crate fallback. Failed lookups are retried every tick rather than cached permanently.

DNS Resolution

Dual-source approach:

1. Fast path: DnsGetCacheDataTable + DnsQuery_W from dnsapi.dll — reads the OS DNS resolver cache directly (every tick)
2. Thorough path: Parses ipconfig /displaydns output (every 10 ticks) — catches entries the API might miss

Traffic Events

Diff-based detection: each tick, the current connection set is compared to the previous tick's snapshot. New connections emit OPEN, disappeared connections emit CLOSE, and state changes (e.g., SYN_SENT → ESTABLISHED) emit STATE events.

Packet Sniffing

Raw socket with SIO_RCVALL (promiscuous mode) captures IP packets on the primary interface. The sniffer:

1. Parses IP + TCP/UDP headers to extract source/destination
2. Skips to the payload offset
3. Extracts printable ASCII characters (collapsing binary runs)
4. Filters out packets with too little readable content
5. Stores snippets in a lock-free ring buffer for the UI

Buffer Management

The traffic event log maintains a rolling buffer of 5,000 events. When the buffer is full, the oldest events are automatically removed to make room for new ones. The title bar shows buffer usage like 2,847/5,000 (57%) with color coding:

• Green — under 70% capacity
• Yellow — 70-90% capacity
• Red — over 90% capacity

The Wire preview keeps the most recent 200 packet snippets.

Architecture

psnet/
├── Cargo.toml
└── src/
    ├── main.rs              # Entry point, event loop, terminal setup
    ├── app.rs               # Application state, input handling, update logic
    ├── types.rs             # Shared types (Connection, TrafficEntry, etc.)
    ├── utils.rs             # Formatting helpers (speed, bytes, ntohs)
    ├── network/
    │   ├── mod.rs
    │   ├── speed.rs         # Network speed calculation via sysinfo
    │   ├── connections.rs   # Win32 FFI for TCP/UDP table enumeration
    │   ├── dns.rs           # Windows DNS cache reader + service port map
    │   ├── capture.rs       # Traffic event tracker (diff-based)
    │   └── sniffer.rs       # Raw socket packet sniffer
    └── ui/
        ├── mod.rs           # Master layout
        ├── title.rs         # Title bar with activity indicator
        ├── speed.rs         # Sparkline graphs + dashboard
        ├── connections.rs   # Connection table
        ├── capture.rs       # Traffic event log
        ├── packets.rs       # Wire preview pane
        └── status.rs        # Keybinding status bar

Dependencies

No packet capture drivers. No Npcap. No WinPcap. Zero external runtime dependencies.

FAQ

Q: Why Windows only?
A: PSNET uses Windows-specific APIs (iphlpapi.dll, dnsapi.dll, ws2_32.dll, kernel32.dll) for deep system integration. This gives it capabilities that cross-platform abstractions can't match — like reading the OS DNS cache and enumerating connections with process ownership.

Q: Do I need to install Npcap/WinPcap?
A: No! The main features (connections, DNS, traffic events, speed graphs) use built-in Windows APIs. The Wire preview uses raw sockets which are also built-in — just needs Administrator privileges.

Q: Why do some connections show IP addresses instead of hostnames?
A: PSNET reads hostnames from the Windows DNS cache. If a connection was established before PSNET started, or if the DNS entry has expired from the cache, it will show the raw IP. Over time, as DNS queries happen, more hostnames will appear.

Q: What does the buffer percentage mean?
A: The traffic event log keeps the last 5,000 events. The percentage shows how full the buffer is. At 100%, old events are automatically removed as new ones arrive — you never lose new data.

Q: Why isn't the Wire preview showing anything?
A: The Wire preview requires Administrator privileges. Right-click PowerShell → "Run as Administrator" → run psnet. Also, encrypted traffic (HTTPS/TLS) will be filtered out since it's not readable ASCII.

Built With Love

PSNET is a passion project. If you find it useful, consider:

• ⭐ Starring this repository
• 🐛 Reporting bugs via GitHub Issues
• 🔧 Contributing improvements via Pull Requests
• 📢 Sharing with fellow developers

Contributing

Contributions are welcome! Here are some areas where help would be great:

• 🐧 Linux/macOS support — replacing Win32 FFI with platform-specific equivalents
• 📊 Per-process bandwidth tracking — showing which app is using the most bandwidth
• 💾 Export — save traffic logs to CSV/JSON
• 🎨 Themes — configurable color schemes
• 📦 Package managers — Scoop, Chocolatey, WinGet manifests

License

MIT License — see LICENSE for details.

◈ PSNET — See your network. Understand your network.

Built with Rust 🦀 and love for the terminal.