Universal Flasher
v1.4.0One app to flash ESP32, Raspberry Pi, Flipper Zero, and ADB security gear — plus full OS images to USB.
View on GitHubIndependent hardware & security lab
Security hardware, built like it's already on a shelf.
A one-person lab. Five open-source tools already shipping, plus firmware and a custom board on the bench — all built by LxveAce, in the open.
5Tools shipping
2In development
1Builder
LxveNode · in development
Flagship · v1.9.0-beta · open source
Cyber Controller
Current release: v1.9.0-beta
Flash, control, and coordinate every piece of security hardware on your bench from one dashboard — ESP32 Marauder, GhostESP, Bruce, and more. A protocol-aware serial monitor and a Unified Action Broadcast send one command to every connected radio, across desktop, TUI, and a web remote.
50Firmware profiles
5Flash backends
4Interfaces
Just shipped · v1.9.0-beta
New in v1.9.0-beta
- LxveOS is now a first-class firmware — recognize, flash, and control LxveOS boards end-to-end over the LXVEOS/1 serial protocol, validated on real ESP32 silicon.
- A new Operate console — a single-device control surface with a SAFE/ARMED lamp and two-factor arm; offensive transmit verbs stay locked until the device is ARMED.
- Passive network intel on Targets — OUI→vendor labels, a channel-occupancy survey, and target freshness, all passive.
- A firmware-variant picker on the web flash page — plus CYD board-detection that applies its detected panel, and a reachable Crack Lab JSON export.
- A broad security & reliability hardening sweep — across 50 firmware profiles and 5 backends. Backend and serial control only — Cyber Controller issues firmware CLI commands and never authors radio frames.
On the roadmap
Cyber Controller, on mobile
A companion app to run Cyber Controller from your phone is on the roadmap. Early days — no download yet; I'll show it when it's real.
In development
Node / repeater mesh
A node/repeater system to mesh several ESP32s and extend range and coverage. The nodes stay fully DIY on stock ESP32 — see the hardware below for the optional custom board.
Projects
Four more tools, shipped and in daily use.
Beyond Cyber Controller — all open source, all built by LxveAce.
Headless Marauder GUI
v1.3.4Control and flash an ESP32 Marauder from one standalone app. No Python, no browser.
View on GitHubDead Man's Switch
v1.0.0A dead-man gate for ESP32 security firmware. Wipes flash, SD, and boot chain if you can't authenticate — defensive, owner-only, ships in a simulated-wipe safe mode.
View on GitHubSecure Delete
v0.3.4A crypto-erase vault that destroys the key instead of scrubbing bytes, with an optional TPM/hardware root. Honest about what an SSD can and can't guarantee.
View on GitHubHardware · in development with PCBWay
Board development, out in the open.
We're building open ESP32 hardware with PCBWay as fab partner. It's on the bench, not in a store — nothing here claims to work or is for sale until there are real boards to show.
Node-meshIn development
Node / repeater boards
Custom boards for Cyber Controller's node/repeater mesh. The nodes are and stay fully DIY on stock ESP32 — the board is just a cleaner, more capable option. Coming as a DIY kit and a preassembled kit.
LxveNodeIn development
LxveOS & the LxveNode board
Our own firmware for the ESP32 + BW16 platform (2.4 and 5 GHz), plus the board designed around it. Built on the open work of justcallmekoko's Marauder, ESP32-DIV, and others — credited properly, not competing with them.
Open by default: the software stays open source, and the nodes stay buildable on hardware you already own.
Hardware in collaboration with PCBWay — from research and prototyping to production runs.
About the lab
One builder. No investors. No shortcuts.
LxveLabs is a small, independent lab — hardware and security tools, built by LxveAce. Self-taught, built in the open, and shared with the people who use this stuff. Cyber Controller is the center of it; everything else grows around that.
Responsible use comes first: these tools are for authorized testing on hardware you own or have permission to test. No exploit recipes, no jammers.
More to explore
Two more corners of the lab — each on its own page.
Coming soon
Store
Boards and kits, built with PCBWay — LxveNode, node/repeater boards, and the free, open-source LxveOS firmware. See what's on the way.
Visit the store CommunityShowcase
Builds, demos, and field shots from the community and me. See what people are making with the tools — and submit your own.
See the showcase