It’s easy to keep cords and cables out of sight but close at hand with the cable outlet at the back. You can mount the legs to the right or left, according to your space or preference. Drawer stops prevent the drawers from being pulled out too far. Can be placed anywhere in the room because the back is finished. You can extend your work surface by combining desks and drawer units. All desks and drawer units in the MICKE series are the same height. Designer Henrik Preutz Table top/ Side panel/ Bottom panel: Particleboard, Particle- and fiberboard with honeycomb paper filling (100% recycled paper), Fiberboard, Acrylic paint, Plastic edging, Plastic edging Supporting leg: Particle- and fiberboard with honeycomb paper filling (100% recycled paper), Fiberboard, Acrylic paint, Plastic edging, Plastic edging Cable management/ Back rail/ Shelf/ Front: Particleboard, Paper foil, Plastic edging, Plastic edging Drawer side/ Drawer back: Paper foil Drawer bottom: Fiberboard, Acrylic paint Leg: Steel, Epoxy/polyester powder coating Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth. For increased stability, re-tighten the screws about two weeks after assembly and when necessary. This product has been developed and tested for domestic use. Assembly instructions MICKE Desk 302.130.76