It’s easy to keep sockets and cables out of sight but close at hand with the cable outlet at the back. You can mount the storage unit to the right or left, according to your space or preference. Air ventilates effectively around your computer or other equipment because of an opening in the back panel. Drawer stops prevent the drawers from being pulled out too far. You can extend your work surface by combining desks and drawer units. All desks and drawer units in the MICKE series are the same height. You can adjust the shelves to fit different things, and adjust them again whenever you need to. Adjustable shelves help you use your space more efficiently. Designer Henrik Preutz Table top/ Side panel/ Bottom panel: Particleboard, Particle- and fiberboard with honeycomb paper filling (100% recycled paper), Fiberboard, Acrylic paint, Plastic edging, Plastic edging Supporting leg: Particle- and fiberboard with honeycomb paper filling (100% recycled paper), Fiberboard, Acrylic paint, Plastic edging, Plastic edging Cable management/ Back rail/ Shelf/ Front: Particleboard, Paper foil, Plastic edging, Plastic edging Drawer side/ Drawer back: Paper foil Drawer bottom: Fiberboard, Acrylic paint Leg: Steel, Epoxy/polyester powder coating Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth. For increased stability, re-tighten the screws about two weeks after assembly and when necessary. When used with an add-on unit, the whole combination must be secured to a wall to avoid the risk of tipping. This product has been developed and tested for domestic use. Assembly instructions MICKE Desk 802.130.74