SLÄKT bed frame w/storage+slatted bedbase, white, Twin - IKEA US

The drawers are easy to open and spacious enough with room for toys, clothes and other gadgets that teenagers usually like to "store" on the floor. Soft edges, recessed handles and just a few visible fittings make the bedframe safe and give it a clean design. You can easily adapt the timeless look based on your taste and personal style by completing with different bed textiles, pillows and accessories. The shelf section can be attached at the headboard or footboard of the bed. If you need extra storage close at hand, you can hang MÖJLIGHET bed pocket over the headboard or footboard of the bed. You can also use the bed as a room divider since the back is covered and lacquered in the same color as the rest of the frame. If you have a thick rug, the drawers at the bottom are still easy to open since the bottom of the frame is slightly higher. Designer Ebba Strandmark/IKEA of Sweden Slatted bed base is included. Mattress and bedlinens are sold separately. LURÖY slatted bed base is included in the price, but is packaged separately. Max load indicates static weight, in other words the load which the bed withstands if you lie or sit on it. Bed frame with storage Footboard/ Headboard/ Drawer front: Fiberboard, Acrylic paint Bedside: Particleboard, Acrylic paint, Acrylic paint, Paper foil, Plastic edging Back part: Fiberboard, Particleboard, Honeycomb structure paper filling (100% recycled), Acrylic paint, Paper foil, Acrylic paint, Paper foil, Plastic edging Rail: Fiberboard, Particleboard, Plastic foil Side: Particleboard, Acrylic paint, Acrylic paint, Plastic edging Shelf: Fiberboard, Particleboard, Acrylic paint, Acrylic paint, Paper foil, Plastic edging Bottom: Particleboard, Fiberboard, Acrylic paint, Acrylic paint, Paper foil, Plastic edging Back: Particleboard, Acrylic paint, Paper foil, Plastic edging Drawer side: Particleboard, Plastic foil, Paper foil, Plastic edging Drawer back: Particleboard, Plastic foil, Paper foil Drawer bottom: Fiberboard, Acrylic paint, Paper foil Slatted bed base Bed slats: Layer-glued wood veneer, Adhesive resin as coating Ribbon: 100 %polyester To avoid the risk of serious injury, the distance between the bed and the wall must always be less than 2½" or more than 9". It is important not to screw hooks or handles onto the bed or hang ropes or belts in which children can get caught when playing. This slatted bed base is to be used with an IKEA bed frame. If used with another bed frame, please check construction. Assembly instructions SLÄKT Bed frame with storage 103.629.82 Advice and care instructions SLÄKT Bed frame with storage 103.629.82 SLÄKT Bed frame with storage 103.629.82