Can be used in damp areas indoors. Only for indoor use. Possible to separate for recycling or energy recovery if available in your community. Cabinet with doors Top panel/ Side panel/ Door/ Bottom panel/ Frame: Galvanized steel, Epoxy/polyester powder coating Back panel/ Shelf: Steel, Epoxy/polyester powder coating Work bench with drawers Main parts: Galvanized steel, Epoxy/polyester powder coating Table top: Pine plywood Work bench with drawers Wipe clean with a soft cloth dampened with water and a mild dish detergent or soap, if necessary. Cabinet with doors Wipe clean with a soft cloth dampened with water and a mild dish detergent or soap, if necessary. For maximum quality, re-tighten the screws when necessary. Must be secured to the wall. Different wall materials require different types of hardware. Use fixing devices suitable for the walls in your home, sold separately. This storage unit has been developed and tested for office use and meets the requirements for durability and stability set forth in the following standards: EN 14073, EN14074, ANSI/BIFMA x5.9 and ISO-7170. Assembly instructions BROR Cabinet with doors 504.942.97 BROR Work bench with drawers 704.943.00