2.4M views · 94K likes | Wendy Louw on Instagram: "The latest DIY project, a couch console wired with a power point 💪⚡️🔌🛋 2x Pine planks (3000x144x22) - one plank is for the top length of your couch, the other is cut down into 3 legs the height of your couch. Remember to measure your couch length, but add the width of your legs if the console is going over your couch, plus about 20mm on each end for some clearance. 8x Metal 90-degree brackets (I use size 80x80x2.5) - you need 2 brackets per leg and 2 brackets to attach to the wall. 2x Flat corner bracket (75x75) - for the back 2 corners for extra support. 1x Flat T bracket (75x75) - for the back leg for extra support. 36x Wood screws - remember that they can not be longer than the width of your wood. 1x Plug point of your choice a
We think you’ll love these