Magnetic resonance elastography (MRE) is a phase-contrast-based MRI imaging technique
that can directly visualize and quantitatively measure propagating acoustic strain waves in …

Partial cavitation reduces hydrofoil friction, but a drag penalty associated with unsteady cavity
dynamics usually occurs. With the aid of inviscid theory a design procedure is developed …

… An analysis of scale effects on cavitation is done with use of a numerical method developed
for sheet cavitation in viscous fluid (Amromin 7,8). This method allows a comparison of …

The successful designs of hulls for ships employing drag reduction by air bottom cavitation
have been based on solutions of inverse problems of the theory of ideal incompressible fluid. …

An experimental study of air supply to bottom cavities stabilized within a recess under a
horizontal surface has been carried out in a specially designed water tunnel. The air supply …

… The zone locations are defined by the following criteria:(1) 1.1 δ ∗ R e + δ ∗ U d U d s = δ ∗
3 [ 1 + cos ( β ) ] 2 ( 0.0164 … All contributions to this paper were provided by Eduard Amromin. …

… Vector E* is located in a tangent plane to S*. E* is the tangent to intersection of S C with the
surface … The cavity detachment l 1 (E*) is defined, but the cavity end l 2 (E*,σ) is subjected to …

… Letter T means theory (our computation) and E means … Letter T means theory (our computation)
and E means … Letter T means theory (our computation) and E means experimental data. …

… 6B), this gradient must be taken into account there and a more complex criterion was derived
and described by Amromin (Amromin, 2007):(11) 1.1 δ * R e + δ * U d U d s = δ * 3 [ 1 + cos …

Bottom ventilated cavitation has been proven as a very effective drag reduction technology
for river ships and planning boats. The ability of this technology to withstand the sea wave …