Node localization is the basis of a variety of applications as an important technology in
wireless sensor networks. This paper studies the existing localization algorithms, and puts …

Thanks to its simplicity and real-time processing possibility, mean shift has been widely used
for video tracking. However, it often fails when the background is similar to the intended …

… This study proposes a data-driven capacity estimation method only using 10-min relaxation
voltage data, which is adaptable to the high state of charge (SOC) range. The experiments of …

Under 980 nm laser excitation, red emission ( 5 D 0 – 7 F J (J=0, 1, 2)) of Eu 3+ was observed
in cubic Y 2 O 3 codoped with Eu 3+ and Yb 3+ . The dependence of the upconverted …

… be respectively achieved within 1 min, demonstrating the … with peak capacity of 120 in 30
min on a 15 cm-long column. … extracts from Escherichia coli in 5 min. All these results indicated …

… min. The mixture was left at room temperature in dark for 30 min and centrifuged at 14,000 g
for 15 min … and sample was shaken at 600 rpm for 1 min. The mixture was left at 37C for 16–…

Bi 3+ and Yb 3+ codoped cubic Y 2 O 3 phosphors are prepared by pechini sol–gel method.
Strong near-infrared (NIR) emission around 980 nm from Yb 3+(2 F 5/2→ 2 F 7/2) is …

Y 2 O 3 : Eu 3+ powders were synthesized by combustion method and the influence of
dispersant was investigated. XRD analysis indicated that the particle size increased with a small …

… The microarrays were washed with PBST three times for 5 min each and were incubated …
by three 5-min washes in PBST. The microarrays were spun dry at 250×g for 3 min and were …

… 20 min. The reaction was stopped in boiling water for 10 min. One unit of total levansucrase
activity is defined as the amount of the biocatalyst to produce 1 μmol of glucose per minute. …