Farmhouse TV Stand Build Plans (sliding barn doors)

This is a DIY TV Stand I have built and sold to many different customers. It is easy to build for intermediate woodworkers and no high-end tools are mandatory (although it can make the job easier if you have them). The stand will measure 50" in length 17 1/4" in width and 29" in height. (50" x 17 1/4"x 29") The method of jointing used is pocket hole screws and wood glue. The wood materials used are 2 x 4's, 2 x 6's, 3/4" plywood, and 1/2" plywood for the frame and 1 x 6's and 1/4" plywood for the top, shelves, and doors. I strip my 2 x 4's to get 2 x 2's where needed and strip my 1 x 6's to create the top pieces and shelves as well as the doors. NOTE: This is a DIY PDF document of build plans and NOT a physical item. There will be NO refunds. Tools and Supplies Miter Saw Table Saw Drill ¼" Impact Driver Pocket Hole Jig Router Brad Nailer ¾" round over and ⅛" straight bit Bar clamps Face clamps Wood Glue 2 ½" Pocket Hole Screws 1 ¼" Pocket Hole Screws Tabletop fasteners 4' double barn door railing ½" Staples 2" brad nails 1 - 2 x 4 10' 1 - 2 x 4 6' 1 - 2 x 6 4' 4 - 1 x 6 12' 1 - ¾" sheet Plywood 1 - 2 x 2 sheet ½" Plywood 1 - 2 x 2 sheer ¼" Plywood