Search Results for "driver"

SoundStepper is a "100% software" telescope controller, for Windows, using audio hardware to control step motors at real time. All it requires to operate are external step motor drives, which can be a commercial "pulse/direction" drive or analog current amplifiers. Documentation: http://soundstepper.sourceforge.net/

INDI is an instrument neutral distributed interface control protocol that aims to provide backend driver support and automation for a wide range of Astronomical devices (telescopes, focusers, CCDs..etc). Project migrated to Github: https://github.com/indilib/indi

An astronomical Open source Delphi project for : robotic telescope, autoguiding, astrophotography and advanced astronomical image processing. It is developing continuously by author. Some other astronomical test, ideas and source code => See my site for new informations (for amateur and Delphi programmers.) New: STAFImage : image process and blinkcomparator for astrophotographer Some other astronomical test, ideas and source code => See my site for new informations (for amateur and...

ASCOM driver for the LittleFoot Elegance Photo (LFEP) telescope controller. Firmware 6.x is fully supported - firmware 5.x is partially supported (all LFEP features are available but configuration is only possible by handbox). Contains drivers for telescope, focuser, camera, filter wheel, roof controller and dew heater which shares a single connection to the controller.

It provides an USB connection for the communication with the PC, it uses a stepper motor that provides higher precision, you can set the motor in full step or in microstepp mode (1, 1/2, 1/4, 1/8). The focuser include a temperature sensor. This driver has a ToolBox with which you can control manually the focuser (for example you can set the limits).

Drivers and applications for the range of Scientific CCD cameras produced by Apogee Instruments Inc. Both ISA and Parallel interfaces are supported. A high level library and GUI are provided for Astronomical applications.

AstroEasyCap is an optimized linux easycap DC60 driver for astronomical purpose. It comes from the great easycapdc60 driver written by rmt1947. Features : integration control using a TTL output, bypass frame processing, gray-scale optimized mode...

lin-seti is a command-line program allowing to mantain a cache of work units for the Seti@Home client. Written in C, it should run on most unix-like systems, including linux. It is designed to be cache-compatible with 'Seti Driver' for Windows.

libscmodcam provides an easy way for Linux applications to capture long-exposure frames from a Philips USB webcam (if it is supported by the PWC kernel driver). Currently only the SC1 modification and the C++ language are supported.

Source code and diagrams for a dual focuser motor controller for a telescope. Includes source for an ASCOM driver that interfaces with the controller.