Search Results for "cisco ios"

This project contains a set of php/perl scripts to analyze Cisco IOS-XR routers PE configuration, providing an html output which is very useful to surf over configurations. Moreover, it contains some other functions to search and compare configurations (access-list, prefix-sets, route-maps ...) between XR and IOS routers, and to analyze syslog data. It is not intended for "normal" end-users, but for network administrators and operations groups. You will need to install Apache (or any other...

CLI based, recursive mapping/discovery of network devices via SNMP(CDP/OSPF/BGP MIBs). SNMP(LLDP MIBs), telnet, and SSH are to follow, along with multi-vendor support (right now only supports cisco devices). Requires Perl and Net::SNMP, Net::SSH, and Net::Telnet modules.

Archivist is a network device configuration archiving program, using Subversion as revision control system. You can use Archivist to back-up and track configuration changes made on routers and switches in your network. Thanks to multithreaded operation, Archivist can be quite fast. In a few minutes, you can check and archive configuration of more than 2 thousand devices. Supported are: Cisco IOS, Cisco NX-OS, Cisco CatOS, Cisco FWSM, Cisco ACE, Juniper JUNOS and Brocade/Foundry MLX series...

This is a collection of three Perl scripts used to ease IOS switch migrations by tracking connected hosts before and after migration and recommending (or automatically applying) configuration changes based on where the hosts moved.

Parse through Cisco IOS-style configurations and retrieve portions of the config using a variety of query methods. Note: starting January 2010, we have moved development to http://bitbucket.org/mpenning/ciscoconfparse/. Please update your hyperlinks.

cisto (CIsco Script TOol) tool for managing cisco devices (IOS,CatOS). Allows to get configs, do configuration, install new images, change passwords, do single or list of show commands and lots more for a given list of devices (running parallel proz.).

SAA collector is a set of perl programs that can automatically detect SAA probes running inside Cisco IOS machines with the Service Assurance Agent feature, collect the available measurements and store them in a database.

OECE is a Cisco IOS interface simulator. Useful for beginner to Cisco's IOS command line interface. Supports basic commands like 'enable', 'configure terminal'. It has FULL support for keyboard shortcuts, command shortcuts, history, errors and more.

This project is to create a Linux based Router Configuration Management System for Cisco Routers (initially supporting router IOS 12.0+). The project was written in bash and perl scripting but has now been rewritten in Ruby, and makes use of Linux system

CARMA VPN is a network management program written in PERL and CGI to assist in the implementation and management of a large fully meshed, fault tollerant, VPN network. The base network platform that CARMA VPN was developed for is Cisco IOS.

windCMT is a pure perl based network device config backup utility. Needs no external (non-perl) tools except for OpenSSH (optional). It currently supports Alteon's WebOS and Cisco (CatOS, IOS, PIX, CSS). www.schwartzsoft.com/index.cgi?page=windCMT

Tools for Cisco IOS devices management. Short device inventory listings; ATM: PNNI topology reports, complete VCC reference, VCC status report, VCC tracking tool; MPLS: TDP/LDP/IS-IS topology reports, VRF inventory reports; Cisco72XX bandwidth points ana