Open Source Mac Hardware Platforms - Page 10

Firmware and Hardware for an MP3 player using an AVR Butterfly, VS1001K decoder and SD/MMC card with FAT filesystem.

Object-oriented semantical AVR programming library. Developers needed!

This code programmed into an AVR microcontroller wired to the receiver's JTAG port allows loading unsigned code on SMP8634 based media receivers enabling you to boot other operating systems e.g. Linux. (Only x30Xt receivers are currently supported)

It's a software/hardware project to turn the Atmel AVR8 controllers into something simmilar to a home-computer. Currently connecting a TV-Monitor and a keyboard is supported. It is also meant to serve as a future cheap computer alternative.

This is an independent project focusing on the development of drivers which allow the ActiveWire board (sold by ActiveWire, Inc.) to be used on OS X. ActiveWire, Inc. never updated the drivers from their OS 9 version, thus this project began.

AIC (Advanced Irrigation Controller) is a computer based control system that has been initially targeted towards controlling irrigation in small to medium size gardens. As the product matures and features are added it is expected to be a fully functional controller used in large scale implementations, green houses and glass houses. AIC platform's in-dependency means it can run on both Linux or Windows XP onwards . A large range of serial boards (as well as usb boards that present as serial devices) are able to be controlled. KMTronic's USB and Serial relay boards are selectable in the configuration menu, other boards can be setup by entering their control commands. Although primarily designed for irrigation you can use AIC to control a large variety of hardware, for example lighting, heating etc It is envisaged that future implementations of AIC will incorporate rules for more complex device control.

Agnix is a small operating system kernel for i386, supporting 32-bit protected memory mode, paging, hardware switched tasks, memory tests, PCI bus, devices, PCI IRQ routing, RT timers and network protocols.

Linux Driver and control program for the Antec H20 - 920 Series liquid coolers.

AppleIntelX4500 Develloppent Driver for GMA X4500MHD on Mac OS X with QE/CI.

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. This work is a result of collaborative effort between Chair for Embedded Systems (CES) at Karlsruhe Institute of Technology (KIT), Germany and Vision Image and Signal Processing (VISpro) Lab at SEECS-NUST, Pakistan.

We live in very exciting times 😃! BLDC motors are entering the hobby community more and more and many great projects have already emerged leveraging their far superior dynamics and power capabilities. BLDC motors have numerous advantages over regular DC motors but they have one big disadvantage, the complexity of control. Even though it has become relatively easy to design and manufacture PCBs and create our own hardware solutions for driving BLDC motors the proper low-cost solutions are yet to come. One of the reasons for this is the apparent complexity of writing the BLDC driving algorithms, Field oriented control (FOC) being an example of one of the most efficient ones. The solutions that can be found online are almost exclusively very specific for certain hardware configurations and the microcontroller architecture used. Additionally, most of the efforts at this moment are still channeled towards the high-power applications of the BLDC motors and proper low-cost FOC.

This is a sketch for Arduino that allows for the user to have multiple sketches on their Arduino, and then switch between them. For a video go to (coming soon). Requires Arduino 0022 or later to use get Arduino here: www.arduino.cc

A multi-platform command-line programmer for Atmel (8051, AVR, XMEGA & AVR32) chips with a USB bootloader supporting ISP. This is a mostly Device Firmware Update (DFU) 1.0 compliant user-space application. This project has now migrated to GitHub. You can find the new repository at https://github.com/dfu-programmer/dfu-programmer

A simple tool to convert sysex parameter settings of Behringer's BCR2000 Midi controller.

This program works on command line and helps people to upgrade and recover their D-Link's modems. It's stand-alone and doesn't require web-servers or other stuffs.

BTnodeRFID provides a mobile RFID reader for the ISO 15693 RFID standard with a Bluetooth interface based on existing hardware components. Software libraries to access the reader for J2SE, J2ME and Symbian platforms are included.

An API for manipulating EDIF netlists in Java. We use this API to analyze netlists as a part of our FPGA reliability project. We intend to keep the API as general as possible to support other netlist analysis and manipulation activities. This material is based upon work supported by the National Science Foundation under Grant No. 0801876. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.

This Java program calculates the SPBRG value for a given baud rate (Baudrate) and clock frequency. It comes with a graphical interface and a simple value interpretation guide. A Java Webstart file (.jnlp) is provided.

This package is a development package for Java to use BeeBox on Java platforms.

Feel pictures free of charge - SeebyTouch is the unique open source tactile vision substitution system available! Using the software and the construction manual it is possible for everyone to get pictures over the tactile sense! - Blindensehersatzsys

BlowfishVHDL - free fully synthesizable Blowfish encryption algorithm hardware implementation.

This is a C# library dedicated for using with a www.canusb.com device Full notes: See ReadMe.txt Summary The LAWICEL DLL is 'unmanaged code' and was not designed for use by C#/VB/Mono http://en.wikipedia.org/wiki/Managed_code If you wish to call 'unmanaged code' from 'managed code', you need to use a 'C# wrapper' to access the DLL. This wrapper uses 'PInvoke' (like peek/poke) to 'martial' calls from managed to unmanaged code. It sounds complicated, and it is. IT IS ALSO TOTALLY UNNECESSARY. Why not have the DLL as managed code?? Why not simply reference the library in your project and just call its functions?? This project does just that Licence: LGPLV3.: In summary, the only thing we ask is if you improve / bugfix / extend the library then feed these changes back into the project by emailing jon_newcomb or requesting sourceforge access. Applications you develop that use this library are not covered by this licence and can remain closed source and commercial

This project defines a Standard API for access to the CAN (Controller Area Network) bus. The API provides functionality for ISO/OSI Layer-2 (Data Link Layer). The project is now hosted on GitHub: https://github.com/canpie/CANpie

CCFLDimmer is a software/hardware combination to control addon lighting equipment for low-lit pc workspaces and hardcore case-modding fans.