Search Results for "c--"

MQTT-Hyperdash is a fast and efficient dashboard (GUI) for the MQTT framework. It uses the SDL library for graphics rendering, the paho library for communication and the gtk2 framework for user input. The dashboard runs on Linux, but a port to other operating systems is possible. Special features: * Very simple and basic set of base elements. * animated analog input elements, potentiometers. * Fast update rates of 20 Hz are possible. * Easy to use: Each panel/dashboard is...

... Pi Zero wifi Plug and Play capability complete with MBLogic, Node-RED and MQTT already fully installed and ready to go. See wiki instructions to burn the SD Card image file, insert into your RPi Zero and Plug and Play. The iHome is an Internet of Things (IOT) demo project for the ionware ionC1 hardware and the software system and is a complete SCADA platform c/w Modbus TCP Servers and Modbus RS485 serial clients for scalable building automation projects. See - ionware.io/free-offer/

GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) &...

JSTx is used for displaying overlay graphics and text on top of a Philips television, changing channels, receiving remote control keys and changing television display modes. It is a command line utility to execute jointSPACE commands on a device that supports the jointSPACE protocol for Philips televisions (see http://jointspace.sourceforge.net for details on jointSPACE, which is based on DirectFB). It is used in various home automation/internet-of-things projects. There are three...

Firmware for ESP8266 modules. http://www.esp8266.nu/index.php/Tutorial_ESPEasy_Firmware_Upload Use an ESP8266 module as a wireless sensor for temperature, humidity, barometric pressure, LUX, etc. Or use it as an actuator to control Relays. Supports the following Home Automation platform protocols: * Domoticz HTTP * Domoticz MQTT * OpenHAB MQTT * PiDome MQTT * Nodo Telnet * ThingSpeak webservice * EmonCMS * FHEM HTTP * Generic HTTP using templates Supported devices: *...