Open Source Linux Libraries

openSCADA is an open source Supervisory Control And Data Acquisition System. It is platform independent and based on a modern system design that provides security and flexibility at the same time. openSCADA is flexible. It is not an out of the box solution, but a set of tools that can be combined in many different ways. It provides development libraries, interface applications, mass configuration tools, front-end and back-end applications. openSCADA is ready to rock. It is used 24/7 in several installations around this world. openSCADA is supported. So if you prefer a fully supported, out of the box instead of a “build it yourself” solution you can contact IBH SYSTEMS GmbH and let us do the job. If you like, you will still get the source code that was developed specially for you. openSCADA needs you. Writing source code, writing documentation, fixing bugs or providing fresh input. Anything is welcome.

SCL Manipulation and Configuration Tools, is a set of libraries and applications that allows to create and modify XML files witch use Substation Configutation Language based on IEC61850 part 6 standart.

MultiCAN implements a CAN Bus device support for EPICS. EPICS is a framework for control systems, the CAN Bus is a reliable real-time field bus. The ‘Multi’ und MultiCAN stands for ‘Multi Protocol support’, so it supports more than one protocol for CAN Bus communication. MultiCAN has support for the CANOpen protocol and the older CAN Application Layer (CAL).

This CAN bus library for Linux that implements higher level functions for writing CAN Bus applications. It is based on the SocketCAN interface, that is part of the Linux kernel.