Search Results for "c--"

serialconsole (sc) is a minimal terminal program allowing to use one machine to access the serial console of another machine.

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can...

This project provides three different interfaces for programming embedded chips: a GObject based library (for developers), an executable binary (for computer geeks) and a GTK+3 front-end (for less geeky users). Actually NXP LPC and STM32 based chips are supported.

This project has been moved to GitHub. See: https://github.com/crayzeewulf/libserial/

A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it.

Immersion Cooker Mk II: A food-oriented, feature-rich water-bath controller for slow cooking sous vide. Cook just about anything to perfection with open source hardware and software.

HW(VHDL) and SW of logic analyzer and On-Chip-Verification(OCV) for Value Change Dump(VCD) file format that exported to seemd SystemC ,ModelSIM, and many other EDA tools. Very easy and Simple.

The goal of zAutomation project is to design/implement hardware, firmware and software for remote control and monitoring of physical objects, by using the ZigBee technology and internet. The field of application is robotics and domotics.

se290 is a tool for uploading files into Sony Ericsson(tm) phones.

A collection of tools to tokenize PBASIC source code and send it to a BASIC Stamp microcontroller.

A portable library to access braille displays.

SerialPortNet is an open source serial port communication library for Microsoft .NET. It's written in c#, implements complete .NET 2.0 specifications, and is designed to allow for multiple OSes and add-on 3rd party Serial to Network adapters.

Mprog is a tool designed for programming microcontroller. At the moment it supports only Atmel AVR microcontroller It support read / write programm flash / eeprom. To file firmat are supported: binary & Intel hex.

The MtxOrbCtl program allows you to control a Matrix Orbital Serial LCD screen from the command line. It is designed to be used in conjunction with shell scripting to show the status of boots, etc.

There are different files supplied. One program for webcam controlling inline with the orginal idé. And different help classes if you would like to do something yourself. Also a general package of classes to communicate with the RS232 port.

Columbo Simple Serial Library is an easy to use, event driven serial port communication library for Linux.

Ssnooper is a program to created to aid in the debugging of serial line (RS232) connections. With ssnooper, a computer with two free serial ports can be connected between two serial devices to intercept and log all communications.

Miniboard Utility. Uploader and Monitor program for Mini Board and Motorola's MC68HC811E2 microcontroller.

This project contains the Linux serial driver for 8250/16550 (and compatible) UARTs. It is packaged in a stand-alone form that can be used with older and newer kernel versions. It also serves as a focal point for further serial driver development.

setserial is a program designed to set and/or report the configuration information associated with a serial port.