Open Source Mac Wireless Software

airgeddon is an alive project growing day by day. Interface mode switcher (Monitor-Managed) keeping selection even on interface name changing. DoS over wireless networks using different methods (mdk3, mdk4, aireplay-ng). "DoS Pursuit mode" is available to avoid AP channel hopping (available also on DoS performed on Evil Twin attacks). Full support for 2.4Ghz and 5Ghz bands. Assisted WPA/WPA2 personal networks Handshake file and PMKID capturing. Cleaning and optimizing Handshake captured files. Offline password decrypting on WPA/WPA2 captured files for personal networks (Handshakes and PMKIDs) using a dictionary, brute-force, and rule-based attacks with aircrack, crunch and hashcat tools. Enterprise networks captured password decrypting based on john the ripper, crunch, asleap and hashcat tools. GPU support available for hashcat. Only Rogue/Fake AP mode to sniff using external sniffer (Hostapd + DHCP + DoS).

Scan for WiFi devices, block selected connections, create dozens of networks and confuse WiFi scanners! Version 3 is in development. It is stable to use, but it is very different. It is command-line based, which allows it to offer not just more features, but make them more customizable. This software allows you to easily perform a variety of actions to test 802.11 wireless networks by using an inexpensive ESP8266 WiFi SoC (System On A Chip). The main feature, the deauthentication attack, is used to disconnect devices from their WiFi network. No one seems to care about this huge vulnerability in the official 802.11 WiFi standard, so I took action and enabled everyone who has less than 10 USD to spare to recreate this project. I hope it raises more attention on the issue. In 2009 the WiFi Alliance actually fixed the problem (see 802.11w), but only a few companies implemented it into their devices and software.

Crack Wi-Fi networks that are secured using weak passwords. It is not exhaustive, but it should be enough information for you to test your own network's security or break into one nearby. Begin by listing wireless interfaces that support monitor mode. If you do not see an interface listed then your wireless card does not support monitor mode. Start listening to 802.11 Beacon frames broadcast by nearby wireless routers using your monitor interface. WPA/WPA2 uses a 4-way handshake to authenticate devices to the network. You don't have to know anything about what that means, but you do have to capture one of these handshakes in order to crack the network password. These handshakes occur whenever a device connects to the network. The final step is to crack the password using the captured handshake. If you have access to a GPU, it is highly recommended to use hashcat for password cracking.

BlueCove is a JSR-82 implementation on Java Standard Edition (J2SE) on BlueZ Linux, Mac OS X, WIDCOMM, BlueSoleil and Microsoft Bluetooth stack on WinXPsp2 and newer. Originally developed by Intel Research and currently maintained by volunteers.

A java wrapper for popular "libpcap" and "WinPcap" libraries. Accurate full API translation. Packet buffers delivered with no copies. Send custom packets, gather statistics. Comprehensive and easily extensible DPI engine.

Easy HotSpot, A super easy WiFi hotspot user management utility for Mikrotik RouterOS based Router devices and works using the PHP PEAR2 API client by boenrobot. This PHP/MySql/Bootstrap based package can be installed in any supporting OS in a local webserver of the client or in any internet based webservers of choice. Put the contents/source code in the root or in a sub folder of the host/domain, as required. A MySql database need to be created in order to work, but the package will create the database, if one doesn't exist on initialisation. The details of the database need to be given in the dbconfig.php file by editing it. The details of the router device also need to be entered in the config.php file prior to operations. A preliminary visual documentation is available at http://hotspot.zetozone.com Easy HotSpot is suitable for WiFi hotspots of any size and capacity, but equipped with a MikroTik routerOS based device.

################################### WHAT IS CONNECTINY ? ################################### With Connectiny Hotspot, you can transform your PC into a real WiFi hotspot, and share your computer’s Internet connection as Wi-Fi with any other PC or mobile device. ########################################### HOW DOES CONNECTINY HOTSPOT WORK ? ########################################### Connectiny Hotspot turns your computer into a real WiFi router. Thanks to the “Virtual WiFi” technology that’s built into Windows 7 and up, your computer can create a WiFi hotspot, even while it stays connected to another WiFi network. However, Connectiny Hotspot is a lot more than just a wrapper around these command-line tools. • Easily Create a Wi-Fi Hotspot and Connect all your Devices. • Share Any Type of Internet Connection. • Enjoy Safe and Secure Sharing . THANK YOU for support ♥ ♥

WPAGen is a wifi password generator written in Python. It runs in the terminal and has very few dependencies other than Python itself, and if you're using the compiled binary you don't even have to have Python installed. I digitally sign some files in my releases. If you'd like to verify those signatures, you can find my PGP/GPG keys at: https://marcusadams.me/keys.html If you'd like to donate there's several ways to do so: PayPal: https://paypal.me/gerowen Bitcoin (BTC): bc1q86c5j7wvf6cw78tf8x3szxy5gnxg4gj8mw4sy2 Monero (XMR): 42ho3m9tJsobZwQDsFTk92ENdWAYk2zL8Qp42m7pKmfWE7jzei7Fwrs87MMXUTCVifjZZiStt3E7c5tmYa9qNxAf3MbY7rD

----注意:最好不要在此站下载，建议到百度云网盘下载---- Wifislax是来自西班牙的Linux系统，它包含了各种各样的安全和诊断工具。集成网络驱动程序，基本支持所有无线网卡。集成大量无线破解软件。 http://bbs.wuyou.net/forum.php?mod=viewthread&tid=336776 百度云下载地址http://pan.baidu.com/s/1oHs2U

OpenMAC is a TinyOS-based implementation of IEEE 802.15.4 MAC layer, which lies at the core of MeshNetics ZigBee stack, and provides basic wireless networking (star,peer to peer) to WSN's. Available for low-power ZigBit modules and Atmel AVR Z-Link Kits

As of Jan 2009, this project and NanoStack 1.x are no longer being actively developed or maintained. Instead there is an effort to add support for Sensinode/cc2430 hardware for the Contiki OS. http://www.sics.se/contiki/

Moved to https://github.com/jbthomsen/WiresharkZigbeeUtility Utility enabling easy capture and monitoring of Zigbee frames in Wireshark. This simple utility program implements a named pipe between Wireshark and the Freescale MC1322x USB dongle (support for other devices can relatively easily be added).

A console-based wireless scanner for Apple AirPort Wireless Cards on Mac OS X

AQA-AODV is a new QoS routing protocol for MANETs based on AODV, which creates routes according to application QoS requirements. We have introduced link and path available bandwidth estimation mechanisms and an adaptive scheme that can provide feedback to the source node about the current network state, to allow the application to appropriately adjust the transmission rate. In the same way, we propose a route recovery approach into the AQA-AODV protocol, which provides a mechanism to detect the link failures in a route and re-establish the connections taking into account the conditions of QoS that have been established during the previous route discovery phase.

Using the new C# Dll from swig portability of Openobex/ObexFtp to write a nice GUI able to transfer file between two devices with obex protocol. More Info’s here: http://cs-obexftp.wiki.sourceforge.net/

Web interface written in php for ISC bind and ISC dhcp configuration and administration. It keeps it's own database containing general dns and dhcp information and information about subnets, hosts etc. Configures DNS, DHCP, firewalls, RADIUS servers..

JRemoteControl is a simple Java™ driven bluetooth remote control.It allows you to initiate virtually any task on your PC from a J2ME enabled device.Default configuration supports mplayer on Win and Linux platform.Additional packages are available too.

Mobile Robotics is a java project developing wireless communication using bluetooth between a hand-held (palm, cellular phone) to a Lego Mindstorm device. We intend to bypass the limitations of the IR tower creating a truly wireless mindstorm.

Highly configurable Universal Access Method(UAM) server for Chillispot, CoovaChilli or WifiDog. Contains a Dynamic Walled Garden as well as a system to use PayPal or Google Checkout to purchase time.

Create your own hotspot using your laptop/desktop running Windows and share your internet connection!

This educational software simulates an Ad-hoc network with AODV algorithm, it uses a high level view and only works in Routing layer. it has a user-friendly graphical user interface and has been written in java language.

Add 3.5G USB dongle support on ASUS RT-N13U The RT-N13U UI is good enough, so I don't change much. Only add 3.5G setting in advance setting--> USB Application This FW supports HUAWEI E169 E220, Bandluxe C270, OPTION 225 now.

This project will work on developing ad hoc network capabilities for Apple's iPod Touch and iPhone with goals of developing a chat program.

A Cocoa utility application to display information about the clients of Apple Airport Extreme & Express Base stations

aspoof is a program that modifies the Apple Airport Extreme binary to spoof the MAC address of the wireless card.