Mesh2HRTF-tools Activity
Individual SOFA HRTF related code, tutorials and helpful files.
Brought to you by:
sdx-lv
Activity for Mesh2HRTF-tools
-
3 DJ posted a comment on ticket #4
Another update. Still fails with the same error if I fresh reinstall Python and skip either: pip install sofar pip install pyfar or pip install -e .
-
AttributeError: 'Coordinates' object has no attribute '_points'
-
Sara Ghorbani created ticket #3
Finalize-HRTF-Simulation Issue
-
mAjorHon posted a comment on ticket #2
Hi, you can just send the .obj file to majorhon.officail@gmail.com I'll help you figure out what went wrong.
-
annelucie plenier posted a comment on ticket #2
Hello, I also have problems of convergence with one of my 3D scans ... When I compute NumCalc.exe I don't have any troubleshootings, but then when I launch finalize_hrtf_simulation, it doesnt work because of the non convergence.. I tried to 2 times to make my 3d scan better but it is not sufficient. Can you tell me what do you mean by "trimming the 3D mesh" please ? Thank you !
-
Thank U so much!! As mentioned in the link,the issue was solved when I downgraded pyfar to 0.5.4. Non Convergence was also solved by trimming the 3D mesh. I have got the sofa files. But I still have a question: I put the sofa file in APL Virtuoso or Noisemakers Binaural studio, it sounds like the high frequency is lot more than real auditory, lot more than the default hrtf in the software, as well as the sofa files downloaded from other websites. The EQ spectrum shows that this is indeed the case....
-
Thank U so much!! As mentioned in the link,the issue was solved when I downgraded pyfar to 0.5.4. Non Convergence was also solved by trimming the 3D mesh. I have got the sofa files. But I still have a question: I put the sofa file in APL Virtuoso or Noisemakers Binaural studio, it sounds like the high frequency is lot more than the default hrtf in the software, as well as the sofa files downloaded from other websites. The EQ spectrum shows that this is indeed the case. Is this normal? If not , What...
-
Thank U so much!! As mentioned in the link,the issue was solved when I downgraded pyfar to 0.5.4. Non Convergence was also solved by trimming the 3D mesh. I have got the sofa files. But I still have a question: I put the sofa file in APL Virtuoso or Noisemakers Binaural studio, it sounds like the high frequency is lot more than the default hrtf in the software, as well as the sofa files downloaded from other websites. The EQ spectrum shows that this is indeed the case. What might be causing this...
-
Thank U so much!! As mentioned in the link,the issue was solved when I downgraded pyfar to 0.5.4. Non Convergence was also solved by trimming the 3D mesh. I have got the sofa files. But I still have a question: I put the sofa file in APL Virtuoso or Noisemakers Binaural studio, it sounds like the high frequency is lot more than the default hrtf in the software, as well as the sofa files downloaded from other websites. The EQ spectrum shows that this is indeed the case. What might be causing this...
-
Thank U so much!! As mentioned in the link,the issue was solved when I downgraded pyfar to 0.5.4. Non Convergence was also solved. I have got the sofa files. But I still have a question: I put the sofa file in APL Virtuoso or Noisemakers Binaural studio, it sounds like the high frequency is lot more than the default hrtf in the software, as well as the sofa files downloaded from other websites. The EQ spectrum shows that this is indeed the case. What might be causing this problem?
-
Sergejs posted a comment on ticket #1
Hello, sorry for missing the issue previously, When I see this my first guesses are: If you are playing with multiple overlapping grids (multiple points for the same angle where only radius differs) all of this is untested preview. Basically I made the scripts to show how to simulate the raw data, but as I have no use for multi-radius SOFA files I did not test if all post processing scripts can handle such data, Nor I know how will your software expect multi-radius SOFA file to look like. You just...
-
Hi, Can't say these are your main problems, but: 1. Warning around PyFar version conflict has a workaround - as explained in this ticket: https://github.com/Any2HRTF/Mesh2HRTF/issues/120 2. Non Convergence may actually be critical here - because it affects frequencies below 22.05 kHz - you need at least enough data to export 44.1 kHz SOFA file. If you see something else, please printout which sounds unusual. Also, everything is quite simple, commented Python code - no coding wizzardry. It is often...
-
finalize_hrtf_simulation issue
-
thank you!
-
Sofa file names in AllSofaFiles1 and AllSofaFiles2 sorted alphabetically
-
Teodors Kerimovs posted a comment on merge request #1
Hi! Finally I added version info.
-
Hi, looks good - I assume it works. Could you please add a version information to the file itself? something like # v3.02 20xxxxxxxxx xxxxxxxxxxxxxxxxxxx (by xxxxxxxx) version = 'v3.02' # <<< for printouts. then I will merge it.
-
Two edits marked with comments: #Teodors Kerimovs edit... You can delete those author comments.
-
Two edits marked with comments: #Teodors Kerimovs edit You can delete those author comments.
-
Two edits marked with comments: Teodors Kerimovs edit
-
I don't know, why sourceforge is showing that I am requestion 0 commits, but repo, there are two edits marked with comments: Teodors Kerimovs edit
-
Sofa file names in AllSofaFiles1 and AllSofaFiles2 sorted alphabetically
-
bernd_b posted a comment on a wiki page
Linux: "Changing HRTF requires system re-start" I think I managed to put up to ten *.conf -Files, which setup different sofa-Files or HeSuvi-based wav files in my ~/.config/pipewire/pipewire.conf.d/ folder. To my ears it is possible using pavucontrol to change the applied filters on the fly without restarting the player. Just find you player in the playback tab and change the output. I tested this with mpv and vlc. In vlc you can change the used hrtf-conf in the application itself. Go to Audio/Device...
-
Everyday_use_of_SOFA_HRTF
-
added wip version of Smoothing for Sofa HRTFs
-
added Diffuse field EQ script
-
terrainer posted a comment on ticket #1
My bad, forgot to title the ticket.
-
extra_Evaluation_Grids Isolate Node Found
-
Mesh2HRTF options
-
Mesh2HRTF options
-
virtual_surround_with_headtracking_tutorial
-
Everyday_use_of_SOFA_HRTF
-
tips_to_configure_HeSuVi
-
Home
-
added SOFA CONVOLVER and a few more convertion script improvements
-
added stereo and matrix convolver WAV converters. As well as special headphone calibration SOFA converters
-
updated readme for evaluation grids
-
fixed evaluation grids for multi-radius simulations
-
removing incompatible evaluation grids
-
small tweaks to grids
-
Evaluation grids and many script improvements
-
Earful_tutorial
-
Earful_tutorial
-
Home
-
virtual_surround_with_headtracking_tutorial
-
Earful_tutorial
-
wiki_files_2
-
Everyday_use_of_SOFA_HRTF
-
tips_to_configure_HeSuVi
-
Everyday_use_of_SOFA_HRTF
-
tips_to_configure_HeSuVi
-
tips_to_configure_HeSuVi
-
Everyday_use_of_SOFA_HRTF
-
wiki_files_2
-
tips_to_configure_HeSuVi
-
Home
-
Application_notes_1_General_HRTF_usage_advice
-
Everyday_use_of_SOFA_HRTF
-
Everyday_use_of_SOFA_HRTF
-
Common_HRTF_conversion_and_analysis
-
Common_HRTF_conversion_and_analysis
-
v1.02 for all convert_n_analyse_HRTF scripts
-
wiki_files_2
-
msg v1.01 for all convert_n_analyse_HRTF scripts
-
Common_HRTF_conversion_and_analysis
-
added convert_n_analyse_HRTF scripts v1.0
-
virtual_surround_with_headtracking_tutorial
-
wiki_files_2
-
virtual_surround_with_headtracking_tutorial
-
Advanced_SOFA_to_HeSuVi_conversion
-
Advanced_SOFA_to_HeSuVi_conversion
-
wiki_files_2
-
Earful_tutorial
-
wiki_files_2
-
Home
-
Everyday_use_of_SOFA_HRTF
-
Everyday_use_of_SOFA_HRTF
-
Confusion_of_7-1 and 5-1_channel_order_in_Windows
-
virtual_surround_with_headtracking_tutorial
-
wiki_files_2
-
Home
-
Compiling_hrtf_mesh_grading_on_Windows
-
Everyday_use_of_SOFA_HRTF
-
Home
-
Application_notes_1_General_HRTF_usage_advice
-
virtual_surround_with_headtracking_tutorial
-
Everyday_use_of_SOFA_HRTF
-
Everyday_use_of_SOFA_HRTF
-
Home
-
Advanced_SOFA_to_HeSuVi_conversion
-
wiki_files_2
-
Home
-
Advanced_SOFA_to_HeSuVi_conversion
-
Advanced_SOFA_to_HeSuVi_conversion
-
Advanced_SOFA_to_HeSuVi_conversion
-
wiki_files_2
-
Advanced_SOFA_to_HeSuVi_conversion
-
wiki_files_2
-
Confusion_of_7-1 and 5-1_channel_order_in_Windows
-
Confusion_of_7-1 and 5-1_channel_order_in_Windows
1 >