Blessings this Season

 Happy Thanksgiving.

Cut cardstock 6x12 and score to create the card.

Cut another 6x6 panel, place the die in the center and die cut.

Use assorted Oxide Inks to color, then add to the base.

Ink around the edges.

Stamp then emboss the sentiment in the center.

Wishing you all a wonderful holiday season.

Happy Thanksgiving.

Steph

Scor-Pal Envelope and Card

 Hi everyone, it's time for a new Scor-Pal challenge.  Just create a project with more than one score.

This is a really sweet project to create and is perfect for any holiday.

It can be created in a variety of sizes.

Just remember to use double sided pattern paper for an amazing effect.

For this project, start with paper 10" x 10".

Fold on the diagonal.

Unfold and fold by bringing the edges to the center like a kite.

Using Scor-Pal, score at 7 1/2" across as shown.

Score again at approx. 2 3/4" from the point.
Just be sure it folds over the upper flap.

To create the gussets, start by scoring up from the bottom fold on both sides.

Push in on the center score lines.

Place Scor-Tape along the flaps as shown.

Adhere the larger panel, then fold the point inside and adhere.

Fold the top flap down to its desired position and score.

I scored at 3", but your score line may differ depending on how you created the bottom portion.

Wrap ribbon around the flap and adhere with Scor-Tape.

Die cut the front panel shape and adhere to the top portion of the flap only.

Decorate as desired with leaves and a sentiment.

Cut cardstock 4 1/2" x 8" and score to create the card.

For the interior panel, cut white cardstock 4 1/4" x 7 3/4" and score at 3 7/8".

To create the "stand", find the center point and score a 3/4" mark on either side.

Cut down the 3/4" score line on both sides.

Fold the panel, pushing the "stand" inside.   

Adhere this panel to the card, leaving the "stand" free.

Tear a strip of cardstock and adhere to the "stand"

Fussy cut a flower pot, lightly ink and adhere next.

Die cut flowers and leaves and adhere about the panel.

Finish by adding gem stones to the flowers and around the card.

Consider adding a sentiment to the bottom of the card, if desired.

Decorate the front of the card using left over pattern paper from the envelope.

Add die cut panels, flowers, leaves and gemstones.

Have fun with this design using any sized papers.

The scores will change depending on the size of the paper, but the folds will be the same.

Use 8" x 8" paper to create a gift card holder.

The larger the size, the larger the card you can place inside the envelope.

Have fun!!

Thanks for stopping by.

Steph

Scor-Pal Pop Up Card

Hi everyone, it's time for a new Scor-Pal challenge.  Just create a project with more than one score.  Today I'm sharing a fun pop up card.  This works best when using double sided pattern paper.

Scor-Pal

Scor-Tape

Bazzill Cardstock

Joy Clair Stamp

Spellbinders Dies

Cut cardstock 4 1/4" x 11".

Score at 4 1/2" and 5 1/2'.

Fold at the 5 1/2" scored line.

Fold UP on the 4 1/2" scored line.

Cut pattern paper to fit the panels:

Front panel is 4" x 4 1/4".

Front strip is 7/8" x 4 1/4".

Adhere to front of card.

Wrap ribbon around the front strip and tie off.

Place glue around the strip and adhere to the card.

For the pop up, cut pattern paper 6" x 6".

Score at 3".

Rotate and score at 3".

Score along the diagonal.

Fold along the scored lines.

Line up the pop up panel inside the card.

Add adhesive to one side and close the card.

Flip over and add adhesive to the other side.

Close the card and the pop up is complete.

Cut white panel 2 3/4" x 2 3/4".

Placing in on the diagonal, stamp the sentiment.

Adhere it to the bottom panel.

Add a die cut leaf.

Decorate the front cover with assorted die cuts and sentiment.

Add a white panel to the back of the card - 4" x 5 1/4".

Thanks for stopping by.

Steph

Congratulations - It's a Girl

Hi everyone, it's time for a new Scor-Pal challenge.  Just create a project with more than one score.

Today I'm sharing a fun fold baby girl card.

Use double sided pattern paper so you have a print on both sides.

Cut pattern paper 5 1/4" x 12".

Score at 2", 4", 8", 10".

Fold along the scored lines.

Create triangles in each corner by folding each corner until each meets the scored line.

Cut cardstock 4 1/4" x 5 1/2".

Add Scor-Tape to the center panel of the scored panel.

Adhere to the cardstock panel.

Cut a cardstock panel 3 3/4" x 5" and adhere to the center of the card.

Cut a 3" square panel from cardstock.

Cut a 2 3/4" square from pink cardstock and adhere to the 3" panel.

Center the 3" panel on the diagonal, using Scor-Tape to adhere to the left side.

Stamp and color the baby with Copic Markers.

Fussy cut and add to the card with foam adhesives.

Stamp the phrase on a tag and place behind the baby.

Add gem stones about the panel.

Inside, stamp Congratulations and a set of baby feet.

Thanks for stopping by.

Steph

Halloween Treat Bags

  Hi everyone, it's time for a new Scor-Pal challenge.  Just create a project with more than one score.

I think these cute little treat bags would have everyone enjoying Halloween this year.

Cut cardstock 4 1/4" x 11".

Placing the long edge at the top of the Scor-Pal, score as follows:

Score at 3 1/2", 4 1/4", 5", 8 1/2", 9 1/4" and 10".

Rotate the panel and score at 3/4" to create the bottom.

Fold the panel in mountain and valley format.

Cut up to the score line on the side panels.

Place Scor-Tape along the right side and assemble to create the box.

Fold up the bottom edges and use Scor-Tape to assemble.

For additional support, I added another strip of black cardstock to the bottom.

Decorate as desired using assorted pattern papers and phrases.

To create the top flaps, cut cardstock 2" x 3 1/2" and score the panel in half.

Adhere to the back of the box and fold towards the front.

Finish by punching holes in the top flat.

Run twine through the holes and tie off.

Add stamped images.

Thanks for stopping by.

Steph

Scor-Pal - Friends are Treasures

 Hi everyone, it's time for a new Scor-Pal challenge.  Just create a project with more than one score.

Supplies: Scor-Pal

Scor-Tape

Stamps:  Joy Clair, Hero Arts

Cut cardstock 6" x 12".

With the 12" length at the edge, score at 4" and 8".

Rotate and score the left edge at 3" stopping at the 4" score line.

Rotate and score the right edge at 1 1/2" stopping at the 8" score line.

Cut along the 2 scored lines as shown.

Rotating the panel and placing the straight edge across the channel, score at 1/4" and 11 1/4".

To create the 2 tabs, cut along the 1/4" edges as shown.

Fold along the scored lines.

Score 1/2" from the right edge of the center panel at the tab area.

Fold the left panel towards the center and lightly mark where the tab meets the panel at the 1/2" score line.  Cut along mark so the tab can slip inside.

When the tab is inserted, this creates the bowed effect.

Do the same so the smaller panel's tab can slip inside.

Cut white cardstock 5" x 8".

Stamp and emboss the floral image along the top edge and color with Copic Markers.

Cut the stamped panel to fit the center panel.

Fussy cut around the stamped image and ink the panel with brown ink.

Use a stencil to add a design on the bottom section of the panel.

Adhere the panel to the center of the card then fussy cut around the card.

Cut the outer panels as desired, softening the straight edges.

Ink the card with brown ink.

Punch out assorted sizes of butterflies and adhere to the left panel.

Stamp and emboss a phrase just under the floral panel.

Stamp and emboss a second phrase.  

Ink the edges and adhere to the smaller panel

Finish by adding rhinestones as the butterfly trails and assorted liquid pearls to the flower centers.

Thanks for stopping by.

Steph

Scor Pal July 4th Card

 Hi everyone, it's time for a new Scor-Pal challenge.  Just create a project with more than one score.

Nothing says 4th of July more than firecrackers, right?

Start with navy cardstock 5 1/2" x 11", scoring it to create a 5 1/2" square card.

Cut pattern paper to fit the front and adhere.

Next, cut navy cardstock 3 1/2" x 7", scoring it to create a 3 1/2" square card.

Using Scor-tape, adhere the smaller card to the front panel.

Cut 2 pieces of white cardstock each 3 1/4" square.

Stamp fireworks on the exterior panel and stamp a pinwheel on the interior panel.

The phrase was punched out and added to the front panel.

Decorate both of the interior panels with pattern papers and die cut firecrackers.

Cut a strip of navy cardstock 2 1/4" x 11".

Score at 3/4", 5 1/2" and 10 1/4" and fold on the scored lines.

Cut pattern paper to fit the strip.

Adhere the panel to each side of the card, approximately 1/2" from the edges.

To create the secondary scored lines, gently fold the card, bringing the edge of the panels to the center scored line.  Burnish.

Note: when the card is folded, the panels will lay flat within the card.

Once opened, the card will stay open to display the decorated interior.

Thanks for stopping by.

Steph