iPhone 17 Tools
Tools with part numbers are available for purchase from the Self Service Repair Store. Tools without part numbers can be purchased from electronics supply retailers.
923-13301 6.3-inch back protective cover | 923-10961 6.3-inch display protective cover | 923-12877 6.3-inch repair tray with saturn icon |
923-10726 9-volt battery clips | (923-14190 APAC and EMEIA) (LL923-14190 All other locations) Adhesive cutter | 923-10723 Adhesive de-bond charge plate |
661-42668 Adhesive de-bond fixture | 923-10722 Adhesive de-bond fixture cable | 923-09176 Adhesive removal tool |
661-52832 Adjustable heated display pocket | 923-02995 Adjustable torque driver (10–34 Ncm) | 923-13934 Back glass sanding cover |
923-02657 Battery press | 923-12870 Camera cap | 923-11997 Camera protective cover |
923-0246 Crosshead 44 mm half-moon bit | 923-09177 Crosshead 50 mm bit | – |
Cut-resistant gloves | 661-08916 Display press | ESD mat |
ESD-safe cleaning solution | ESD-safe tweezers | ESD wrist strap with clip or plug |
Ethanol wipes1 | 661-52833 Heated display removal fixture2 | Heat-resistant gloves |
923-12873 Interposer plate | IPA wipes | – |
923-13470 Logic board dock | 923-13467 Logic board dock insert with saturn icon | Melamine sponge |
Nitrile or lint-free gloves | 922-5065 Nylon probe (black stick) | 923-0247 Pentalobe PL1.1 44 mm half-moon bit |
Safety glasses with side shields | Sand3 | Sand container4 |
Sanding block | 923-02066 Super screw 44 mm half-moon bit | 923-09962 Super screw 50 mm bit |
923-0448 Torque driver (blue, 0.65 kgf cm) | 923-00738 Torque driver (gray, 0.55 kgf cm) | 923-00105 Torque driver (green, 0.45 kgf cm) |
923-08131 Torque driver (orange, 0.85 kgf cm) | 923-08085 Torque driver (teal, 0.75 kgf cm) | 923-01290 Trilobe 44 mm half-moon bit |
USB-C charge cable |
923-10727 Crosshead 100 mm half-moon bit |
1 Ethanol wipes must contain at least 90% ethanol and no additives except isopropyl alcohol.
2 Refer to Heated Display Removal Fixture Operating Manual. If you purchased a new heated display removal Fixture, refer to the unboxing instructions.
3 Clean, dry, untreated sand (8–10 cups)
4 Sand container (wide-mouthed, quick pour, nonbreakable plastic container with a flip-top lid)