Carrion King

After last week’s post, you could expect to see a ghoul in a meat skirt. Well, here it is.

Po zeszłotygodniowym wpisie można było spodziewać się ghoula w mięsnej spódnicy. No i jest.

Carrion King WIP

I’m preparing my entry for the Grimdark Challenge under the theme of Carrion Thrones. Using leftover parts from Crypt Horrors, a troll’s back, Milliput, aluminum foil, masking tape, and string, I’ve put together this little guy. I wanted him to look regal - as if he’s bestowing a blessing :D

Szykuję swoje zgłoszenie na Grimdark Challange pod hasłem Carrion Thrones. Z resztek po Crypt Horrorach, pleców trolla, Milliputu, folii aluminiowej, taśmy malarskiej i sznurka poskładałem takiego  oto ludzika. Chciałem, żeby wyglądał monarszo i błogosławiąco :D

Grimdark Sisters of Sigmar Step-by-Step Painting Tutorial

Having returned to the Sisters of Sigmar after a longer break, I decided to write down my painting process so that future returns would be easier. I’m putting this list together mainly for myself, though I also hope it might be useful to someone else :) The model is the Sister Superior #4 Kitbash I've finished lately. Enjoy!

Powróciwszy po dłuższej przerwie do składania i malowania Sióstr Sigmara, postanowiłem skodyfikować proces malowania, żeby kolejne powroty były łatwiejsze. Rozpiskę robię więc przed wszystkim dla siebie, choć mam zarazem nadzieję, że ktoś skorzysta :) Obrazki wydają mi się zrozumiałe same przez się, więc - standardowo już dla tutoriali tego rodzaju - dodatkowe lanie wody zostawiam tylko po angielsku, żeby bloki tekstu nie przytłaczały objętością.

Underpainting

Because I'm aiming for dark and pale colors as usual, I am starting with black-to-dark-grey zenithal - just as in the Witch Hunters painting tutorial:

• I prime the mini black using Citadel Chaos Black Spray.
• When it cures, I spray the mini with Citadel Mechanicus Standard Grey from a 45-degree angle.
• When it's dry, I drybrush the mini from up to down with Vallejo Model Color Blue Pale Grey.
• Finally, I wash it with Two Thin Coats Oblivion Black Wash.

Paints and techniques used

On the picture below there is a list of paints I used. I put the name of the manufacturer and the line the paint comes from in brackets after the name of the paint. For layering, highlighting, edge highlighting, and painting with scratchy lines I put the paints on a wet palette and paint with many thin coats.  For stippling - the main technique I use to get cloth and leather texture - I use a dry palette and an old brush. I use the dry palette for washes and contrast paints as well.

I try to mimic the texture of materials with the way I paint them:

• when painting leather, I stipple the elevated areas with dots and scratchy lines;
• when painting fabrics, I stipple with dots;
• when painting metal, I use metallic paints in places where the light would reflect off.

The process helps to differentiate the surfaces even though the colors used to paint them are often similar.

Grimdark Sisters of Sigmar Step-by-Step Painting Tutorial

Dots-stippling in the first three steps doesn't have to be precise.
At this stage I use an old brush with a little paint (similarly to drybrushing) for it.

For scratchy lines on leather I use the most precise brush I have.
To make transitions on skin smoother, I cover previously highlighted areas of skin with a glaze made of diluted Bugman's Glow.

It's good to switch to a smaller old brush
when stippling with colors as bright as Pale Sand / Off-White mix.

To differentiate the finish on dark leather, I painted the cowl, boots and gloves with diluted Basilicanum Grey (satin finish) and left the body armor matt after covering it with Oblivion Black.

Grimdark Witch Hunters Step-by-Step Painting Tutorial

AF here and some people on Facebook Mordheim Group asked for a Grimdark Witch Hunters painting tutorial. I had some time during the holidays, so I processed the step-by-step photos of Witch Hunter Captain I've painted recently and prepared what's below. Enjoy.

Ludzie na mordheimowej grupie na fejsie pytali o przepis na bladych witch hunterów. Korzystając z wolnego w trakcie przerwy świątecznej, opisałem zdjęcia kapitana łowców czarownic robione w trakcie jego malowania. Efekt poniżej. Jest po angielsku, żeby nie puchło od nadmiaru tekstu. Wierzę, że dacie radę :D

Underpainting

Because I'm aiming for dark and pale colors, I am starting with black-to-dark-grey zenithal:

• I prime the mini black using Citadel Chaos Black Spray.
• When it cures, I spray the mini with Citadel Mechanicus Standard Grey from a 45-degree angle.
• When it's dry, I drybrush the mini from up to down with Vallejo Model Color Blue Pale Grey.
• Finally, I wash it with Two Thin Coats Oblivion Black Wash (In my opinion it's the closest to the old Citadel Nuln Oil).

Paints and techniques used

Here's the list of paints I used. I put the name of the manufacturer and the line the paint comes from in brackets after the name of the paint. For layering, highlighting, edge highlighting, and stippling with scratchy lines I put the paints on a wet palette and paint with many thin coats. If a mix of paints seems too vibrant, I tone it down with Citadel Eshin Grey or Corvus Black. For stippling - the main technique I use to get fabrics and light leather texture - I use a dry palette and an old brush. When I'm using the brightest colors and it needs to be more precise, I switch to a fine brush and put the dots exactly where I want them. The dry palette comes in handy for washes and contrast paints as well.

I try to mimic the texture of materials with the way I paint them:

• when painting leather, I stipple the elevated areas with dots or scratchy lines;
• when painting fabrics, I stipple with dots;
• when painting metal, I use metallic paints in places where the light would reflect off;
• when painting wood, I build up layers of thin lines.

It helps to differentiate the surfaces even though the colors used to paint them are often similar. Additionally, before priming the mini I add some texture (using Mordant Earth and Typhus Corrosion Citadel Technical Paints) to the bottom sections of the coat.

Grimdark Witch Hunter Step-by-Step Painting Tutorial

Stippling here and in the next step doesn't have to be precise.
At this stage I use an old brush with a little paint (similarly to drybrushing) for it.

At this stage I want my stippling dots to go where I want them,
so I switch from an old brush to a pointy one.

Before applying the enamel wash, I wait for the acrylics to cure completely.

I fix pigment with vodka. It doesn't change color of the pigment,
doesn't activate cured paints and let the pigment blend-in well. 

Happy Halloween! Witch Hunter #2

Happy Halloween! What's a more fitting thing to do on the holiday than to explore graveyards, decapitate zombies, and hunt for vampires and witches? Nothing - a witch hunter would say. Here's the next hero for my Mordheim Witch Hunters warband. The model is a kitbash (Cursed City Jelsen Darrock body, flagellant head, zombie head and Bladegheist Revenants sword). It aims to depict one of the classic Mordheim minis: the one referred to as Witch Hunter Captain #1 in a Games Workshop Catalog available on Stuff of Legends.

Trochę z myślą o Halloween, a trochę ze względu na to, że pierwszy model z tej serii (Witch Hunter #1) był dość satysfakcjonujący, poskładałem drugiego łowcę czarownic nawiązującego do klasycznych modeli z  pudełka Witch Hunterów z Mordheim. Jest plan na kolejne ludki bazujące na tym pomyśle. Czas pokaże, kiedy uda się wcielić go w życie.