Tau of War Commissions: The Dark Angels

A classic Dark Angels army with Primaris Space Marines as the foundation. Next few weeks will add a Ravenwing Detachment, and expanded Deathwing.

Kebec III's Amazing Tau Army Unveiled at Adepticon 2013

This Tau army was brought from Quebec, Canada by a team of 4 friends for the Team Tournament, Kebec III. In my biased opinion, it was the coolest army in the entire tournament. The painting was beautiful, the conversions inspired and the mood set just right. The colors on their own created a level of creepiness that was only enhanced by the conversions. Genius.

You can find more of their work at their website: www.arena-montreal.com

Massive Voodoo and More Paulson Games

I've successfully mounted some Paulson Games weapons to a full squad of battlesuits. All that remains on them is a few touch-ups, new drones and grass placed on their bases. The drones I plan on doing almost completely with an airbrush. The only work I intend to do with a traditional brush is the outlining - but I may go the extra mile and do some work beyond that. I really like how the squad is shaping up. At first I felt the Missile Launchers were too large, but after painting them it n longer seems the case.  

That ox-man beast is one of my entries for the Bananalicious contest from Massive Voodoo. He's actually farther along than that right now, but this will give you an idea. For some reason, he reminds me of some sort of Roman gladiator - I think it is the small shield and the exposed chest. I intend to play into that theme some more with the basing and the rest of his paint job. Though that might make for a rather boring base - unless it has severed limbs on it!!!

Airbrush Trick: Burn Your Melta Guns

Special Weapons should be just that; special. This is a trick to make your Meltaguns and Fusion Blaster stand out from the crowd and the rest of their bolter-armed brethren.

Step 1: Mask Your Minis.
Masking off the rest of the model is really essential if you are new to an airbrush, but if you feel confident and you have a steady hand, you can probably pull this off without it.
I decided masking was a good idea. I did so by stuffing the models, mounted to an old paint pot, into a plastic bag. I then nicked a little hole with scissors and bushed the business end of the meltagun through the hole. Then I twisted up the bag and clipped it in place. as you can see here.

Step 2: Prep your colors. I chose my colors, shown below and pulled out some mini paint pots I got from an art store. 

Instead of buying a whole new set of airbrush paints, you can mix matt medium and water to any acrylic and make the appropriate mixture so that the paint flows well through the brush. You need a special consistency - people say that it should be like milk but that never seemed to help me. It should be runny, but opaque - that is it should not run clear.

Don't get me wrong - airbrush paints are awesome. They skip this step - you can squirt them right into your airbrush...but they are not a must-have, as you can mix up your own.  

 Step 4: Load your airbrush and paint.
Here I started by spraying a small amount of vermin brown about half way up the barrel of the meltagun. Then I cleaned that out and sprayed a slightly smaller amount of black onto the end of the meltagun. No real trick to it, just use your eyes.

 Step 5: Remove the model from the bag and viola!

Here are some pics of my final product. I had some extra paint so I grabbed a nearby Battlesuit and gave it the carbon scoring as well. Since it was a large model and the gun really stuck out, there was no need to mask it. Enjoy!

The Joy of Airbrushing

The airbrush is an incredible tool. Can't believe it took me this long to get one. Sitting in my little studio, the paint flowing out of the brush making such beautiful and thin layers of paint. Wonderful blending. What a pleasure...