Underground Explorer: Goggles

With every additional piece (snout, comb, lamp and goggles) added to the helmet the weight increases, and along with it the pressure applied from gravity. At this late stage of construction I know of no way to stiffen the leather itself to better support this weight, and so I decided to build a fiberglass inner shell.


Since the original plastic astronaut helmet is made out of poyethylene--a rather slippery synthetic--I figured I could make the fiberglass directly over it. I took a piece of 5" wide nylon stockinette and it just stretched over the plastic helmet. Then I saturated it with polyester resin and after curing I had a thin strong form that matched the inside of the Explorer's helmet.

I cut the fiberglass shell in half, removed it from the form, and trimmed it down to fit my leather helmet. Above you can see it being contact cemented into the helmet.

Next I attached the recently completed goggles, which can easily be removed. The photos show it with the optional snout removed, so that we can see the face inside.

Underground Explorer: Lamp Comb is Finished

After focusing on the whale tooth for awhile I have returned my attentions to the Underground Explorer's helmet. Yesterday I reworked the comb pattern and remade it to fit properly, then I cut out the leather and hand-stitched it over the acrylic comb form. Today I painted it black, and antiqued it brown to give it that old look. After drying, I bolted and riveted the comb to the leather helm, and attached the lamp to the front.



I have decided on all of the design elements of the helmet, and have just two more to complete: The eyecover/goggles, and the oxygen canister which will hook up to the snout. With this equipment our intrepid explorer will be protected from extremes in pressure and temperature, as well as falling rocks. They will also have a bright light to see what lies before them, and have a fresh supply of oxygen to weather the pockets of foul air. Hopefully this will protect them from all unforseen dangers that might lurk ahead.

Underground: First Comb Attempt

I constructed the helmet comb out of leather and it has some problems, the major one being it is too small once the wet leather shrank.


Although I will have to remake it this picture gives a pretty good idea of how it will look. Of course once the lamp is mounted onto the front it will change again.

Underground Explorer: Building the Lamp Comb

Our underground explorer is certainly going to need a light to see where he's going. Last year at a yard sale I acquired an old physician's head lamp. Nowadays these head lamps have LED's for the light source, but this one has a bulb, and three multi-jointed arms which allow it to crazily point in any direction. Very mad scientist looking. I've decided to mount this lamp on a comb (also called a crest) which is on the top of the helmet.


Today I designed it and cut out the pieces of the comb in ¼" thick plastic, and then glued them all together. Above you can see the individual parts.


And here is the assembled comb bolted to the top of the plastic astronaut's helmet. I will be covering the comb in molded leather, and the lamp will attach to the front vertical surface.