FT-F1 Fogging Tester

FT-F1 Conforms to the Following Standards: DIN 75201, ISO 6452, SAE J1756, QB/T 2728, BS EN 14288, PV 3920, PV 3015, ES-X83231, NES M0161, D45 1727, GM 9305P, TSM 0503G

Fogging Tester is designed to evaluate the evaporation of the high-temperature volatile constituents of the cabin decoration components in automotives and aircrafts, including automotive cabin plastic decoration components, polyurethane, textiles, leather, adhesives, non-woven and thermal forming elastomers and etc., as well as for the fogging test of front high-intensity-discharge (HID) lamp for automotives.

Volatile Components Quantity Tester Principle:
The specimen is heated in the glass beaker and begins to evaporate; the volatile constituents condense on the glass plate or foil that has been cooled by the cooling chamber. After the cooling process, take off the glass plate or the foil. Measure the fogging value or the weight of the condensed constituents on the glass plate or the foil by comparing the data before and after condensation to obtain the volatility of the specimen.