Khorne Daemonkin Bloodcrushers

This weekend we're having another TSB-gathering at Ørn's summer house for a weekend of good food, good drinks and - of course - several games of 40K.

For this, I've put together a Khorne Daemonkin list using the Blood Host detachment with a Slaughtercult, a Charnel Cohort and a couple of Maulerfiends. The Charnel Cohort require you to include a unit of Bloodcrushers, but I didn't own any. No worries! Down to the FLGS in Oslo I went, to buy another box of plastic crack.

The Juggernauts were built and painted over a couple of evenings, with the Bloodletters requiring another two. After that, it was just the small matter of pairing rider and mount - and I'm ready to go!!!

Until next time - where I'll feature the 'little brothers' I promised last time.


J

Bloodthirster of... Magnetized Anger?

Sorry I missed my 'regular' timeslot last Sunday. RealLife (tm) kind of got in the way...

I'd like to be able to say I'll do better, going forward, but the Bloodthirster here marks the end of a nearly two-month 'hobby-spurt'. I seems I've run out of 

The kit went together really well! The biggest... 'issue' was deciding which pair of arms to use. I wanted to be able to use all three Bloodthirster-variants - without having to buy three models.

I quickly figured out that the giant axe for the Bloodthirster of Insensate Rage was the most restrictive weapon pose-wise, and used the arms that fit that one. Magnets in the wrists and the various hands allow me to swap between the variants as the mood takes me...

Lots (and lots) of surface texture allowed for a relatively quick drybrush-up-and-shade-down (repeat until happy) technique, allowing me to finish the model over a couple weeks worth of evenings. An old and mangled Space Marine Bike was repurposed for the base, and painted my favourite shade of blue.

With nothing left that's ready to paint, I'll be building kits from my on-sprue-and-in-bag drawer. I suppose I can do the occasional show-and-tell, once I have a handful of built kits.

Until then...

JørnN

Hunker in the Bunker... November 2015

It's been a while since the last time we've had the pleasure of being invited to Ørn's place for a weekend of gaming, drinking and a big casserole of chilli.

Apart from a couple of test games, this was the first real field test for my new Khorne Daemonkin army.

First game, on Friday, was against Trond's Eldar. I either need some tools specifically designed for killing Wraithknight(s, without dying in the process), or I need to figure out how to take them out with the tolls that I do possess.

On the other table, Inger Helene dropped in on Ørn's Knight Titans.

After breakfast on Saturday, I set up opposite Inger Helene's Black Templars to play Adepticon 2015 Championship primer mission one. After four tense rounds trying to catch up to Inger Helene's early break-away, the cards finally turned in my favour and I was able to secure a two-points victory.

On the other table, Ørn's Knights were fending off Tom-Erik's Eldar army.

A little later, Ørnulv went and got his Imperial Knights. I knew that in a straight Kill-points game, I would have to play the run-away-and-hide game to minimize the inevitable loss. So I insisted we'd roll up a book scenario with objectives, to keep it interesting and give me a fighting chance. I managed to rush his deployed Knights early and keep the pressure up, leaving me in control of two of the three objectives.

Another great weekend in the Eagle's Nest!!!
I'm looking forward to the next one already.

My only regret is not managing to get a game in against the Tyranids no longer played by Ørn...

JørnN

Coming up: "Tham'pa'xtr'o'let"

Herald of Khorne, on foot

Another small update for you this weekend...

I have something bigger and time-consuming than the last few weeks on my painting table at the moment... No cookies forguessing what it is, though. It shouldbe pretty obvious.

Anyway; That means the weekly update has to be somehing I've prepared earlier. As far as I know, this is the Herald model from the Throne/Skullcannon kit. I've put it on a 30mm base, as the stance is far, far to wide to een consider fitting on a 25mm one.

Even so, I've had to chop up one of the mutated arms I still have left over from the handful of Possessed kits I've bought overth years to accomodate the model's pose and try to keep it interesting.

By this time, next weeknd, we should all be back from the gaming event at Ørn's place. Hopefully, someone will have some pictures from that for you. ;)

JørnN

Kytan Daemon Engine (from DreamForge Leviathan Crusader)

A few months ago ForgeWorld presented their new Kytan Daemon Engine, giving those with the Khorne Lord of War kit something worthwhile to use the torso for. A lot of excellent builds of the FW kit, as well as various conversions have since been presented on blogs an forums around the net.

For me, it was an opportunity to dig out one of the two Leviathan Crusader kits I'd acquired from DreamForge's KickStarter campaign last year.

I've left off a lot of the armour plates that's included in the kit to expose more of the mechanical details that would otherwise be obscured. The initial dry-fitting of the armour plates in the model kit quickly showed me that all they added a lot more bulk than I wanted.


I had originally thought I'd use the original torso, but find a beast or daemon head to replace the Crusader's original helmet. In the end, though, I ended up sawing the torso front off again (It was glued on solid!.) to fit the Ogre Kingdoms Longhorn head instead. It took ha handful of pins, some balled-up aluminium foil and a sizeable lump of Green Stuff, but I did get it into a position where the horns didn't end up getting in the way of the shoulder armour plates.

With the basic build done, I dollied up a Knight base, pinned the feet to it and glued all the moveable joints and pistons to lock in a suitable pose. The arms remain moveable and the weapons can still be taken off and replaced - just in case someone at ForgeWorld comes up with other weapon options for the Kytan.

After the pose was finalized, it was time to dive into the bitz-boxes and fit an assortment of symbols and sigils onto the model. I even replaced the gatling cannon barrel with a spare Juggernaut head. I could not find anything large enough to cover the shoulder plates, though, so I ended up taking my very first stab at detailing with plasticard. It took me a couple of nights of cutting strips, fitting and gluing them onto curved surfaces before scraping and sanding them to blend them together.

The paint job doesn't differ too much from what I've done for my Word Bearers. Black primer, heavy drybrush of Warplock Bronze followed by a lighter drybrush of Leadbelcher. The red is the old Red Ink from Citadel Colour, but I'v also treated the metal parts to several other Vallejo inks and washes too.

Next? I have a couple of projects under way already, to enable me to use a few of the formations in the Khorne Daemonkin codex. One's pretty close to completion, so make sure to look both ways before crossing the road...

JørnN

Khorne Daemonkin Possessed (from AoS Blood Warriors)

It's that time of the week again, and quite the special occasion today too...

First off, the five 'Khornate Possessed' pictured above marks the completion of the Khorne Daemonkin army I plan on taking to Ørn's get-together in a complete of weeks. I should probably see about getting a test game or two in before then - provided that Real World demands will allow it.

The other milestone reached today, is that this is the five hundredth article published on the blog. During the seven and a half years (almost) that we've been doing this, you have been able to follow several army projects from their inception to their current state. The 'flow' of articles have always been a little unpredictable... Controlled more by the various team members' hobby progress and inclinations to take pictures and do write-ups than any overarching plan.

It is my hope that for the next five hundred articles, more of us will want to 'step up' onto the soap box, figuratively speaking, and show off their progress as well as share their thoughts.

I'll go pour myself a glass now, and go back to some of the oldest articles to remines... reminec... revisit a few favourite moments.

JørnN

Bloodletters, second batch

Hope everyone's had a good Halloween. Here's that second batch of Bloodletters.

Two squads of eight, and a few spares not pictured here. That should be enough to keep me in shock troops for a while.

Just one one more small squad left, to complete the army I plan to use in a few weeks.

Then perhaps I'll still have time left over to complete a 'stretch goal' or two...

JørnN

Herald of Khorne on Juggernaut

Just a quick update again, this week. I'm still working on the next batch of Bloodletters, so all I have for you today is this Herald on Juggernaut. I suppose it's really just a Bloodcrusher, but until I get around to doing a squad of those it'll do well enough accompanying a unit of Flesh Hounds.

I've spread a liberal amount of heads and helmets from my bitz boxes onto the base, as befitting a favoured soldier of the Blood God.

The Juggernaut has been painted pretty much per the usual colour scheme for my Word Bearers' armour, but I've experimented with Black and Sepia inks from Vallejo in addition to the the usual Red Ink from Citadel Colours. The oxidation/verdigris effect on the brassy pieces is a watery mix of blue and green paints followed by a light dry-brush of 'Brassy Brass' again.

Bloodletters, first batch

Nothing too spectacular this week, but there is some progress on the Khorne Daemonkin project.

This week I have managed to finish a squad of Bloodletters. That leaves just one more squad of the Blood God's foot soldiers, as well as some Possessed.

Not quite sure what to do for those, though...

JørnN

Chaos Lord / Herald of Khorne on Juggernaut of Khorne

There's limited use in a pack of dogs if the pack doesn't have a suitable leader. Luckily, the 'perfect' character for the job is right there in the HQ section of the Chaos Daemons codex.

Enter the Herald of Khorne, astride a Juggernaut to be able to keep up with his charges. Alternatively, this guy can just as easilly represent a Chaos Lord on a Daemonic Mount.

While Beasts and Cavalry do interact a little differently with Difficult Terrain, they behave similarly enough that potential issues are easily avoided with a little forethought.

The model above is kitbashed from a number of different kits. The Juggernaut itself, the rider's legs and right arms (See below!) are from the Skullcrushers. The rider's head, torso, backpack and shoulder guards comes from CSMs Possessed. The final bit is the left arm, which comes from the Blood Throne.

While the initial idea is to run the model with an Axe of Khorne, I have made a little effort in magnetizing the right arm to allow for multiple weapon options...

Flesh Hounds of Khorne - Jørn's Dogs of War

"Cry 'Havoc!', and let slip the dogs of war".

What to do when $10 / £6 per model seems a little excessive for a unit of Flesh Hounds of Khorne? GW's own Dire Wolves costs just over a quarter of the above price. Even if you do buy the bases from GW too, you're still saving more than fifty per cent.

I've had ten of these assembled and primed for quite a while now, but was waiting on ten more that Tom-Erik brough around when we managed to get a game in a while ago.

With all twenty 'ready to go', I overheard somewhere that they went on 50mm bases now... A quick check on GW's web store confirmed it. Back to square one!

Of course, GW tells us we can use whatever bases we feel are appropriate... I could no longer get past how small the 40mm bases suddenly looked.

After a quick and fruitless round of GW's web store and a number of bits-stores later, I found a seller on eBay who had exactly what I wanted - at far less than the aforementioned web stores wanted.

JørnN