Boat stands

My recent running of my Mercury 7.5 HP in a somewhat wobbly trash barrel has prompted me to think about getting/making a motor stand. So, I worked up a...

I have a Watkinis 23 swing keel sitting on a tandem axle trailer. I just bought the boat a week ago. The trailer is in need of bunk replacement and support...

I needed a couple of outboard motor stands for the old and new outboards. Couldnt find any used and wasnt going to pay $80 or more for some flimsy and bulky...

For a number of years, I used a piece of 2x4 screwed to the side of the garden shed as a mount for my 3.5hp Tohatsu outboard. It would perch happily thereon while I dangled its nether regions in a cooling tub of fresh water, sputtering and burbling away as the salt got rinsed from its innards. This year, I decided something more sophisticated was in order for my faithful motor. I wanted a

Ricks outboard motor stands

I have decided to put together some detailed information on my o/b motor stand. My hope is that my documentation will help all those DIY newbie?s find some...

My recent running of my Mercury 7.5 HP in a somewhat wobbly trash barrel has prompted me to think about getting/making a motor stand. So, I worked up a...

A serial stand-up-paddleboard maker got his start doing strip-built construction in an unlikely place—soap-box derby cars—and three decades later shifted his focus to artistic expression in wood. #smallboats #standuppaddleboard #paddleboard #DIY #boatbuilding #woodworing

8. DIY Boat Stand Plan

Thumbs Up I hope everyone had a blast at yesterday's slabfest, unfortunately I had to punch the clock. I'll be reading up and trying to help out with

Outboard stands Page: 1 - iboats Boating Forums | 233441

Missing a bimini top? Restore Pontoon is showcasing their Sunbrella Pontoon Boat Bimini Tops on their website and you can be sure that quality goes into every stitch.

plans and dimensions for building an outboard engine maintenance stand

He started with a wedge shape for the hull: a plumb stem to part waves and a flat run for planing. As he explored the shape with a model of stiff paper, the sides came together in a way that suggested a raised foredeck and stem with a reverse rake. The foredeck required a break in the sheer to sweep down to the stern, which, as Riley put it, “revealed a slightly strange shape, like little ears, between the side and foredeck standing out as rather odd and unconventional. I decided it was…