FAQ
Can I Get a Sample?
Yes, You can order samples directly off our retail website: FauxStoneSheets.com
How much does URESTONE weigh?
Our faux stone, brick and wood panels vary in weight depending on the panel, check product specifications for accurate information. But in general, are close to 1 lb./sq. foot.
Are URESTONE panels easy to install?
Yes, our panels are very easy to install. If you are not handy, any carpenter in the phone book can install our panels.
How do you cut URESTONE panels?
Cutting the panels is easy! You can use any wood cutting tool.
Can I use URESTONE panels around my fireplace or stove?
Although our panels are incredibly realistic, keep in mind that they are not a stone product, we manufacture them utilizing high-density polyurethane. With that in mind, you can use all of our polyurethane panels around a fireplace opening, insert, or stove, provided you follow the fireplace insert/stove manufacturer’s specifications for required clearances.
When using our panels around an open hearth where there will be a “live flame” (e.g., wood, coal, etc.), we recommend that you use stone or any non-flammable border (minimum 6″) before starting our panels. And then use Class-A fire-rated panels for the area immediately surrounding the opening. Please note that anytime our panels are used in conjunction with a chance of a live flame or embers coming in contact with the said panel, we recommend using a Class-A fire rating. Remember that a Class-A fire rating makes the panels more fire and heat retardant but does not make them fire-proof.
Other than this, you can use our standard panels with the same clearances observed as the fireplace/stove manufacturer recommends for any standard paneling material or sheetrock. You must adhere to each building’s fire codes concerning clearances that are applicable in your area.
How real do URESTONE panels look?
URESTONE faux stone panels and our other textures replicate every detail of the natural material. Each panel is hand-painted with a multi-step process to ensure that every panel is stunningly realistic.
Can URESTONE panels be used as flooring?
For the most part, we do not recommend using these panels as flooring. They are to be used on walls and ceilings only.
Can I use URESTONE panels to cover my chimney?
Yes, you can put our panels on any flat surface.
Where can URESTONE products be used?
Anywhere you want the look of brick, stone, or wood. URESTONE panels are perfect for inside or outside in any residential or commercial application.
Is there any maintenance needed?
After the sheets are installed, no maintenance is required!
What sizes do URESTONE panels come in?
Please click on the product line you are interested in to learn more, there is some variation in the texture types due to pattern differences.
The sizes are broken down by series, on average our URESTONE Series is close to 48″ high x 96″ in width, the Wainscot Series is close to 42″ high x 96″ in width, and the URESTONE Lite 2’x4′ series is close to the stated 2 feet x 4 feet.
Can URESTONE panels be used outside?
Yes. URESTONE panels are specially formulated to resist moisture, sun fading, insects, and pests.
Are URESTONE panels UV proof?
Yes, URESTONE panels are hand-painted using high-quality exterior paints and are UV proof.
Can I attach URESTONE panels to concrete?
Yes, URESTONE panels can be glued to cement with construction adhesive. You can also use “Tap Con” masonry screws in each corner of the panel. The caulking we provide will hide the screw heads. This is a very common application.
What are URESTONE panels made of?
That depends on which series is in question.
The URESTONE Large Designer Series and URESTONE Wainscot Series are made from a combination of urethane hard-coat and high-density foam.
The URESTONE Lite 2’x4′ Series is produced solely from high-density foam.
What is the difference between URESTONE and URESTONE Lite?
What do URESTONE panels feel like?
URESTONE panels are molded from real brick, stone, wood, etc—and they feel just like the real thing.
Can I use your stone veneer panels as skirting around my house?
Yes, our 4′ x 8′ foot URESTONE Designer Panels and URETONE Wainscot Series install fast and are perfect for the elements and exterior applications and can be installed as quickly as one day.
How do URESTONE panels ship?
Our URESTONE Large Designer Series and URESTONE Wainscot Series ship directly to you (or your job site) via LTL freight.
The URESTONE Lite 2’x4′ Series is smaller and can be shipped out by FedEx.
Shipping is an additional cost.
Are URESTONE panels waterproof?
YES, this is the same system that we pioneered when making our outdoor water features, which have held up outdoors for well over 10 years.
How do I clean URESTONE panels?
Cleaning URESTONE panels is easy.
For exterior applications, simply rinse them down with a garden hose.
For interior applications, you can wash them with soap and water or a mild detergent.
Can I use URESTONE faux panels in my shower?
Yes, URESTONE panels are completely waterproof and are extremely durable.
When cleaning, please use only a mild detergent and make sure not to use any harsh or bleach-based cleaners. The panels can be sealed in with a polyurethane sealer for easier cleaning if needed.
Do you offer a warranty?
Can URESTONE panels flex around a curved wall?
Yes, you can install URESTONE panels on a curved wall.
Most panels will only require a little extra glue and screws. Depending on the radius and thickness of the panels, it might also be necessary to heat them up or even score the back of the panel to achieve installation.