Airmar

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be...

117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze...

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut...

164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use...

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut...

Replacement bracket for P23 and P32 housing styles only.

Transom speed repair kit for S61 (can also use complete 33-105) and S63 transom paddlewheel speed sensors with cable Contains: 1 paddlewheel and shaft 2 yokes with shear pins (for S63,ST63 use only)

Thru-hull spares kit. Contains all wearing parts in the paddlewheel assembly Fits: Raymarine ST600, ST700 Contains: 1 paddlewheel and shaft 6 o-rings 1 valve 1 retaining ring