To facilitate access to Sharp Pocket Computer schematics, I’ve initiated a project to gather and host a collection of these schematics on my website. This resource is intended to assist Sharp PC 1500/1600 enthusiasts in updating, modifying, and particularly, repairing their hardware.
The Sharp PC 1500/1600 series is now considered obsolete, and their schematics are already readily available on the internet, falling within the public domain. If you possess copyrights to any of this material and wish to have it removed from my website, kindly inform me.
Here’s a list of schematics currently available:
- Sharp PC-1500 Pocket Computer Schematic
- Sharp CE-150 Color Graphic Printer Schematic
- Sharp CE-151 4kB Memory Module Schematic
- Sharp CE-153 Software Board Schematic
- Sharp CE-155 8kB Memory Module Schematic
- Sharp CE-158 Serial and Parallel Interface Schematic
- Sharp CE-159 Program Module Schematic
- Sharp CE-161 16kB RAM Memory Module Schematic
Hi ! I’ve got a PC-1600 in excellent condition. I’d like to make a small controll with it via the serial ports. Because of this I need the exact type of its serial connectors to be connected (the male connectors to the outer world): the small rounded one and the other 15-pin connector. Please, help me. There aren’t in the service guide. Thank you for your help. Regards, Joe Kiss.
Hello!
Any chance to get a dump of the rom used in a ce150?
That would allow me to build a tape interface for my pc1500….
Hi, you’ve got mail… 😉 — Kai
Good morning, I have a question about an anomaly on a sharp 1500, in PRG mode the basic program is inserted but is not executed. Could it be a RAM problem? Thank you.
Daniele