Scribd
Upload
632 views3 pages

Ultrasonic Thickness Gauge Testing Report: Authorized Signatory: Witnessed By: Performed / Evaluated by

The ultrasonic thickness gauge testing report details non-destructive testing of pipe material for a client project. It lists the ultrasonic unit used, calibration blocks, couplant, probe size and frequency, and test method of pulse echo. Material specifications, surface condition, and drawings are referenced. Original thickness and gauge readings within minimum and maximum tolerances are reported for test items. The report is signed by the NDT technician, inspector, and laboratory manager.

Uploaded by

Aileen May Caminero Sumampao
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
632 views3 pages

Ultrasonic Thickness Gauge Testing Report: Authorized Signatory: Witnessed By: Performed / Evaluated by

The ultrasonic thickness gauge testing report details non-destructive testing of pipe material for a client project. It lists the ultrasonic unit used, calibration blocks, couplant, probe size and frequency, and test method of pulse echo. Material specifications, surface condition, and drawings are referenced. Original thickness and gauge readings within minimum and maximum tolerances are reported for test items. The report is signed by the NDT technician, inspector, and laboratory manager.

Uploaded by

Aileen May Caminero Sumampao
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

ULTRASONIC THICKNESS GAUGE TESTING REPORT

Client Project Name Date of Inspection Acceptance Criteria Ultrasonic Unit Serial No. Couplant Used Probe Size Frequency Nature of Test Method of Testing Calibration Block Client Verification KRAUTKRAMER USM 35X DAC LEMO 7900 a Oil 6mm 5 Mhz Thickness Gauging Pulse Echo "A" Scan Direct IIW V1 Block / V2 Block / Step Block Sta Clara International Corporation Address Location / Site Sample Card No. Laboratory No. NDT Procedure No. Technique Sensitivity Setting Heat Treatment Material Specification Surface Condition Tested Item Drwng. Ref. No. XWELL-UTG-2009-01 Straight Beam Technique 80% Full Screen Height N/A Carbon Steel Ground Smooth Pipe As per Client Specified Wall Thickness Reduction Min mm % mm Max % Remarks 2nd floor highway 54 Plaza Mandaluyong City

Item Identification No.

Original Thickness mm

Gauge Reading Min (mm) Max (mm)

12 26

7 4

11 9

5 22

41.67 84.62

1 17

8.33 65.38

Performed / Evaluated By:

Witnessed By:

Authorized Signatory:

NDT Technician / QC Engr. NDT Inspector


XWELL Form Rev. 0

SCIC
Page 1 of 2

Laboratory Manager/NDT Level II For and On-Behalf of X'Well Testing Services Inc.

ULTRASONIC THICKNESS GAUGE TESTING REPORT


Sketch Detail / Part / Joint Location

Performed / Evaluated By:

Witnessed By:

Authorized Signatory:

Edison A. Walit
Qc Engr. / NDT Level II
XWELL Form Rev. 0

J. Salomon / A. Pajarillo
ATI / SCIC
Page 2 of 2

Thelma G. Mendoza
Laboratory Manager/NDT Level II For and On-Behalf of X'Well Testing Services Inc.

ONIC THICKNESS GAUGE TESTING REPORT


Sketch Detail / Part / Joint Location

Authorized Signatory:

Thelma G. Mendoza
Laboratory Manager/NDT Level II For and On-Behalf of X'Well Testing Services Inc.
XWELL Form Rev. 0 Page 2 of 2

You might also like