Scribd
Upload
932 views1 page

Macgrid Eg 30

The document provides technical data on MACGRID EG polypropylene bi-axial geogrids, including their mechanical and physical-chemical properties. It details the geogrid models 15S, 20S, 30S and 40S and specifies their minimum average tensile strengths, typical strains and junction strength efficiencies. The geogrids are made of stabilized UV polypropylene and are used for soil stabilization and reinforcement applications.

Uploaded by

neoluist
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
932 views1 page

Macgrid Eg 30

The document provides technical data on MACGRID EG polypropylene bi-axial geogrids, including their mechanical and physical-chemical properties. It details the geogrid models 15S, 20S, 30S and 40S and specifies their minimum average tensile strengths, typical strains and junction strength efficiencies. The geogrids are made of stabilized UV polypropylene and are used for soil stabilization and reinforcement applications.

Uploaded by

neoluist
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TECHNICAL DATA SHEET

Rev. 07, Date 10.12.2010

MACGRID EG
POLYPROPYLENE BI-AXIAL GEOGRIDS
MACGRID EG are high modulus polypropylene geogrids, produced by an extrusion process characterized by a tensile resistance both in the longitudinal and in the transverse direction.
They are inert to all chemical existing in natural soils 4<ph<9.
MACGRID EG are mainly used for soil stabilization and for some kinds of soil reinforcements applications.

MACGRID EG

15S

20S

30S

40S

Mechanical Properties
Minimum Average Tensile Strength
Longitudinal direction

kN/m

15.0

20.0

30.0

40.0

Tensile strength at 2% strain


Longitudinal

kN/m

5.0

7.0

10.5

14.0

Tensile strength at 5% strain


Longitudinal

kN/m

7.0

14.0

21.0

28.0

13

13

13

13

kN/m

15.0

20.0

30.0

40.0

Tensile strength at 2% strain - Transverse

kN/m

5.0

7.0

10.5

14.0

Tensile strength at 5% strain - Transverse

kN/m

7.0

14.0

21.0

28.0

10

10

10

10

95

95

95

95

Typical strain at M.A.T.S. - Longitudinal

EN ISO 10319
ASTM D 6637

Minimum Average Tensile Strength


Transverse direction

Typical strain at M.A.T.S. - Transverse


Typical junction strength efficiency
Typical value

GRI GG2/GG1

Physical - Chemical Properties


Grid Structure

Extruded bi-axial

Polymer

100% stabilized UV polypropylene

Carbon Black content

>2

Color
Mesh Opening size nominal value

Black
(1)

mm

38x38

38x38

38x38

Roll Length

50

Roll Width

3.95

(1)

38x38

The mesh size refers to length x transverse directions.


Aperture tolerance + 3mm.
Larger openings as 65x65 are available on request.

For the optimization and improvement process of the technical characteristics of the products, the producer reserves the right to modify standard and characteristics of the product without any warning. The
information contained herein is to the best of our knowledge accurate, but since the circumstances and
conditions in which it may be used are beyond our control, we do not accept any liability for any loss or
damage, however arising, which results directly or indirectly from the use of such information nor do we
offer any warranty or immunity against patent infringement.

Officine Maccaferri S.p.A.


Via Kennedy, 10 - 40069 Zola Predosa (BO) - Italy
Tel. (+39) 051-6436000 - Fax (+39) 051-6436201
E-mail: comes@maccaferri.com - Web site: www.officinemaccaferri.com

Bureau Veritas Certified Quality System Company


with SINCERT's and UKAS' s accreditation.

You might also like