Taian Modern Plastic Co.
, LTD
No.32 Jinniushan Road, Taian
Shandong, P.R. China 271000
TEL/FAX: +86 538 8560690
TMP Uniaxial Geogrid
Uniaxial Geogrid GG60PE
Uniaxial Geogrid GG80PE
Uniaxial Geogrid GG120PE
Uniaxial Geogrid GG160PE
Uniaxial Geogrid GG180PE
Uniaxial Geogrid GG200PE
UXGG_SPECS_Feb.17
Taian Modern Plastic Co., LTD
No.32 Jinniushan Road, Taian
Shandong, P.R. China 271000
TEL/FAX: +86 538 8560690
TMP GEOSYNTHETICS - Uniaxial Geogrid GG60PE
Introduction
TMP Uniaxial Geogrid is especially designed for soil reinforcement. It is manufactured with high quality High Density
Polyethylene resins, from the process of extruding and longitudinal stretching. TMP Uniaxial Geogrid has high tensile
strength, excellent interlock capacity and low creep deformation
Applications
■ Retaining walls reinforcement ■ Steep slopes reinforcement
■ Embankments stabilization ■ Landfill side slopes reinforcement
Specifications
Index Properties Test Method Units MD Values
■ Polymer - - HDPE
■ Minimum Carbon Black ASTM D 4218 % 2
■ Tensile Strength @ 2% Strain ASTM D 6637 kN/m (lb/ft) 16 (1,090)
■ Tensile Strength @ 5% Strain ASTM D 6637 kN/m (lb/ft) 31 (2,130)
■ Ultimate Tensile Strength ASTM D 6637 kN/m (lb/ft) 60 (4,110)
■ Strain @ Ultimate Strength ASTM D 6637 % 11.5
■ Junction Efficiency GRI GG2-87 % 93
■ Flexural Rigidity ASTM D 1388 mg-cm 530,000
Durability
■ UV Resistance ASTM D 4355 % 98
■ Oxidation Resistance EN ISO 13438 % 100
■ Brittleness WashDOT T926 - Pass
Reduction Factor
■ Reduction Factor of
Installation Damage (RFid) ASTM D5818 - 1.00
■ Reduction Factor of Creep of
114-year Design Life (RFcr) ASTM D5262 - 2.23
Dimensions
■ Roll Width - m (ft) 1(3.28) or 2(6.56)
■ Roll Length - m (ft) 100 (328)
TMP Laboratory is improving continuously with the purpose of assuring reliable quality. TMP Geosynthetics reserves the right to change the product specifications
at any time.
UXGG_SPECS_Feb.17
Taian Modern Plastic Co., LTD
No.32 Jinniushan Road, Taian
Shandong, P.R. China 271000
TEL/FAX: +86 538 8560690
TMP GEOSYNTHETICS - Uniaxial Geogrid GG80PE
Introduction
TMP Uniaxial Geogrid is especially designed for soil reinforcement. It is manufactured with high quality High Density
Polyethylene resins, from the process of extruding and longitudinal stretching. TMP Uniaxial Geogrid has high tensile
strength, excellent interlock capacity and low creep deformation
Applications
■ Retaining walls reinforcement ■ Steep slopes reinforcement
■ Embankments stabilization ■ Landfill side slopes reinforcement
Specifications
Index Properties Test Method Units MD Values
■ Polymer - - HDPE
■ Minimum Carbon Black ASTM D 4218 % 2
■ Tensile Strength @ 2% Strain ASTM D 6637 kN/m (lb/ft) 23 (1,570)
■ Tensile Strength @ 5% Strain ASTM D 6637 kN/m (lb/ft) 44 (3,010)
■ Ultimate Tensile Strength ASTM D 6637 kN/m (lb/ft) 80 (5,480)
■ Strain @ Ultimate Strength ASTM D 6637 % 11.5
■ Junction Efficiency GRI GG2-87 % 93
■ Flexural Rigidity ASTM D 1388 mg-cm 1,100,000
Durability
■ UV Resistance ASTM D 4355 % 98
■ Oxidation Resistance EN ISO 13438 % 100
■ Brittleness WashDOT T926 - Pass
Reduction Factor
■ Reduction Factor of
Installation Damage (RFid) ASTM D5818 - 1.00
■ Reduction Factor for Creep of
114-year Design Life (RFcr) ASTM D5262 - 2.23
Dimensions
■ Roll Width - m (ft) 1(3.28) or 2(6.56)
■ Roll Length - m (ft) 50 (164)
TMP Laboratory is improving continuously with the purpose of assuring reliable quality. TMP Geosynthetics reserves the right to change the product specifications
at any time.
UXGG_SPECS_Feb.17
Taian Modern Plastic Co., LTD
No.32 Jinniushan Road, Taian
Shandong, P.R. China 271000
TEL/FAX: +86 538 8560690
TMP GEOSYNTHETICS - Uniaxial Geogrid GG120PE
Introduction
TMP Uniaxial Geogrid is especially designed for soil reinforcement. It is manufactured with high quality High Density
Polyethylene resins, from the process of extruding and longitudinal stretching. TMP Uniaxial Geogrid has high tensile
strength, excellent interlock capacity and low creep deformation
Applications
■ Retaining walls reinforcement ■ Steep slopes reinforcement
■ Embankments stabilization ■ Landfill side slopes reinforcement
Specifications
Index Properties Test Method Units MD Values
■ Polymer - - HDPE
■ Minimum Carbon Black ASTM D 4218 % 2
■ Tensile Strength @ 2% Strain ASTM D 6637 kN/m (lb/ft) 35 (2,400)
■ Tensile Strength @ 5% Strain ASTM D 6637 kN/m (lb/ft) 65 (4,450)
■ Ultimate Tensile Strength ASTM D 6637 kN/m (lb/ft) 120 (8,220)
■ Strain @ Ultimate Strength ASTM D 6637 % 11.5
■ Junction Efficiency GRI GG2-87 % 93
■ Flexural Rigidity ASTM D 1388 mg-cm 6,000,000
Durability
■ UV Resistance ASTM D 4355 % 98
■ Oxidation Resistance EN ISO 13438 % 100
■ Brittleness WashDOT T926 - Pass
Reduction Factor
■ Reduction Factor of
Installation Damage (RFid) ASTM D5818 - 1.00
■ Reduction Factor for Creep of
114-year Design Life (RFcr) ASTM D5262 - 2.23
Dimensions
■ Roll Width - m (ft) 1(3.28) or 2(6.56)
■ Roll Length - m (ft) 50 (164)
TMP Laboratory is improving continuously with the purpose of assuring reliable quality. TMP Geosynthetics reserves the right to change the product specifications
at any time.
UXGG_SPECS_Feb.17
Taian Modern Plastic Co., LTD
No.32 Jinniushan Road, Taian
Shandong, P.R. China 271000
TEL/FAX: +86 538 8560690
TMP GEOSYNTHETICS - Uniaxial Geogrid GG160PE
Introduction
TMP Uniaxial Geogrid is especially designed for soil reinforcement. It is manufactured with high quality High Density
Polyethylene resins, from the process of extruding and longitudinal stretching. TMP Uniaxial Geogrid has high tensile
strength, excellent interlock capacity and low creep deformation
Applications
■ Retaining walls reinforcement ■ Steep slopes reinforcement
■ Embankments stabilization ■ Landfill side slopes reinforcement
Specifications
Index Properties Test Method Units MD Values
■ Polymer - - HDPE
■ Minimum Carbon Black ASTM D 4218 % 2
■ Tensile Strength @ 2% Strain ASTM D 6637 kN/m (lb/ft) 47 (3,220)
■ Tensile Strength @ 5% Strain ASTM D 6637 kN/m (lb/ft) 93 (6,370)
■ Ultimate Tensile Strength ASTM D 6637 kN/m (lb/ft) 160 (10,970)
■ Strain @ Ultimate Strength ASTM D 6637 % 11.5
■ Junction Efficiency GRI GG2-87 % 93
■ Flexural Rigidity ASTM D 1388 mg-cm 8,500,000
Durability
■ UV Resistance ASTM D 4355 % 98
■ Oxidation Resistance EN ISO 13438 % 100
■ Brittleness WashDOT T926 - Pass
Reduction Factor
■ Reduction Factor of
Installation Damage (RFid) ASTM D5818 - 1.00
■ Reduction Factor for Creep of
114-year Design Life (RFcr) ASTM D5262 - 2.23
Dimensions
■ Roll Width - m (ft) 1(3.28) or 2(6.56)
■ Roll Length - m (ft) 50 (164)
TMP Laboratory is improving continuously with the purpose of assuring reliable quality. TMP Geosynthetics reserves the right to change the product specifications
at any time.
UXGG_SPECS_Feb.17
Taian Modern Plastic Co., LTD
No.32 Jinniushan Road, Taian
Shandong, P.R. China 271000
TEL/FAX: +86 538 8560690
TMP GEOSYNTHETICS - Uniaxial Geogrid GG180PE
Introduction
TMP Uniaxial Geogrid is especially designed for soil reinforcement. It is manufactured with high quality High Density
Polyethylene resins, from the process of extruding and longitudinal stretching. TMP Uniaxial Geogrid has high tensile
strength, excellent interlock capacity and low creep deformation
Applications
■ Retaining walls reinforcement ■ Steep slopes reinforcement
■ Embankments stabilization ■ Landfill side slopes reinforcement
Specifications
Index Properties Test Method Units MD Values
■ Polymer - - HDPE
■ Minimum Carbon Black ASTM D 4218 % 2
■ Tensile Strength @ 2% Strain ASTM D 6637 kN/m (lb/ft) 52 (3,560)
■ Tensile Strength @ 5% Strain ASTM D 6637 kN/m (lb/ft) 104 (7,130)
■ Ultimate Tensile Strength ASTM D 6637 kN/m (lb/ft) 180 (12,340)
■ Strain @ Ultimate Strength ASTM D 6637 % 11.5
■ Junction Efficiency GRI GG2-87 % 90
■ Flexural Rigidity ASTM D 1388 mg-cm 9,400,000
Durability
■ UV Resistance ASTM D 4355 % 98
■ Oxidation Resistance EN ISO 13438 % 100
■ Brittleness WashDOT T926 - Pass
Reduction Factor
■ Reduction Factor of
Installation Damage (RFid) ASTM D5818 - 1.00
■ Reduction Factor for Creep of
114-year Design Life (RFcr) ASTM D5262 - 2.23
Dimensions
■ Roll Width - m (ft) 1(3.28) or 2(6.56)
■ Roll Length - m (ft) 50 (164)
TMP Laboratory is improving continuously with the purpose of assuring reliable quality. TMP Geosynthetics reserves the right to change the product specifications
at any time.
UXGG_SPECS_Feb.17
Taian Modern Plastic Co., LTD
No.32 Jinniushan Road, Taian
Shandong, P.R. China 271000
TEL/FAX: +86 538 8560690
TMP GEOSYNTHETICS - Uniaxial Geogrid GG200PE
Introduction
TMP Uniaxial Geogrid is especially designed for soil reinforcement. It is manufactured with high quality High Density
Polyethylene resins, from the process of extruding and longitudinal stretching. TMP Uniaxial Geogrid has high tensile
strength, excellent interlock capacity and low creep deformation
Applications
■ Retaining walls reinforcement ■ Steep slopes reinforcement
■ Embankments stabilization ■ Landfill side slopes reinforcement
Specifications
Index Properties Test Method Units MD Values
■ Polymer - - HDPE
■ Minimum Carbon Black ASTM D 4218 % 2
■ Tensile Strength @ 2% Strain ASTM D 6637 kN/m (lb/ft) 58 (3,970)
■ Tensile Strength @ 5% Strain ASTM D 6637 kN/m (lb/ft) 116 (7,950)
■ Ultimate Tensile Strength ASTM D 6637 kN/m (lb/ft) 200 (13,700)
■ Strain @ Ultimate Strength ASTM D 6637 % 11.5
■ Junction Efficiency GRI GG2-87 % 90
■ Flexural Rigidity ASTM D 1388 mg-cm 9,600,000
Durability
■ UV Resistance ASTM D 4355 % 98
■ Oxidation Resistance EN ISO 13438 % 100
■ Brittleness WashDOT T926 - Pass
Reduction Factor
■ Reduction Factor of
Installation Damage (RFid) ASTM D5818 - 1.00
■ Reduction Factor for Creep of
114-year Design Life (RFcr) ASTM D5262 - 2.23
Dimensions
■ Roll Width - m (ft) 1(3.28) or 2(6.56)
■ Roll Length - m (ft) 50 (164)
TMP Laboratory is improving continuously with the purpose of assuring reliable quality. TMP Geosynthetics reserves the right to change the product specifications
at any time.
UXGG_SPECS_Feb.17
