JOB CARD MPD-TASK:
CEB - A318/A319/A320/A321 AMM TASK : 31-60-00-740-007-A
31-60-00 PB 501
TITLE:
A/C Reg.:
31-60-00-740-007-A - GROUND
RP-C4108
SCANNING Test of the DMC
CARD: ZONE: 210 INTERVAL:
SKILL: ACCESS:
MECH. INSP.
** ON A/C ALL
TASK 31-60-00-740-007-A
GROUND SCANNING Test of the DMC
1. Reason for the Job
Self explanatory
2 Job Set-up Information
A. Work Zones and Access Panels
ZONE/ACCESS ZONE DESCRIPTION
210 CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD
B. Referenced Information
REFERENCE DESIGNATION
(Ref. 24-41-00-861-002-A). Energize the Aircraft Electrical Circuits from the External
Power
(Ref. 24-41-00-861-002-A- Energize the Aircraft Electrical Circuits from the APU
01).
(Ref. 24-41-00-861-002-A- Energize the Aircraft Electrical Circuits from Engine 1(2)
02).
(Ref. 24-41-00-862-002-A). De-energize the Aircraft Electrical Circuits Supplied from
the External Power
(Ref. 24-41-00-862-002-A- De-energize the Aircraft Electrical Circuits Supplied from
01). the APU
(Ref. 24-41-00-862-002-A- De-energize the Aircraft Electrical Circuits Supplied from
02). the Engine 1(2)
(Ref. 31-32-00-860-008-A). Procedure to Get Access to the SYSTEM REPORT/
TEST/INST Page
(Ref. 31-60-00-860-001-A). EIS Start Procedure
(Ref. 31-60-00-860-002-A). EIS Stop Procedure
(Ref. 34-10-00-860-002-A). ADIRS Start Procedure
(Ref. 34-10-00-860-005-A). ADIRS Stop Procedure
3. Job Set-up
Subtask 31-60-00-860-077-A
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002)
JCP Title: temporary job card package CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 1 of 3
JCP Ref: reference DATABASE REV DATE: Nov 01/2018
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Jan 25/2019 12:56
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
JOB CARD MPD-TASK:
CEB - A318/A319/A320/A321 AMM TASK : 31-60-00-740-007-A
31-60-00 PB 501
TITLE:
A/C Reg.:
31-60-00-740-007-A - GROUND
RP-C4108
SCANNING Test of the DMC
MECH. INSP.
(2) Do the EIS start procedure (Ref. AMM TASK 31-60-00-860-001)
(3) On the MCDU, get the SYSTEM REPORT/TEST INST menu page
(Ref. AMM TASK 31-32-00-860-008)
(4) Do the ADIRS start procedure (Ref. AMM TASK 34-10-00-860-002)
Subtask 31-60-00-865-063-A
B. Make sure that this(these) circuit breaker(s) is(are) closed:
PANEL DESIGNATION FIN LOCATION
49VU EIS/DMC3/SWTG 21WT3 E07
49VU EIS/ECAM DU/UPPER/SWTG 24WT1 E06
49VU EIS/ECAM DU/UPPER/SPLY 13WT1 E05
49VU EIS/PFD CAPT/SWTG 22WT1 E04
49VU EIS/PFD/CAPT/SPLY 11WT1 E03
49VU EIS/ND CAPT/SWTG 23WT1 E02
49VU EIS/ND CAPT/SPLY 12WT1 E01
** ON A/C 101-250
49VU EIS/ECAM/CTL/PNL 15WT E12
49VU EIS/DMC1/SPLY 10WT1 E11
49VU EIS/DMC3/STBY/SPLY 14WT1 E10
49VU EIS/DMC1/SWTG 21WT1 E09
** ON A/C ALL
121VU EIS/DMC3/SPLY 10WT3 Q09
121VU EIS/DMC2/SPLY 10WT2 Q08
121VU EIS/ECAM DU/LOWER/SPLY 13WT2 R11
121VU EIS/ECAM DU/LOWER/SWTG 24WT2 R10
121VU EIS/DMC2/SWTG 21WT2 R08
121VU EIS/ND/F/O/SWTG 23WT2 R06
121VU EIS/PFD/F/O/SWTG 22WT2 R05
121VU EIS/ND/F/O 12WT2 R04
121VU EIS/PFD/F/O 11WT2 R03
122VU ELEC/AC/BUS1/CTL 17XN1 V25
Subtask 31-60-00-860-100-A
C. Aircraft Maintenance Configuration
(1) On the center pedestal, on the ENG panel 115VU, make sure that the ENG/
MASTER 1 and ENG/MASTER 2 control switches are at OFF.
(2) On the overhead panel, on the maintenance panel 50VU, release the ENG/
FADEC GND PWR/1 and 2 pushbutton switches (the ON legend of these
pushbutton switches comes on).
4. Procedure
Subtask 31-60-00-740-058-A
A. GROUND SCANNING test of the DMC1 (2 or 3)
JCP Title: temporary job card package CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 2 of 3
JCP Ref: reference DATABASE REV DATE: Nov 01/2018
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Jan 25/2019 12:56
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
JOB CARD MPD-TASK:
CEB - A318/A319/A320/A321 AMM TASK : 31-60-00-740-007-A
31-60-00 PB 501
TITLE:
A/C Reg.:
31-60-00-740-007-A - GROUND
RP-C4108
SCANNING Test of the DMC
MECH. INSP.
NOTE: This test is for the DMC1. For the DMC2 and DMC3, use the indication
between parentheses.
ACTION RESULT
1. On the MCDU: - the DMC1 (2 or 3) main menu page
- press the line key adjacent to the EIS1 comes into view
(2 or 3) indication - a green MAINTENANCE MODE message
comes into view on the CAPT PFD, ND,
EWD SD (F/O PFD and ND with the
DMC2), (no cockpit effect with the DMC3)
- press the line key adjacent to the - the NO FAULT DETECTED indication
GROUND SCANNING indication comes into view
- wait for 15s to confirm that no trouble - make sure that the message NO FAULT
shooting data has occured DETECTED is still displayed
- push the line key adjacent to the
RETURN indication.
5. Close-up
Subtask 31-60-00-860-078-A
A. Put the aircraft back to its initial configuration.
(1) Do the EIS Stop Procedure (Ref. AMM TASK 31-60-00-860-002)
(2) Do the ADIRS stop procedure (Ref. AMM TASK 34-10-00-860-005)
(3) On the overhead panel, on the maintenance panel 50VU, push the ENG/FADEC
GND PWR/1 and 2 pushbutton switches (the ON legend of these pushbutton
switches goes off).
(4) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002)
(5) Make sure that the work area is clean and clear of tools and other items.
*** END OF CARD ***
JCP Title: temporary job card package CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 3 of 3
JCP Ref: reference DATABASE REV DATE: Nov 01/2018
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Jan 25/2019 12:56
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
