0% found this document useful (0 votes)
15 views3 pages

Job Card: 22-70-00-710-802-A - Operational Test of The MCDU 3 Transfer

The document outlines the operational test procedure for the MCDU 3 Transfer on aircraft VT-JWR, including job setup, necessary references, and detailed steps for conducting the test. It specifies the required actions, expected results, and the process for restoring the aircraft to its initial configuration after testing. The task is part of the maintenance program and ensures compliance with safety and operational standards.

Uploaded by

linto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
15 views3 pages

Job Card: 22-70-00-710-802-A - Operational Test of The MCDU 3 Transfer

The document outlines the operational test procedure for the MCDU 3 Transfer on aircraft VT-JWR, including job setup, necessary references, and detailed steps for conducting the test. It specifies the required actions, expected results, and the process for restoring the aircraft to its initial configuration after testing. The task is part of the maintenance program and ensures compliance with safety and operational standards.

Uploaded by

linto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

JOB CARD MPD-TASK: 227500-01

JAI - A330 AMM TASK : 22-70-00-710-802-A


22-70-00 PB 501

TITLE:
A/C Reg.: 22-70-00-710-802-A - Operational
VT-JWR Test of the MCDU 3 Transfer
CARD: ZONE: 210 INTERVAL:
SKILL: ACCESS:

MECH. INSP.

** ON A/C ALL

TASK 22-70-00-710-802-A
Operational Test of the MCDU 3 Transfer

1. Reason for the Job


Refer to the MPD TASK: 227500-01
OPERATIONAL CHECK OF MCDU 3 TRANSFER.
2 Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS ZONE DESCRIPTION


210 CKPT FWD PRESSURE BHD TO CKPT PARTITION

B. Referenced Information

REFERENCE DESIGNATION
(Ref. 24-41-00-861-801-A). Energize the Aircraft Electrical Circuits from the External
Power A
(Ref. 24-41-00-861-801-A- Energize the Aircraft Electrical Circuits from the APU
01). (APU Started with APU BAT)
(Ref. 24-41-00-861-801-A- Energize the Aircraft Electrical Circuits from the External
03). Power A and B
(Ref. 24-41-00-861-801-A- Energize the Aircraft Electrical Circuits from the APU
04). (APU started with External power A)
(Ref. 24-41-00-861-801-A- Energize the Aircraft Electrical Circuits from the External
05). Power B
(Ref. 24-41-00-862-801-A). De-energize the Aircraft Electrical Circuits from the
External Power A
(Ref. 24-41-00-862-801-A- De-energize the Aircraft Electrical Circuits from the APU
01).
(Ref. 24-41-00-862-801-A- De-energize the Aircraft Electrical Circuits from the
03). External Power A and B
(Ref. 24-41-00-862-801-A- De-energize the Aircraft Electrical Circuits from the
04). External Power B
(Ref. 31-60-00-860-801-A). EIS Start Procedure
(Ref. 31-60-00-860-802-A). EIS Stop Procedure

3. Job Set-up

JCP Title: C-CHECK CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 1 of 3


JCP Ref: C-CHECK DATABASE REV DATE: Apr 01/2017
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Apr 06/2017 09:23
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
JOB CARD MPD-TASK: 227500-01
JAI - A330 AMM TASK : 22-70-00-710-802-A
22-70-00 PB 501

TITLE:
A/C Reg.: 22-70-00-710-802-A - Operational
VT-JWR Test of the MCDU 3 Transfer
MECH. INSP.

** ON A/C ALL

EMB SB 22-3052 for A/C 001-001


Subtask 22-70-00-860-052-B
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-801) .
(2) Do the EIS start procedure (only EWD and SD)
(Ref. AMM TASK 31-60-00-860-801) .
(3) On the SWITCHING control panel 135VU, make sure that the SWITCHING/FM
selector switch is in the NORM position.
(4) On the Multipurpose Control & Display Unit (MCDUs) 1, 2 and 3, push the BRT
key to put the MCDU ON.

** ON A/C ALL
Subtask 22-70-00-865-051-A
B. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL DESIGNATION FIN LOCATION


722VU MCDU 2 7CA2 C47
722VU FMGEC 2 5CA2 R43
742VU FMGEC 1 5CA1 M75
742VU MCDU 3 7CA3 N71
742VU MCDU 1 7CA1 Q61
4. Procedure

** ON A/C ALL

EMB SB 22-3052 for A/C 001-001


Subtask 22-70-00-710-051-B
A. Operational Test of the MCDU 3 Transfer
This test is for system 1. For the other system(s), use the indications between the
parentheses.

ACTION RESULT
1.On the MCDU 1 (2): On the MCDU 1 (2):
· push the F-PLN mode key. · the F-PLN page comes into view.
2.On the MCDU 1 (2): On the MCDU 3, on the MCDU MENU
· Push and hold the DIM key to put the page:
MCDU OFF. · the FM 1 (2) indication comes into view
after 5 seconds.
3.On the MCDU 1 (2): On the MCDU 1 (2):
· the F-PLN page comes into view.
JCP Title: C-CHECK CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 2 of 3
JCP Ref: C-CHECK DATABASE REV DATE: Apr 01/2017
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Apr 06/2017 09:23
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
JOB CARD MPD-TASK: 227500-01
JAI - A330 AMM TASK : 22-70-00-710-802-A
22-70-00 PB 501

TITLE:
A/C Reg.: 22-70-00-710-802-A - Operational
VT-JWR Test of the MCDU 3 Transfer
MECH. INSP.

ACTION RESULT
· Press the BRT key to put the MCDU On the MCDU 3, on the MCDU MENU
ON. page:
· the FM 1 (2) indication goes out of view.

** ON A/C ALL
5. Close-up

** ON A/C ALL

EMB SB 22-3052 for A/C 001-001


Subtask 22-70-00-860-053-B
A. Put the aircraft back to its initial configuration.
(1) Do the EIS stop procedure (Ref. AMM TASK 31-60-00-860-802) .
(2) On the MCDUs 1, 2 and 3, push and hold the DIM key to put the MCDU OFF.
(3) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-801) .
*** END OF CARD ***

JCP Title: C-CHECK CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 3 of 3


JCP Ref: C-CHECK DATABASE REV DATE: Apr 01/2017
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Apr 06/2017 09:23
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE

You might also like