FULLY FOLDABLE CRANE

TECHNICAL SPECIFICATION
HLM 10-2S
OVERALL DIMENSIONS [mm]

1990 600 1500 715 715

2260

700
270

700
70

70
150
100

100
640
700

150
N° 20 ∅19,5
N° 20 Screws M18 -10.9
640
(*) Variable dimension

TECHNICAL DATA
Hydraulic extensions N° 2 Empty weight of the crane kg 1650
Net lifting moment t-m 10 Recommended amount of oil lt 100
Slewing torque kg-m 1300 Slewing speed rpm 1,2
Slewing angle (continuous) ° 380 Main boom lifting time sec 19
Pump capacity lt/min 30 Secondary boom articulation time sec 20
Max working pressure bar 220 Boom element extension time sec 18
April 2017

STANDARD FEATURES AVAILABLE OPTIONALS

1,5 ton direct pull winch rope Ø 10
Winch limit switch

Load limiting device

Size 3 electrohydraulic power pack (HP 20)
Control panel out of the crane
Sheave block with Ø 200 pulley
1st manual extension 0,80 ton @ 10,34 m
2st manual extension 0,60 ton @ 12,24 m

The technical data contained in this card are only indicative and can be changed without notice. HLRM10-2S Rev.00

HEILA CRANES S.p.A. | Via Romana 34/6 - 42028 Poviglio (RE) Italy | info@heila.com | www.heila.com
 FULLY FOLDABLE CRANE

TECHNICAL SPECIFICATION
HLM 10-2S
12
.

1 ft (foot) = 0,3048 m 11
t 1,50
10

9
t 2,00
8
t 1,25
7
t 2,90 t 1,70
6

t 2,50 5

t 3,60 t 2,00 t 1,35 t 1,00

April 2017

m 2,74 m 4,65 m 6,54 m 8,40 1

0
0 1 2 3 4 5 6 7 8 9 10
100%
α 80%

60% Active
Q Work
40%
Q
20%

0%
0° 1° 2° 3° 4° 5° 6° 7° 8° 9° 10° 11° 12° 13° 14° 15°
α
The technical data contained in this card are only indicative and can be changed without notice. HLRM10-2S Rev.00

HEILA CRANES S.p.A. | Via Romana 34/6 - 42028 Poviglio (RE) Italy | info@heila.com | www.heila.com