Requirements
for OMICRON Test Universe 3.20
Requirements
Test Universe 3.20 - Manual Version: Req.ENU.02 - Year: 2017
© OMICRON electronics GmbH. All rights reserved.
This manual is a publication of OMICRON electronics GmbH.
All rights including translation reserved. Reproduction of any kind, e.g., photocopying, microfilming,
optical character recognition and/or storage in electronic data processing systems, requires the explicit
consent of OMICRON electronics. Reprinting, wholly or in part, is not permitted.
The product information, specifications, and technical data embodied in this manual represent the
technical status at the time of writing and are subject to change without prior notice.
2
Requirements
Requirements
This file lists the operating system and PC hardware requirements necessary to run the contents of the
OMICRON DVD.
The DVD typically contains:
• OMICRON Test Universe 3.20
• OMICRON Tutorials
1 Requirements for OMICRON Test Universe
List of operating system and PC hardware requirements necessary to run Test Universe 3.20.
Operating system
Test Universe 3.20 is tested to be compliant to the following versions of Microsoft Windows:
• Windows 7 (32 bit/x86 and 64 bit)
• Windows 8/8.1 (32 bit/x86 and 64 bit)
• Windows 10 (32 bit/x86 and 64 bit)
Recommended minimum hardware requirements for computer hardware
• 1.5 GHz Pentium 4
• 2 GB RAM (Windows 7, 8 and 10)
• 1024 x 768 pixels or higher-resolution video adapter and monitor
• 1.5 GB of available hard disk space
• DVD drive
• Ethernet NIC1 for network-compatible CMC test sets.
• USB 2.0 port for CMC test sets with USB connector.
• For CMC test sets with parallel port interface either a parallel printer port is needed or a USB port in
combination with a CMUSB-P converter.
Note: The use of a parallel printer port works with Windows 7 (32 bit/x86), only.
1. Ethernet NIC: An Ethernet Network Interface Card is a PC board (or integrated module) that serves as interface between a network-com-
patible device (PC, notebook, CMC test set) and the "outside world" (PC, network hub, Internet). The NICs are used to interface with CMC
test set(s) connected to the Ethernet via RJ 45 connector.
3
Requirements
2 Requirements for CM Line Tools
List of operating system and PC hardware requirements necessary to run the OMICRON CM Line Tools.
Test Universe Protection Testing Library PTL
The requirements are identical to the ones of the OMICRON Test Universe 3.20 listed above
(→ “Requirements for OMICRON Test Universe” on page 3).
Test Universe Tutorials
Microsoft Windows with a preferably up-to-date version of one of the following Web browsers: Internet
Explorer, Mozilla Firefox, Opera, Google Chrome.
Test Universe Field Calibration Software FCS
The Test Universe Field Calibration Software is tested to be compliant to the following versions of
Microsoft Windows:
• Windows 7 (32 bit/x86 and 64 bit)
• Windows 8/8.1 (32 bit/x86 and 64 bit)
• Windows 10 (32 bit/x86 and 64 bit)
3 Firewall Configuration for Using Network-Compatible
CMC Test Sets
A proper firewall configuration is essential to successfully establish a communication between your CMC
and your computer. This applies to both Ethernet and USB ports.
For details about a proper firewall configuration, refer to the Getting Started with Test Universe
manual, chapter Firewall Configuration.
You can also find a firewall topic in the Test Universe Help. Navigate to the Help topic How do
CMC Test Sets Communicate with a Test Universe computer?.
4
Support
Support
When you are working with our products we want to provide you with the
greatest possible benefits. If you need any support, we are here to assist you!
24/7 Technical Support – Get Support
www.omicronenergy.com/support
At our technical support hotline, you can reach well-educated technicians for all
of your questions. Around the clock – competent and free of charge.
Make use of our 24/7 international technical support hotline:
Americas: +1 713 830-4660 or +1 800-OMICRON
Asia-Pacific: +852 3767 5500
Europe / Middle East / Africa: +43 59495 4444
Additionally, you can find our Service Center or Sales Partner closest to you at
www.omicronenergy.com.
Customer Portal – Stay Informed
www.omicronenergy.com/customer
The Customer Portal on our website is an international knowledge exchange
platform. Download the latest software updates for all products and share your
own experiences in our user forum.
Browse through the knowledge library and find application notes, conference
papers, articles about daily working experiences, user manuals and much more.
OMICRON Academy – Learn More
www.omicronenergy.com/academy
Learn more about your product in one of the training courses offered by the
OMICRON Academy.
OMICRON electronics GmbH, Oberes Ried 1, 6833 Klaus, Austria, +43 59495
