Place the ISN directly where

CADDY ® ERISTRUT
ISN NUT - M6, M8, M10 UM-UD-UA STRUT NUTS UM-UD-UA Strut Nuts
1. Push to open
you need it • UM: nut for 41 x 41 mm and 41 x 21 mm profiles
• UD: short spring nut for 41 x 21 mm profiles
• For example, as a lock nut • UA: long spring nut for 41 x 41 mm profiles
• No need to disassemble UM
• Thread M6, M8, M10 and M12
existing installations • Hot dipped galvanised (stainless steel available upon request)
• No need to remove plaster,
2. Opened
dirt, etc.
• No need to change threaded UD
rods because of damaged
threads
• No need to clean up threads
Description
Part M H Description
Part M H Part M H
No mm mm
Description
No mm mm No mm mm
UA
UM506 315000 6 5 3 100 UD506 315040 6 5 3 100 UA506 315080 6 5 3 100
UM608 315010 8 6 3 100 UD608 315050 8 6 3 100 UA608 315090 8 6 3 100
UM810 315020 10 8 3 100 UD810 315060 10 8 3 100 UA810 315100 10 8 3 100
UM812 315030 12 8 3 100 UD812 315070 12 8 3 100 UA812 315110 12 8 3 100

Ø
Description Part No NS
M KG

ISN M6 187340 M6 75 1 50 • M6, M8, M10 threads

PRE-MOUNTED NUT TM
Pre-Mounted Nut TM PROFILE END CAPS
ISN M8 187350 M8 100 1 50 • Patented
ISN M10 187360 M10 100 1 50 • Convenient dispenser box • For CADDY ®

profile types
41 x 21 mm
and 41 x 41
mm

CADDY® SLICK Installation • TM Nuts are

CADDY® ERISTRUT
STRUT NUT hot dipped Profile End Caps
• Locates directly onto strut profile galvanised black PA for profiles
•
•
Height adjustment possible
Easy to mount ”one handed installation”
41 x 41 mm - 41 x 21 mm
CADDY® ERISTRUT
• Less “on site wastage” Description Part No M Description Part No Profiles Accessories
• Easy to re-locate
TMN 8x40 590080 8 1 100 ADK421 313305 41x21 10 100

Description Part No
Ø NS
KG
TMN 10x40 590090 10 1 100 CADDY®
M
Fixings, Fasteners
Fig. 1-2 Fig. 3* Fig. 4

SLICK M6 174460 M6 125 60 70 7 100

M SLICK M8 174340 M8 150 60 75 7 100 WARNING
ERICO products shall be installed and used only as indicated in ERICO’s product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse,
and Supports
SLICK M10 174350 M10 150 60 75 7 100 misapplication or other failure to completely follow ERICO’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

The best invention SLICK M12 174550 M12 150 60 75 7 100

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE),

since the spring nut

SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must
CADDY SLICK STRUT NUT *For fixing direct to the CADDY SLICK STRUT NUT.
be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly
be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended GREENLEE FACILITY SOLUTIONS INC
can also be combined with procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER’S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY
The CADDY SLICK STRUT NUT the CADDY® ISN NUT.
AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
Jane May A. Camacho
LIMITATION OF LIABILITY
is a fast and easy way to fix NS
KG ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT Sales Representative
BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.
one threaded rod onto
The CADDY SLICK STRUT Copyright ©2008 ERICO International Corporation. All rights reserved. Contact Number: 0998-9656-782
universal strut profiles. NUT is also available CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.
Ideal for electrical, plumbing with pre-mounted Email Address: Jmcamacho@greenleefacility.com
ERICO Australia 323 Parramatta Road, Auburn, NSW 2144, Australia
and heating, ventilation and threaded rods, M8 Telephone: 61-2-9751 8500 • Fax: 61-2-9475 5334
all service applications. and M10. NS NS NS
KG KG KG ERICO Singapore Jurong Industrial Estate, 16 Wan Lee Road, Singapore 627 946
Fig.1 Fig.2 Fig.3 Fig.4 Telephone: 65 6 268 3433 • Fax: 65 6 268 1389
ERICO Hong Kong Unit 1, 2nd. Floor, Block A, Po Yip Building, 62-70 Texaco Road,
Tsuen Wan, New Territories, Hong Kong
Telephone: 852 2764 8808 • Fax: 852 2764 4486
www.erico.com
www.erico.com F579B-AAEN F1008LT08AAEN 0064M8
CADDY® ERISTRUT strut support systems and Structural fixing systems require a high
accessories from ERICO® provide solutions degree of reliability, the kind of reliability CADDY® ERISTRUT
to fixing and fastening problems in the only built into products after years of CANTILEVER ARM SUPPORTS ACCESSORIES
electrical, mechanical and datacomm experience in the field.
L
installation industries. KHC Cantilever Arm Description Item mm
RIGHT ANGLE
Description Part No ANGLE Description Part No
CADDY® Fasteners: Wall Mounting Bracket KH150 KH10C 150 3 1 BRACKET BRACKET
2 HOLES
• provide full corrosion protection • Welded profile 41 x 41 mm KH200 KH5C 200 3 1 ZEA 107 387570 3 1 ZWA 200 387600 3 1
• offer a wide range of solutions • Hot dipped galvanised KH250 KH6C 250 3 1
• are simple and easy to install KH300 KH11C 300 3 1
TEE BRACKET
Description Part No
ANGLE Description Part No
• save time and money KH400 KH15C 400 3 1 BRACKET
KH450 KH12C 450 3 1 ZEA 108 387580 3 1 2 HOLES
ZWA 201 387610 3 1
Admissible Load KH550 KH16C 550 3 1
CADDY® ERISTRUT Rating in kg KH600 KH13C 600 3 1 CROSS OVER
NU Description Part No
KG KH650 KH8C 650 3 1 PLATE
Profile 41 x 21 KH700 KH9C 700 3 1 ZEA 109 387590 3 1
ANGLE
BRACKET
Description Part No

DG KH750 KH14C 750 3 1

3 HOLES
ZWA 202 387620 3 1
• Thickness 2,5 mm
=A =B Description Part No
• Hot dipped galvanised WIDE TEE
PLATE ANGLE
ZEA 110 387450 3 1 Description Part No
Description Part No
L
m
Admissible Load Rating in kg Length A B C D BRACKET
4 HOLES
150 650 650 325 325 ZWA 205 387650 3 1
41x21 DG ES4121PLX3 3 3 1 =C
200 480 480 240 240 SINGLE BASE
Description Part No
41x21 DG ES4121PLX6 6 3 1 Length A B C
250 390 390 190 190 PLATE
DG =A =B ZGA 501 388270 3 1 ANGLE Description Part No
300 325 325 162 162
Profile 41 x 41 41 x 21 x 2.5 mm
400 240 240 120 120
BRACKET
4 HOLES
AG 450 217 277 108 108 SINGLE CROSS
ZWA 207 387670 3 1
500 128 257 96 Description Part No
• Thickness 2,5 mm 1000 64 127 48 550 170 170 88 88 OVER BRACKET
41 x 41 mm
• Hot dipped galvanised 1500 42 83 31 600 162 162 81 81 ZSA 301 387740 3 1
2000 30 61 23 WIDE Description Part No
=C =D 650 150 150 75 75 TEE ANGLE
L 3000 19 38 14
Description Part No m 6000 5 11 5 NU 700 140 140 70 70 BRACKET
ZWA 209 387690 3 1
KG Description Part No 4 HOLES
750 130 130 63 63 CORNER
ANGLE
41x41 AG ES4141PLX3 3 3 1 AG BRACKET
41 x 41 x 2.5 mm ZSA 304 388110 3 1
41x41 AG ES4141PLX6 6 3 1
OFFSET Description Part No
ANGLE
500 404 808 303 ECB Cantilever Arm SUPPORT
BRACKETS BRACKET
Profile 41 x 21 1000 201 402 151 Wall Mounting Bracket
Description Item
L Description Part No RIGHT ZWA 214 387890 3 1
1500 133 266 100 mm NS
Holes on back 2000 99 197 74
with Brace KG
ZT 601 313200 3 1
DB 3000 64 127 48 • Welded profile 41 x 41 x 2.5 mm ECB150 ECB150 320 3 1 1000
per pair OFFSET
6000 26 52 20 ECB300 ECB300 470 3 1 Description Part No
• Thickness 2,5 mm • Brace profile 41 x 21 x 2.5 mm
ANGLE
BRACKET
ECB450 ECB450 635 3 1 INTERNAL
• Hot dipped galvanised DB
• Hot dipped galvanised SUPPORT
Description Part No LEFT ZWA 215 387900 3 1
41 x 21 x 2.5 mm ECB600 ECB600 780 3 1 BRACKET
L holes on the back ZTA 605 388080 3 1
Description Part No m
500 121 242 91 TRANSVERSE
41x21 DB ES4121SLOTX3 3 3 1 1000 60 120 45 CORNER
Description Part No
PROFILE
41x21 DB ES4121SLOTX6 6 3 1 1500 39 78 30 Description Part No BRACKET
2000 29 57 22 CADDY® ERISTRUT Description Part No
END
BRACKET ZZ 701 388400 3 1
3000 18 35 14 ACCESSORIES OBLONG PLATE ZT 606 313270 3 1
Profile 41 x 41 6000 5 10 4 4 HOLES ZEA 104 387540 3 1
Holes on back
AB AB
41 x 41 x 2.5 mm SQUARE PLATE Description Part No
VARIABLE ANGLE Description Part No Description Part No
TRANSVERSE
SUPPORT
Description Part No
OFFSET
• Thickness 2,5 mm holes on the back 1 HOLE
BRACKET
3 HOLES
TEE BRACKET
BRACKET
ZZA 702 387720 3 1
• Hot dipped galvanised ZEA 100 387500 3 1 ZEA 106 387560 3 1 41 x 41 mm ZUA 400 387750 3 1

L
500 382 763 286
Description Part No m 1000 190 380 143 RECTANGULAR Description Part No Description Part No OFFSET WINDOW
1500 126 251 94 Description Part No BRACKET Description Part No
PLATE ANGLE TEE BRACKET
41x41 AB ES4141SLOTX3 3 3 1 2000 93 186 70 2 HOLES BRACKET ZWA 202 387620 3 1
41 x 21 mm Inc. cone pointed
ZEA 102 387520 3 1 ZUA 401 387760 3 1 bolt, M12 x 40 mm ZZ 704 313870 3 1
41x41 AB ES4141SLOTX6 6 3 1 3000 60 120 45 3 HOLES
6000 24 48 19

www.erico.com www.erico.com www.erico.com

CADDY® ERISTRUT strut support systems and Structural fixing systems require a high
accessories from ERICO® provide solutions degree of reliability, the kind of reliability CADDY® ERISTRUT
to fixing and fastening problems in the only built into products after years of CANTILEVER ARM SUPPORTS ACCESSORIES
electrical, mechanical and datacomm experience in the field.
L
installation industries. KHC Cantilever Arm Description Item mm
RIGHT ANGLE
Description Part No ANGLE Description Part No
CADDY® Fasteners: Wall Mounting Bracket KH150 KH10C 150 3 1 BRACKET BRACKET
2 HOLES
• provide full corrosion protection • Welded profile 41 x 41 mm KH200 KH5C 200 3 1 ZEA 107 387570 3 1 ZWA 200 387600 3 1
• offer a wide range of solutions • Hot dipped galvanised KH250 KH6C 250 3 1
• are simple and easy to install KH300 KH11C 300 3 1
TEE BRACKET
Description Part No
ANGLE Description Part No
• save time and money KH400 KH15C 400 3 1 BRACKET
KH450 KH12C 450 3 1 ZEA 108 387580 3 1 2 HOLES
ZWA 201 387610 3 1
Admissible Load KH550 KH16C 550 3 1
CADDY® ERISTRUT Rating in kg KH600 KH13C 600 3 1 CROSS OVER
NU Description Part No
KG KH650 KH8C 650 3 1 PLATE
Profile 41 x 21 KH700 KH9C 700 3 1 ZEA 109 387590 3 1
ANGLE
BRACKET
Description Part No

DG KH750 KH14C 750 3 1

3 HOLES
ZWA 202 387620 3 1
• Thickness 2,5 mm
=A =B Description Part No
• Hot dipped galvanised WIDE TEE
PLATE ANGLE
ZEA 110 387450 3 1 Description Part No
Description Part No
L
m
Admissible Load Rating in kg Length A B C D BRACKET
4 HOLES
150 650 650 325 325 ZWA 205 387650 3 1
41x21 DG ES4121PLX3 3 3 1 =C
200 480 480 240 240 SINGLE BASE
Description Part No
41x21 DG ES4121PLX6 6 3 1 Length A B C
250 390 390 190 190 PLATE
DG =A =B ZGA 501 388270 3 1 ANGLE Description Part No
300 325 325 162 162
Profile 41 x 41 41 x 21 x 2.5 mm
400 240 240 120 120
BRACKET
4 HOLES
AG 450 217 277 108 108 SINGLE CROSS
ZWA 207 387670 3 1
500 128 257 96 Description Part No
• Thickness 2,5 mm 1000 64 127 48 550 170 170 88 88 OVER BRACKET
41 x 41 mm
• Hot dipped galvanised 1500 42 83 31 600 162 162 81 81 ZSA 301 387740 3 1
2000 30 61 23 WIDE Description Part No
=C =D 650 150 150 75 75 TEE ANGLE
L 3000 19 38 14
Description Part No m 6000 5 11 5 NU 700 140 140 70 70 BRACKET
ZWA 209 387690 3 1
KG Description Part No 4 HOLES
750 130 130 63 63 CORNER
ANGLE
41x41 AG ES4141PLX3 3 3 1 AG BRACKET
41 x 41 x 2.5 mm ZSA 304 388110 3 1
41x41 AG ES4141PLX6 6 3 1
OFFSET Description Part No
ANGLE
500 404 808 303 ECB Cantilever Arm SUPPORT
BRACKETS BRACKET
Profile 41 x 21 1000 201 402 151 Wall Mounting Bracket
Description Item
L Description Part No RIGHT ZWA 214 387890 3 1
1500 133 266 100 mm NS
Holes on back 2000 99 197 74
with Brace KG
ZT 601 313200 3 1
DB 3000 64 127 48 • Welded profile 41 x 41 x 2.5 mm ECB150 ECB150 320 3 1 1000
per pair OFFSET
6000 26 52 20 ECB300 ECB300 470 3 1 Description Part No
• Thickness 2,5 mm • Brace profile 41 x 21 x 2.5 mm
ANGLE
BRACKET
ECB450 ECB450 635 3 1 INTERNAL
• Hot dipped galvanised DB
• Hot dipped galvanised SUPPORT
Description Part No LEFT ZWA 215 387900 3 1
41 x 21 x 2.5 mm ECB600 ECB600 780 3 1 BRACKET
L holes on the back ZTA 605 388080 3 1
Description Part No m
500 121 242 91 TRANSVERSE
41x21 DB ES4121SLOTX3 3 3 1 1000 60 120 45 CORNER
Description Part No
PROFILE
41x21 DB ES4121SLOTX6 6 3 1 1500 39 78 30 Description Part No BRACKET
2000 29 57 22 CADDY® ERISTRUT Description Part No
END
BRACKET ZZ 701 388400 3 1
3000 18 35 14 ACCESSORIES OBLONG PLATE ZT 606 313270 3 1
Profile 41 x 41 6000 5 10 4 4 HOLES ZEA 104 387540 3 1
Holes on back
AB AB
41 x 41 x 2.5 mm SQUARE PLATE Description Part No
VARIABLE ANGLE Description Part No Description Part No
TRANSVERSE
SUPPORT
Description Part No
OFFSET
• Thickness 2,5 mm holes on the back 1 HOLE
BRACKET
3 HOLES
TEE BRACKET
BRACKET
ZZA 702 387720 3 1
• Hot dipped galvanised ZEA 100 387500 3 1 ZEA 106 387560 3 1 41 x 41 mm ZUA 400 387750 3 1

L
500 382 763 286
Description Part No m 1000 190 380 143 RECTANGULAR Description Part No Description Part No OFFSET WINDOW
1500 126 251 94 Description Part No BRACKET Description Part No
PLATE ANGLE TEE BRACKET
41x41 AB ES4141SLOTX3 3 3 1 2000 93 186 70 2 HOLES BRACKET ZWA 202 387620 3 1
41 x 21 mm Inc. cone pointed
ZEA 102 387520 3 1 ZUA 401 387760 3 1 bolt, M12 x 40 mm ZZ 704 313870 3 1
41x41 AB ES4141SLOTX6 6 3 1 3000 60 120 45 3 HOLES
6000 24 48 19

www.erico.com www.erico.com www.erico.com

CADDY® ERISTRUT strut support systems and Structural fixing systems require a high
accessories from ERICO® provide solutions degree of reliability, the kind of reliability CADDY® ERISTRUT
to fixing and fastening problems in the only built into products after years of CANTILEVER ARM SUPPORTS ACCESSORIES
electrical, mechanical and datacomm experience in the field.
L
installation industries. KHC Cantilever Arm Description Item mm
RIGHT ANGLE
Description Part No ANGLE Description Part No
CADDY® Fasteners: Wall Mounting Bracket KH150 KH10C 150 3 1 BRACKET BRACKET
2 HOLES
• provide full corrosion protection • Welded profile 41 x 41 mm KH200 KH5C 200 3 1 ZEA 107 387570 3 1 ZWA 200 387600 3 1
• offer a wide range of solutions • Hot dipped galvanised KH250 KH6C 250 3 1
• are simple and easy to install KH300 KH11C 300 3 1
TEE BRACKET
Description Part No
ANGLE Description Part No
• save time and money KH400 KH15C 400 3 1 BRACKET
KH450 KH12C 450 3 1 ZEA 108 387580 3 1 2 HOLES
ZWA 201 387610 3 1
Admissible Load KH550 KH16C 550 3 1
CADDY® ERISTRUT Rating in kg KH600 KH13C 600 3 1 CROSS OVER
NU Description Part No
KG KH650 KH8C 650 3 1 PLATE
Profile 41 x 21 KH700 KH9C 700 3 1 ZEA 109 387590 3 1
ANGLE
BRACKET
Description Part No

DG KH750 KH14C 750 3 1

3 HOLES
ZWA 202 387620 3 1
• Thickness 2,5 mm
=A =B Description Part No
• Hot dipped galvanised WIDE TEE
PLATE ANGLE
ZEA 110 387450 3 1 Description Part No
Description Part No
L
m
Admissible Load Rating in kg Length A B C D BRACKET
4 HOLES
150 650 650 325 325 ZWA 205 387650 3 1
41x21 DG ES4121PLX3 3 3 1 =C
200 480 480 240 240 SINGLE BASE
Description Part No
41x21 DG ES4121PLX6 6 3 1 Length A B C
250 390 390 190 190 PLATE
DG =A =B ZGA 501 388270 3 1 ANGLE Description Part No
300 325 325 162 162
Profile 41 x 41 41 x 21 x 2.5 mm
400 240 240 120 120
BRACKET
4 HOLES
AG 450 217 277 108 108 SINGLE CROSS
ZWA 207 387670 3 1
500 128 257 96 Description Part No
• Thickness 2,5 mm 1000 64 127 48 550 170 170 88 88 OVER BRACKET
41 x 41 mm
• Hot dipped galvanised 1500 42 83 31 600 162 162 81 81 ZSA 301 387740 3 1
2000 30 61 23 WIDE Description Part No
=C =D 650 150 150 75 75 TEE ANGLE
L 3000 19 38 14
Description Part No m 6000 5 11 5 NU 700 140 140 70 70 BRACKET
ZWA 209 387690 3 1
KG Description Part No 4 HOLES
750 130 130 63 63 CORNER
ANGLE
41x41 AG ES4141PLX3 3 3 1 AG BRACKET
41 x 41 x 2.5 mm ZSA 304 388110 3 1
41x41 AG ES4141PLX6 6 3 1
OFFSET Description Part No
ANGLE
500 404 808 303 ECB Cantilever Arm SUPPORT
BRACKETS BRACKET
Profile 41 x 21 1000 201 402 151 Wall Mounting Bracket
Description Item
L Description Part No RIGHT ZWA 214 387890 3 1
1500 133 266 100 mm NS
Holes on back 2000 99 197 74
with Brace KG
ZT 601 313200 3 1
DB 3000 64 127 48 • Welded profile 41 x 41 x 2.5 mm ECB150 ECB150 320 3 1 1000
per pair OFFSET
6000 26 52 20 ECB300 ECB300 470 3 1 Description Part No
• Thickness 2,5 mm • Brace profile 41 x 21 x 2.5 mm
ANGLE
BRACKET
ECB450 ECB450 635 3 1 INTERNAL
• Hot dipped galvanised DB
• Hot dipped galvanised SUPPORT
Description Part No LEFT ZWA 215 387900 3 1
41 x 21 x 2.5 mm ECB600 ECB600 780 3 1 BRACKET
L holes on the back ZTA 605 388080 3 1
Description Part No m
500 121 242 91 TRANSVERSE
41x21 DB ES4121SLOTX3 3 3 1 1000 60 120 45 CORNER
Description Part No
PROFILE
41x21 DB ES4121SLOTX6 6 3 1 1500 39 78 30 Description Part No BRACKET
2000 29 57 22 CADDY® ERISTRUT Description Part No
END
BRACKET ZZ 701 388400 3 1
3000 18 35 14 ACCESSORIES OBLONG PLATE ZT 606 313270 3 1
Profile 41 x 41 6000 5 10 4 4 HOLES ZEA 104 387540 3 1
Holes on back
AB AB
41 x 41 x 2.5 mm SQUARE PLATE Description Part No
VARIABLE ANGLE Description Part No Description Part No
TRANSVERSE
SUPPORT
Description Part No
OFFSET
• Thickness 2,5 mm holes on the back 1 HOLE
BRACKET
3 HOLES
TEE BRACKET
BRACKET
ZZA 702 387720 3 1
• Hot dipped galvanised ZEA 100 387500 3 1 ZEA 106 387560 3 1 41 x 41 mm ZUA 400 387750 3 1

L
500 382 763 286
Description Part No m 1000 190 380 143 RECTANGULAR Description Part No Description Part No OFFSET WINDOW
1500 126 251 94 Description Part No BRACKET Description Part No
PLATE ANGLE TEE BRACKET
41x41 AB ES4141SLOTX3 3 3 1 2000 93 186 70 2 HOLES BRACKET ZWA 202 387620 3 1
41 x 21 mm Inc. cone pointed
ZEA 102 387520 3 1 ZUA 401 387760 3 1 bolt, M12 x 40 mm ZZ 704 313870 3 1
41x41 AB ES4141SLOTX6 6 3 1 3000 60 120 45 3 HOLES
6000 24 48 19

www.erico.com www.erico.com www.erico.com

 Place the ISN directly where
CADDY ® ERISTRUT
ISN NUT - M6, M8, M10 UM-UD-UA STRUT NUTS UM-UD-UA Strut Nuts
1. Push to open
you need it • UM: nut for 41 x 41 mm and 41 x 21 mm profiles
• UD: short spring nut for 41 x 21 mm profiles
• For example, as a lock nut • UA: long spring nut for 41 x 41 mm profiles
• No need to disassemble UM
• Thread M6, M8, M10 and M12
existing installations • Hot dipped galvanised (stainless steel available upon request)
• No need to remove plaster,
2. Opened
dirt, etc.
• No need to change threaded UD
rods because of damaged
threads
• No need to clean up threads
Description
Part M H Description
Part M H Part M H
No mm mm
Description
No mm mm No mm mm
UA
UM506 315000 6 5 3 100 UD506 315040 6 5 3 100 UA506 315080 6 5 3 100
UM608 315010 8 6 3 100 UD608 315050 8 6 3 100 UA608 315090 8 6 3 100
UM810 315020 10 8 3 100 UD810 315060 10 8 3 100 UA810 315100 10 8 3 100
UM812 315030 12 8 3 100 UD812 315070 12 8 3 100 UA812 315110 12 8 3 100

Ø
Description Part No NS
M KG

ISN M6 187340 M6 75 1 50 • M6, M8, M10 threads

PRE-MOUNTED NUT TM
Pre-Mounted Nut TM PROFILE END CAPS
ISN M8 187350 M8 100 1 50 • Patented
ISN M10 187360 M10 100 1 50 • Convenient dispenser box • For CADDY ®

profile types
41 x 21 mm
and 41 x 41
mm

CADDY® SLICK Installation • TM Nuts are

CADDY® ERISTRUT
STRUT NUT hot dipped Profile End Caps
• Locates directly onto strut profile galvanised black PA for profiles
•
•
Height adjustment possible
Easy to mount ”one handed installation”
41 x 41 mm - 41 x 21 mm
CADDY® ERISTRUT
• Less “on site wastage” Description Part No M Description Part No Profiles Accessories
• Easy to re-locate
TMN 8x40 590080 8 1 100 ADK421 313305 41x21 10 100

Description Part No
Ø NS
KG
TMN 10x40 590090 10 1 100 CADDY®
M
Fixings, Fasteners
Fig. 1-2 Fig. 3* Fig. 4

SLICK M6 174460 M6 125 60 70 7 100

M SLICK M8 174340 M8 150 60 75 7 100 WARNING
ERICO products shall be installed and used only as indicated in ERICO’s product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse,
and Supports
SLICK M10 174350 M10 150 60 75 7 100 misapplication or other failure to completely follow ERICO’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

The best invention SLICK M12 174550 M12 150 60 75 7 100

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE),

since the spring nut

SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must
be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly
CADDY SLICK STRUT NUT *For fixing direct to the CADDY SLICK STRUT NUT.
be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended
can also be combined with procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER’S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY
AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
The CADDY SLICK STRUT NUT the CADDY® ISN NUT. NS LIMITATION OF LIABILITY
is a fast and easy way to fix KG ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT
BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.
one threaded rod onto
The CADDY SLICK STRUT Copyright ©2008 ERICO International Corporation. All rights reserved.
universal strut profiles. NUT is also available CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.
Ideal for electrical, plumbing with pre-mounted ERICO Australia 323 Parramatta Road, Auburn, NSW 2144, Australia
and heating, ventilation and threaded rods, M8 Telephone: 61-2-9751 8500 • Fax: 61-2-9475 5334
all service applications. and M10. NS NS NS
KG KG KG ERICO Singapore Jurong Industrial Estate, 16 Wan Lee Road, Singapore 627 946
Fig.1 Fig.2 Fig.3 Fig.4 Telephone: 65 6 268 3433 • Fax: 65 6 268 1389
ERICO Hong Kong Unit 1, 2nd. Floor, Block A, Po Yip Building, 62-70 Texaco Road,
Tsuen Wan, New Territories, Hong Kong
Telephone: 852 2764 8808 • Fax: 852 2764 4486
www.erico.com
www.erico.com F579B-AAEN F1008LT08AAEN 0064M8
 Place the ISN directly where
CADDY ® ERISTRUT
ISN NUT - M6, M8, M10 UM-UD-UA STRUT NUTS UM-UD-UA Strut Nuts
1. Push to open
you need it • UM: nut for 41 x 41 mm and 41 x 21 mm profiles
• UD: short spring nut for 41 x 21 mm profiles
• For example, as a lock nut • UA: long spring nut for 41 x 41 mm profiles
• No need to disassemble UM
• Thread M6, M8, M10 and M12
existing installations • Hot dipped galvanised (stainless steel available upon request)
• No need to remove plaster,
2. Opened
dirt, etc.
• No need to change threaded UD
rods because of damaged
threads
• No need to clean up threads
Description
Part M H Description
Part M H Part M H
No mm mm
Description
No mm mm No mm mm
UA
UM506 315000 6 5 3 100 UD506 315040 6 5 3 100 UA506 315080 6 5 3 100
UM608 315010 8 6 3 100 UD608 315050 8 6 3 100 UA608 315090 8 6 3 100
UM810 315020 10 8 3 100 UD810 315060 10 8 3 100 UA810 315100 10 8 3 100
UM812 315030 12 8 3 100 UD812 315070 12 8 3 100 UA812 315110 12 8 3 100

Ø
Description Part No NS
M KG

ISN M6 187340 M6 75 1 50 • M6, M8, M10 threads

PRE-MOUNTED NUT TM
Pre-Mounted Nut TM PROFILE END CAPS
ISN M8 187350 M8 100 1 50 • Patented
ISN M10 187360 M10 100 1 50 • Convenient dispenser box • For CADDY ®

profile types
41 x 21 mm
and 41 x 41
mm

CADDY® SLICK Installation • TM Nuts are

CADDY® ERISTRUT
STRUT NUT hot dipped Profile End Caps
• Locates directly onto strut profile galvanised blue PA for profiles
•
•
Height adjustment possible
Easy to mount ”one handed installation”
41 x 41 mm - 41 x 21 mm
CADDY® ERISTRUT
• Less “on site wastage” Description Part No M Description Part No Profiles Accessories
• Easy to re-locate
TMN 8x40 590080 8 1 100 ADK421 313305 41x21 10 100

Description Part No
Ø NS
KG
TMN 10x40 590090 10 1 100 CADDY®
M
Fixings, Fasteners
Fig. 1-2 Fig. 3* Fig. 4

SLICK M6 174460 M6 125 60 70 7 100

M SLICK M8 174340 M8 150 60 75 7 100 WARNING
ERICO products shall be installed and used only as indicated in ERICO’s product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse,
and Supports
SLICK M10 174350 M10 150 60 75 7 100 misapplication or other failure to completely follow ERICO’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

The best invention SLICK M12 174550 M12 150 60 75 7 100

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE),

since the spring nut

SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must
be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly
CADDY SLICK STRUT NUT *For fixing direct to the CADDY SLICK STRUT NUT.
be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended
can also be combined with procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER’S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY
AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
The CADDY SLICK STRUT NUT the CADDY® ISN NUT. NS LIMITATION OF LIABILITY
is a fast and easy way to fix KG ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT
BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.
one threaded rod onto
The CADDY SLICK STRUT Copyright ©2008 ERICO International Corporation. All rights reserved.
universal strut profiles. NUT is also available CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.
Ideal for electrical, plumbing with pre-mounted ERICO Australia 323 Parramatta Road, Auburn, NSW 2144, Australia
and heating, ventilation and threaded rods, M8 Telephone: 61-2-9751 8500 • Fax: 61-2-9475 5334
all service applications. and M10. NS NS NS
KG KG KG ERICO Singapore Jurong Industrial Estate, 16 Wan Lee Road, Singapore 627 946
Fig.1 Fig.2 Fig.3 Fig.4 Telephone: 65 6 268 3433 • Fax: 65 6 268 1389
ERICO Hong Kong Unit 1, 2nd. Floor, Block A, Po Yip Building, 62-70 Texaco Road,
Tsuen Wan, New Territories, Hong Kong
Telephone: 852 2764 8808 • Fax: 852 2764 4486
www.erico.com
www.erico.com F579B-AAEN F1008LT08AAEN 0064M8