Scribd
Upload
1K views1 page

Troubleshooting: MID 130 Transmission Control Unit, Fault Codes

The document provides information about fault codes from the MID 130 Transmission Control Unit. It explains that the manufacturer diagnostic tool is preferred for diagnostic work and lists abbreviations used in the fault codes, including MID, SID, PID, PPID, and FMI. It also includes a table defining the different Failure Mode Identifiers.

Uploaded by

Abolfazl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
1K views1 page

Troubleshooting: MID 130 Transmission Control Unit, Fault Codes

The document provides information about fault codes from the MID 130 Transmission Control Unit. It explains that the manufacturer diagnostic tool is preferred for diagnostic work and lists abbreviations used in the fault codes, including MID, SID, PID, PPID, and FMI. It also includes a table defining the different Failure Mode Identifiers.

Uploaded by

Abolfazl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
You are on page 1/ 1

Group 43 MID 130 Transmission Control Unit, Fault Codes

Troubleshooting
MID 130 Transmission Control Unit, Fault Codes
The manufacturer diagnostic tool is the preferred tool for
performing diagnostic work. Contact your local dealer for
more information or visit “www.premiumtechtool.com”.

The control modules on the information link communicate


according to the SAE J1587 standard. The standard has been
extended with Volvo’s own supplement (PPID, PSID). The fault
codes set by the control modules contain information that is
described by the following abbreviations.

MID Message Identification Description: SID Subsystem Identification Description:


Identification of a control module. Identification of a component.
PID Parameter Identification Description: PSID Proprietary Subsystem Identification
Identification of a parameter (value). Description Volvo:
PPID Proprietary Parameter Identification Unique identification of a component.
Description Volvo: FMI Failure Mode Identifier:
Unique identification of a parameter (value). Identification of fault types.
FMI Table

FMI Display Text SAE Text


0 Too high value Data valid, but above the normal work range
1 Too low value Data valid, but below the normal work range
2 Incorrect data Data erratic, Intermittent or incorrect
3 Electrical fault Voltage above normal or shorted high
4 Electrical fault Voltage below normal or shorted low
5 Electrical fault Current below normal or open circuit
6 Electrical fault Current above normal or grounded circuit
7 Mechanical fault Mechanical system not responding properly
8 Mechanical or electrical fault Abnormal frequency, pulse width or period
9 Communication fault Abnormal update rate
10 Mechanical or electrical fault Abnormal rate of change
11 Unknown fault Failure mode not identifiable
12 Component fault Bad intelligent device or component
13 Incorrect calibration Out of calibration
14 Unknown fault Special instructions
15 Unknown fault Reserved for future assignment by SAE Data Formal Subcommittee

You might also like