Programma

TM1800 Circuit Breaker Analyzer System

Programma
TM1800 Circuit Breaker Analyzer System
TM

■ No limit circuit breaker testing

■ Build the analyzer to your requirements; add
new capabilities when you need them
■ Supports all test methods — DualGround, first
trip, timing & travel, DRM and vibration
■ DualGround allows for safer and faster testing
with both sides grounded
■ Local CABA software — the common platform
for all Megger breaker analyzers
■ Full graphical display for hook-up instructions
and data analysis
■ Built-in test plans for advanced and easy
testing
■ Designed and built for every test requirement

DESCRIPTION The adaptive, user-interactive software ensures repeatable

The TM1800TM is the optional tool for circuit breaker and reliable tests and supports the work flow with
maintenance, designed and built on more than 20 years’ advanced graphical help for every step including
experience and more than 4,000 breaker analyzers connections to breaker and analyzer. It automatically
worldwide. The modular design makes it possible to senses which modules that are installed and adopts the
configure the TM1800 to perform any measurement on user interface accordingly. This Select-Connect-Inspect
every type of circuit breaker. workflow assists users in easy steps, making testing easier
to learn and perform.
The robust design utilizes powerful technology that makes
circuit breaker testing accurate, powerful and still very The system also offers full connection capability to the
easy. New measurement modules allow for time savings local network and printers, etc.
as many parameters can be measured simultaneously,
Testing with DualGround
eliminating the need for lengthy setup each time.
DualGroundTM testing uses the new Dynamic Capacitive Electricity deregulation changes the business environment
Measurement (DCM) module, making the testing safe and for utilities, switchgear owners and service companies.
fast. The DualGround allows for testing while keeping the Deregulation has been shown to lead directly to increased
circuit breaker grounded on both sides throughout the emphasis on efficiency of operations, maintenance and
test, eliminating the need to lift ground connections during service levels. Globalization of business brings new
the timing of the breaker. challenges and new requirements for increased emphasis
on health, safety and environmental compliance.
Timing M/R module uses Active Interference Suppression Experience has also shown demands for shorter time
technology to obtain correct timing and accurate Pre- periods for testing, while the switchgear is less and less
Insertion Resistance (PIR) values in high voltage available to be taken out of service.
substations having coupled interference currents.
The safety aspect
The modular design allows the user to configure the
Network operators and service companies need to
TM1800 to perform the desired task. The instrument can
maintain and develop their industry safety record. Eminent
easily be configured for more advanced analysis tools such
international bodies including the IEEE® and IEC®, National
as DRM or vibration analysis when basic timing and travel
Safety agencies and Trade Unions increases the demands
information does not provide enough data for accurate
on safety. During deregulation, applicable safety
decisions to be made.
 Programma
TM1800 Circuit Breaker Analyzer System

regulations have been clarified and the application of Equipment and methods that
existing rules has tightened. Keeping a good safety record supports DualGroundTM testing are
is becoming a crucial asset in attracting investors and associated with the DualGround
customers. symbol. This symbol certifies the
use of groundbreaking technology
The capacitive coupling from live high-voltage conductors
and methods that enables a safe,
induces harmful/lethal currents in all parallel conductors in
fast and easy workflow with both
all substations. Grounding both sides of the test object
sides grounded throughout the test.
conducts the induced current to earth and provides a safe
area for the test personnel. See Figures 1 and 2.

Both sides grounded

The best way to provide safety in circuit breaker testing is
to keep both sides of the circuit breaker grounded
throughout the test. This makes the test faster, easier and
safer.
The DualGroundTM testing method is available for all tests
on all circuit breakers. Contact your Megger representative
to discuss how this method can help you make faster and
safer tests.

Figure 1. With only one side grounded the induced current can Figure 2. Testing is much safer using the DCM module and
reach values high enough to be harmful or lethal for humans. DualGround.

Test procedures – Comparison between 4 Perform testing

Conventional and DualGround Testing
5 Authorized person applies ground (left out when
1 Site preparation (isolate work area, apply safety testing with DualGround)
ground, issue permit to work)
6 Cancel sanction for test. Disconnect test equipment
2 Hook up test equipment. Issue sanction for test
7 Site closing (cancel permit to work, disconnect
3 Authorized person removes the ground (left out ground)
when testing with DualGround)

Two risky steps (3 & 5) in the workflow are left out and one
Dual Ground step is made safer. Result: safer, faster and easier testing.

Conventional Testing
 Programma
TM1800 Circuit Breaker Analyzer System

The following table indicates the Programma instruments Motion measurements

that the TM1800 works in conjunction with: A high-voltage breaker is designed to interrupt a specific
Contact resistance MJÖLNER or SDRM202 short-circuit current, and this requires operation at a given
speed in order to build up an adequate cooling stream of
Timing TM1800 with DCM air, oil, vacuum or gas (depending on the type of breaker).
Motion TM1800 This stream cools the electric arc sufficiently to interrupt
the current at the next zero-crossover. It is important to
Dynamic Resistance TM1800 with DRM1800 interrupt the current in such a way that the arc will not
Measurement (DRM) re-strike before the breaker contact has entered the
Vibration CABA Win Vibration damping zone.
Speed is calculated between two points on the motion
APPLICATIONS curve. The upper point is defined as a distance in length,
degrees or percentage of movement from a) the breaker’s
Timing measurements
closed position, or b) the contact-closure or contact-
Simultaneous measurements within a single phase are separation point. The time that elapses between these two
important in situations where a number of contacts are points ranges from 10 to 20 ms, which corresponds to 1-2
connected in series. Here, the breaker becomes a voltage zero-crossovers.
divider when it opens a circuit. If the time differences are
too great, the voltage can be too high across one contact. The distance throughout which the breaker’s electric arc
The tolerance for most types of breakers is less than 2 ms. must be extinguished is usually called the arcing zone.
From the motion curve, a velocity or acceleration curve
The time tolerance for simultaneous measurements can be calculated in order to reveal even marginal changes
between phases is greater for a 3-phase power that may have taken place in the breaker mechanism.
transmission system running at 60 Hz since there is always
2.77 ms between zero-crossovers. Still, the time tolerance Damping is an important parameter for the high energy
is usually specified as less than 2 ms, even for such operating mechanisms used to open and close a circuit
systems. It should also be noted that breakers that perform breaker. If the damping device does not function
synchronized breaking must meet more stringent satisfactorily, the powerful mechanical strains that develop
requirements in both of the previously stated situations. can shorten breaker service life and/or cause serious
damage. The damping of opening operations is usually
There are no generalized time limits for the time measured as a second speed, but it can also be based on
relationships between main and auxiliary contacts, but it is the time that elapses between two points just above the
still important to understand and check their operation. breaker’s open position. See Figure 3.
The purpose of an auxiliary contact is to close and open a
circuit. Such a circuit might enable a closing coil when a
breaker is about to perform a closing operation and then
open the circuit immediately after the operation starts,
thereby preventing coil burnout.
The "a" contact must close well in advance of the closing
of the main contact. The "b" contact must open when the
operating mechanism has released its stored energy in
order to close the breaker. The breaker manufacturer will
be able to provide detailed information about this cycle.

1 Trip coil energized 6 Change in coil inductance

2 Armature travel 7 Proportional to dc coil
3-4 Armature operates trip latch resistance

4-5 Armature completes its travel 8 Auxiliary contact opens

9 Current decay

Figure 4. Example of coil current on circuit breaker

Figure 3. Motion diagram and timing graphs for a close-open

operation
 Programma
TM1800 Circuit Breaker Analyzer System

Coil currents The main contact resistance is measured dynamically over

These can be measured on a routine basis to detect an open or close operation in DRM. With DRM
potential mechanical and/or electrical problems in measurement the arcing contact length can be reliably
actuating (trip & close) coils well in advance before estimated. The only real alternative in finding the length of
developing actual faults. The coil’s maximum current the arcing contact is dismantling the circuit breaker.
(if current is permitted to reach its highest value) is a A reliable DRM interpretation requires high DC test current
direct function of the coil’s resistance and actuating and a circuit breaker analyzer with good measurement
voltage. This test indicates whether or not a winding resolution. See Figure 5.
has been short-circuited. See Figure 4.
Testing with DualGroundTM is applicable.
When a voltage is being applied across a coil, the current
curve first shows a straight transition whose rate of rise Vibration analysis
depends on the coil’s electrical characteristic and the Vibration analysis is a non-invasive method using an
supply voltage (points 1-2). When the coil armature (which acceleration sensor without moving parts. The breaker can
actuates the latch on the operating mechanism’s energy stay in service during the test. A single Open-Close
package) starts to move, the electrical relationship changes operation is all that is required for the measurement. The
and the coil current drops (points 3-5). When the armature first operation is different compared to the second and
hits its mechanical end position, the coil current rises third because of corrosion and other metal to metal
proportionally to the coil voltage (points 5-8). The contact issues. Vibration is an excellent method to capture
auxiliary contact then opens the circuit and the coil the first operation after long periods of breaker non-
current drops to zero with a current decay caused by operation.
the inductance in the circuit (points 8-9).
The analysis compares the vibration time series with earlier
The peak value of the first, lower current peak is related taken reference. The vibration method detects faults that
to the fully saturated coil current (max current), and this can hardly be indicated with conventional methods. But if
relationship gives an indication of the spread to the lowest conventional data such as contact time, travel curve, coil
tripping voltage. If the coil was to reach its maximum current and voltage are available in addition to the
current before the armature and latch start to move, the vibration data even more precise condition assessment is
breaker would not be tripped. It is important to note that possible. The vibration data is stored together with
the relationship between the two current peaks varies, available conventional data.
particularly with temperature. This also applies to the
The Vibration method is published in CIGRÉ and IEEE®
lowest tripping voltage.
papers. Vibration can be performed under very safe
Dynamic Resistance Measurement (DRM) conditions for the test technician as both sides can be
A circuit breaker will have the arcing contact wear by grounded throughout the test. Also less climbing is
normal operation as well as when breaking short-circuit required since no access to the breaker contact system is
currents. If the arcing contact is too short or otherwise in needed, the acceleration sensor is easily mounted on the
poor condition, then the breaker soon becomes unreliable. breaker.
Main contact surfaces can be deteriorated by arcing Testing with DualGroundTM is applicable.
resulting in increased resistance, excessive heating and in
worst-case failure.

Figure 5. DRM is a reliable method to estimate the length/wear of the arcing contact.
The DRM1800 provides high current and the TM1800 gives an accurate measurement
with very good resolution. Besides, it is possible to use DualGround testing.
 Programma
TM1800 Circuit Breaker Analyzer System

Select – Connect – Inspect Select

Working with TM1800 means fast, safe and easy testing. Select the template
Testing is done with a three-step process. suitable for the test
and circuit breaker
1. Select a suitable template from the template library from the library.
depending on number of contacts per phase, motion or
not, resistor contacts and more.
2. Connect the test leads according to the graphical help
screen.
3. Turn the “Measure” knob. The measurement is
performed, analyzed and the results will be displayed on
the screen. Magnification and compare functions are
available.
For more advanced setup there is still the opportunity to Connect
control all the details in the measurement. The large Connect test leads
number of general purpose templates cover most circuit and cables
breakers found throughout the world. It is also possible to according to display.
select a custom template with special adaptions. The user Separate help screen
can edit templates with assistance from customer support. per cable.
This is a very powerful tool to customize TM1800 for fast,
safe and easy work according to the user’s needs in every
detail.
It is possible to print a test report, either from the TM1800
built in printer module or using CABA Win on a PC. Inspect
CABA Win allows the user to perform a more advanced Turn the knob and
analysis of the data. CABA Win is also the archive for the measurement is
common test data. displayed on the
screen ready for
inspection.

FEATURES AND BENEFITS

■ Circuit breaker analyzer test set TM1800 performs
■ CABA local circuit breaker analyzing software — pre-
timing, travel and motion tests, dynamic and static
defined and custom based circuit breaker templates,
resistance measurement and coil current measurements.
connection diagram through graphical help screen.
■ Light and portable TM1800 unit with user configurable ■ Active Interference Suppression technique used for
modules to suit different demands, testing and
correct timing and accurate PIR values in high voltage
applications.
substations having coupled interference currents.
■ Built in PC with keyboard and mouse, HDD module ■ Unique DMC measuring technology — Dynamic
with removable hard drive to store more than 1000 test
Capacitive Measurement for dual ground testing.
results.
■ Data back up and transfer through USB and Ethernet
■ Quick and easy testing — simply a turn of “Measure”
communication.
knob provides instant graphical results and
measurements. ■ Print a graphical and tabular test report through printer
module or CABA win software on a PC.
■ All testing done with same connections — save “out of
service” time of circuit breaker and less physical labor ■ CABA Win software — used for advanced data analysis,
for operator as no need of reconnecting the unit for reporting and data management.
different tests.
■ Multiple language support — English, French, German,
■ Dual ground testing — safest way of testing by Spanish, Swedish
grounding both sides of the circuit breakers.
 Programma
TM1800 Circuit Breaker Analyzer System

SPECIFICATIONS Some of the key features of configurable TM1800 unit are:

GENERAL ■ Eight user configurable slots for modules

Specifications are valid after 30 minutes warm up time. System ■ Temperature sensor connection
time base drift 0.001% per year. Specifications are subject to ■ Quick backup on USB device
change without notice.
■ Trigger inputs and outputs
Environment ■ Outputs for warning signal
Application field ■ Earth (Ground) connection
For use in high-voltage substations and industrial environments. ■ Communication interfaces (USB, Ethernet, etc)
Temperature
Operating: -10°C to +50°C (+14°F to +122°F) BASIC UNIT SPECIFICATIONS
Storage & transport: -55°C to +70°C (-67°F to +158°F) Power supply (nominal) 100-240 V AC, 50/60 Hz
Humidity: 5% – 95% RH, non-condensing Power consumption 250 VA (max)
Dimensions 515 x 173 x 452 mm
CE-marking (20.3” x 6.8” x 17.8”)
LVD Low Voltage Directive 73/3/EEC am. Weight 15.5 kg (34.2 lbs)
by 93/68/EEC
EMC EMC Directive 89/336/EEC am. by External Input
91/263/EEC, 92/31/EEC and 93/68/EEC Trig in
Time accuracy: ±0.1 ms
Voltage mode
Input range: 0 to 250 V AC/DC
MODULAR DESIGN OF THE TM1800 Threshold level: user configurable in software steps of 1 V
Contact mode
BASIC UNIT, Cat. No. CG-19090 Open circuit voltage: 35 V DC ±20%
The modularized design makes it very flexible to user Short circuit current: 10 to 40 mA
needs and enables reconfiguration for new demands and Threshold level: 1 - 2 kΩ
upgrade with new functionality. The user can configure External Output
TM1800 to a complete test set based upon user specific Trig out
need. The firmware, CABA Local, guides the user to Number of channels: 3 (Trig Out, DRM, Warning)
efficient circuit breaker testing. Pulse duration: 1-999 ms, user configurable in steps of 1 ms
Voltage mode
All inputs and outputs on the TM1800 and the modules Open circuit voltage: 12 V DC ±5%
are designed to withstand the harsh environment in high- Voltage at 0.5A: 9 V DC ±10%
voltage substations and industrial environments. Max short circuit current: 1.5 A
Contact mode
With built-in protection circuits and software-designed Max switching current: 0.5 A at 12 V and resistive load
protection the TM1800 has built-in suppression to protect Voltage at 0.5A: 9 V DC ±10%
against failures caused by over-voltages generated in the Max short circuit current: 1.5 A
substations and high-voltage environments. DRM (for DRM1800 only)
Warning
The HDD module is a part of the basic unit and contains Relay: for lamp or horn
the hard drive with all data and software setup. It can Pre-operation warning: 0 0 999 s, user configurable in
easily be removed and changed. steps of 1 s
Voltage mode
Output voltage: 12 V DC ±10%
Voltage at 0.5A: 9 V DC ±10%
Short circuit current: Fuse 1 A DC fasting acting type
(F1H250V)
Contact mode
Max switching current: 1 A at 12 V and resistive load
Communication Interface
USB Ver. 1.1
Ethernet 100 base-Tx Fast Ethernet
External screen SVGA, up to 800 x 600 at 24 bit color,
32 MB SDRAM
HMI, Human-Machine Interface
CABA Local Circuit breaker analyzing software
Languages English, French, German, Spanish, Swedish
Display Transreflecting to increase visibility in direct
sunlight
Diag. Size 21 cm (8”)
Keyboard Built-in
 Programma
TM1800 Circuit Breaker Analyzer System

CONTROL MODULE, Cat. No. CG-19030 TIMING M/R MODULE, Cat. No. CG-19080
The control module controls The timing M/R module uses one hook-up for testing all
the operation of the circuit the important timing parameters of a contact without the
breaker. Various circuit breaker need of reconnection or special set-ups.
operation sequences can be
One timing M/R module will
performed accurately and without
measure up to six contacts
any bounce.
including linear PIR contacts.
This module also measures
The timing M/R module is
important parameters during the
using patented Active
test. Coil current, control voltage,
Interference Suppression to
coil resistance for each phase on
obtain correct timing and
one phase operated circuit
accurate PIR values regardless
breaker is automatically measured
of interference in high voltage
without any additional test lead
substations.
connections. Auxiliary contact
timing is measured for single The module is equipped with
operation. three galvanically isolated XLR
female connectors with built-in
■ Three independent contact
voltage source.
functions per module
■ Six channels per module
■ Pre-programmed sequences
Close, Open, Close/Open, ■ Active Interference Suppression
Open/Close, Open/Close/Open
■ High resolution and up to
■ Timing of a and b auxiliary contacts for single operation 40 kHz sampling

CONTROL MODULE SPECIFICATIONS ■ Main and parallel resistor contact timing

General ■ Resistance value of parallel resistors
No. of channels 3
Time base Accuracy ±0.01% of reading ±1 sample interval TIMING M/R MODULE SPECIFICATIONS
Max sample rate 10 kHz General
Measurement time 19 s at 10 kHz sample rate, No. of channels 6 (2 voltage ranges per channel when
39 s at 5 kHz sample rate, used in voltage mode)
200 s at 10 kHz sample rate using data Time base inaccuracy ±0.01% of reading ±1 sample interval
compression Min resolution 0.05 ms
Weight 1.0 kg (2.2 lbs) Max sample rate 40 kHz
Non-bouncing switch Measurement time 16 s at 20 kHz sample rate,
Max current 60 A AC/DC, pulse < 100 ms 32 s at 10 kHz sample rate,
Fuse 15 A DC 200 s at 10 kHz sample rate using data
Duration User configurable in steps of 1 ms compression
Delay User configurable in steps of 1 ms Data compression is available at sample
rates up to 20 kHz
Current measurement Weight 0.8 kg (1.8 lbs)
Measurement range 0 to 60 A AC/DC
Resolution 16 bits (15 bits at data compression) Timing of main and resistive contacts
Accuracy ±2% of reading ±0.1% of range Open circuit voltage 6 V or 26 V ±10% (toggling at every
second sample at sample rates from 10
Voltage measurement kHz and upwards)
Measurement range 0 to 250 A AC/DC Short circuit current 9.7 mA or 42 mA ±10%
Resolution 20 mV (40 mV at data compression) Status threshold
Accuracy ±1% of reading ±0.1% of range Main: Closed < 10 Ω < open
Main and resistor: main <10 Ω <PIR < 10 kΩ < Open
PIR resistance measurement
Supported PIR types Linear PIR
Measurement range 10 Ω to 10 kΩ
Accuracy ±10% of reading ±0.1% of range
 Programma
TM1800 Circuit Breaker Analyzer System

DCM MODULE, Cat. No. CG-19190 Transducer

The DCM module enables DualGround testing. This Resistance 500 Ω - 10 kΩ at 10 V output
increases safety and also makes testing easier. This module Weight 0.8 kg (1.8 lbs)
uses a patented measuring technology called Dynamic Output
Capacitive Measurement. Voltage output 10 V dc ±5%, 24 V DC ±5%
Max output current 20 to 30 mA
Each pair of a Timing M/R and
DCM module provides up to six Current measurement
channels. Each channel requires Measurement range 0 to 20 mA DC
a special DCM cable with Resolution 16 bits (15 bits at data compression)
Accuracy ±1% of reading ±0.1% of range
integrated electronics.
Voltage measurement
The TM1800 system can be
Input voltage range 0 to 250 V AC/DC
equipped with multiple DCM Measurement range ±10 V dc, 0 to 250 V AC/DC
and Timing M/R module pairs Resolution 16 bits (15 bits at data compression)
that enable timing measurement Accuracy
on up to 18 contacts. 250 V range: ±1% of reading ±0.1% of range
10 V range: ±0.1% of reading ±0.1% of range
■ Six channels per module
■ Timing test using DualGround
■ Safe, fast and easy testing

DCM MODULE SPECIFICATIONS

General DIGITAL MODULE, Cat. No. CG-19040
No. of channels 6 With digital/incremental
Weight 625 g (1.4 lbs) transducers motion and other
Output measurement becomes even
Voltage 0 to 5 V rms ac more accurate, faster and easier.
Current 0 to 20 mA rms ac The digital module enables use
of incremental rotary or linear
transducers for measurements
like motion, velocity and
ANALOG MODULE, Cat. No. CG-19000 damping characteristics of
The analog module measures circuit breakers.
any analog entity from a
transducer mounted on a circuit ■ Six channels per module
breaker. It enables ■ Incremental transducers
measurements of motion, speed, with RS422
current, voltage, pressure,
vibration etc. Motion ■ Up to ±32000 pulses resolution
measurements are taken with ■ Up to 20 kHz sampling
standard linear or rotary
transducers, shunts and 4-20 mA DIGITAL MODULE
transducers. High level user SPECIFICATIONS
interface makes measurement General
faster and easier. No. of channels 6
Supported types Incremental transducers, RS422
Universal transducers and Time base accuracy ±0.01% of reading ±1 sample interval
specialized transducers with Max sample rate 20 kHz
conversion tables are available Measurement time 16 s at 20 kHz sample rate,
for numerous circuit breakers. 32 s at 10 kHz sample rate,
200 s at 10 kHz sample rate using data
■ Three channels per module compression
Weight 0.7 kg (1.5 lbs)
■ Supports industrial analog transducers
Output
ANALOG MODULE SPECIFICATIONS Voltage 5 V DC ±5% or 12 V DC ±5%
Max output current 200 mA
General
No. of channels 3 Digital output
Time base accuracy ±0.01% of reading ±1 sample interval Range ±32,000 pulses
Max sample rate 40 kHz Resolution 1 pulse
Measurement time 10 s at 40 kHz sample rate, Accuracy ±1 pulse
20 s at 20 kHz sample rate,
200 s at 10 kHz sample rate using data
compression
 Programma
TM1800 Circuit Breaker Analyzer System

TIMING AUX MODULE, Cat. No. CG-19060 PRINTER MODULE, Cat. No. CG-19050
The timing aux module expands The Printer module offers a
the TM1800 system with timing convenient and practical way of
inputs for measuring any auxiliary making printouts of test results in
contact on the circuit breaker. the field.
It measures timing of both dry The printouts contain both
and wet contacts for example numerical and graphical results.
timing of spring charging motor, Pre-installed printer templates in
anti-pump relay etc. the TM1800 are easy to adapt
■ Six channels per module and provide different printout
formats to suit specific needs for
■ Polarity insensitive a comprehensive test report.
■ Dry and wet auxiliary contacts ■ Thermal printer sensitive line
dot method
TIMING AUX MODULE
SPECIFICATIONS ■ Paper width 114 mm (4")
General
No. of channels 6
■ Printing speed 50 mm/s
Time base accuracy ±0.01% of (400 dot lines/s)
reading ±1 sample interval
Max sample rate 20 kHz PRINTER MODULE SPECIFICATIONS
Measurement time 15 s at 20 kHz sample rate, General
30 s at 10 kHz sample rate, Printer type Thermal printer
200 s at 10 kHz sample rate using data Paper type Thermal 114 mm
compression Max sample rate 20 kHz
Weight 0.8 kg (1.8 lbs) Storage & transport
temperature -20°C to +60°C (-4°F to +140°F)
Voltage mode Weight 0.8 kg (1.8 lbs)
Input voltage range 0 - 250 V AC/DC
Status threshold ±10 V
Accuracy ±0.5 V
Contact mode
Open circuit voltage 25 to 35 V
Short circuit current 10 to 30 mA
Status threshold Closed < 100 Ω, Open > 2 kΩ

HDD MODULE
The HDD module is a special
module which is a part of the
basic unit. It is a data storage
module.
Storage of all set up, user
customization and measurement
data is done in the HDD
module. The module is easily
replaced e.g. when different
users are sharing one TM1800
and want individual setups, data
and configurations.
■ Change set-up, user
customization, measurement
data by changing HDD
module
 Programma
TM1800 Circuit Breaker Analyzer System

ORDERING INFORMATION

Item Cat. No.

TM1800 Basic Unit
Complete with: HDD module, CABA local,
transport case, USB memory CG-19090
Control Module (3 independent contacts)
Including: 3 cable sets, 5 m (16 ft), GA-00877 CG-19030
Timing M/R Module (6 channels + 6 PIR)
TM1800 Basic Unit
Including: 3 cable sets, 5 m (16 ft) total length,
1.5 m (4.9 ft) spread, GA-00850 CG-19080
DCM Module (3 channels)
Including: 3 DCM-cables, 12 m (39 ft) CG-19190
Analog Module (3 channels)
Including: 3 cable sets, 10 m (33 ft), GA-01005 CG-19000
Digital Module (6 channels) CG-19040
Timing Aux Module (6 channels)
Including: 3 cable sets, 5 m (16 ft), GA-00870 CG-19060
Printer Module
Including: paper spool, GC-00040 CG-19050
TM1800 Standard
TM1800 – Configurations
TM1800 Standard, complete with:
TM1800 Basic unit, +1 Control Module,
1 Timing M/R module, 1 Analog module CG-19290
TM1800 Standard – for DualGround testing
Complete with: TM1800 Standard
+1 DCM module incl. 6 DCM-cables CG-19292
TM1800 Expert, complete with:
TM1800 Standard +1 Control modules,
DCM-cables
1 Timing M/R module, 1 Timing AUX module, x6
CABA Win CG-19294 TM1800 Standard for Dual Ground Testing
TM1800 Expert – for DualGround testing,
complete with: TM1800 Expert +1 DCM module
incl. 6 DCM-cables CG-19296
Optional accessories
CABA Win

TM1800 Expert

DCM-cables
x6
TM1800 Expert for DualGround Testing

UK UNITED STATES OTHER TECHNICAL SALES OFFICES Registered to ISO 9001:2000 and
Archcliffe Road, Dover 4271 Bronze Way Täby SWEDEN, Norristown USA, ISO 14001:2004
CT17 9EN England Dallas, TX 75237-1019 USA Sydney AUSTRALIA, Toronto CANADA,
Cert. no. GBG0005937
T +44 (0) 1 304 502101 T 1 800 723 2861 (USA only) Trappes FRANCE, Kingdom of BAHRAIN,
F +44 (0) 1 304 207342 T +1 214 333 3201 Mumbai INDIA, Johannesburg SOUTH TM1800_DS_EN_V02
UKsales@megger.com F +1 214 331 7399 AFRICA, and Chonburi THAILAND www.megger.com
USsales@megger.com Megger is a registered trademark