DWG Number 109T0801 Rev - Released 7/16/2013 Page 1 of 3
SIZE DWG NO SH REV
A 109T0801 1 -
DATE
REV ZONE DESCRIPTION APPROVED
(YYYY-MM-DD)
ECO0111240
THIS DOCUMENT SHALL BE REVISED THIS DRAWING TO BE REVISED IN MICROSOFT
IN ITS ENTIRETY. ALL SHEETS OF WORD ONLY. THE SOURCE FILE IS STORED IN A
THIS DOCUMENT ARE THE SAME SECURE DATABASE.
REVISION LEVEL AS INDICATED.
REVISION DESCRIPTION IS FULLY
STATED ON THE FIRST SHEET OF
THIS DOCUMENT.
ITEM DESCRIPTION DWG. NO.
LIST OF COMPLEMENTARY DOCUMENTS
©COPYRIGHT 2013 GE POWER & WATER (USA), LLC AND/OR ITS AFFILIATES. All rights reserved. The information contained herein isGE Power & Water Steam Turbine Proprietary Technical Information that
belongs to the General Electric Company, GE Power & Water (USA), LLC and/or their affiliates, which has been provided solely for the express reason of restricted private use. All persons, firms,or corporations
who receive such information shall be deemed by the act of their receiving the same to have agreed to make no duplication, or other disclosure, or use whatsoever for any, or all such information except as
expressly authorized in writing by the General Electric Company, GE Power & Water (USA), LLC and/or its affiliates.
GE CLASS II (INTERNAL NON-CRITICAL)
SIGNATURES & DATES
GE POWER & WATER
DRAWN P, SENTHILKUMARAN STEAM TURBINE
DRAWN DATE (YYYY-MM-DD) 2013-07-15
CHECK CASHMAN, MARK W
CHECK DATE (YYYY-MM-DD) 2013-07-15 THERMOMETER
ENGRG COFFEY, DANIEL
ENGRG DATE (YYYY-MM-DD) 2013-07-12
FIRST MADE FOR: STEAM TURBINE MLI/COST CODE: VS41/PS41
ADDITIONAL APPROVALS
SIZE CAGE CODE DWG NO
APPLIED PRACTICES SEE PLM FOR APPROVAL INFORMATION
A 109T0801
SIM TO: NONE DOL CODE: US-NY, SCHENECTADY SHEET 1 of 3
GE Proprietary Information - Class II (Internal) US EAR - NLR
DWG Number 109T0801 Rev - Released 7/16/2013 Page 2 of 3
SIZE DWG NO SH REV
A 109T0801 2 -
NOTES:
1. THERMOMETER TO BE INDIVIDUALLY PACKAGED & LABELED WITH G.E. DRAWING NUMBER.
2. THERMOWELLS ARE PROVIDED BY OTHERS, THERMOWELL DESIGN SHALL BE IN ACCORDANCE WITH ASME PTC 19.3.
PART 1 CASE: ASHCROFT DURATEMP
BACK CONNECTION
4.5” DIAL
CONNECTION: 0.50” NPT
STEM LENGTH: 9.00”
STEM DIAMETER: 3/8”
RANGE: 400˚F - 1200˚F
DUAL SCALE: ˚F PRIMARY / ˚C SECONDARY
DIAL: BLACK MARKINGS ON CONTRASTING DIAL FACE
ASHCROFT PART NO: 9-07021922P001
©COPYRIGHT 2013 GE POWER & WATER (USA), LLC AND/OR ITS AFFILIATES. All rights reserved. The information contained herein isGE Power & Water Steam Turbine Proprietary Technical Information that
belongs to the General Electric Company, GE Power & Water (USA), LLC and/or their affiliates, which has been provided solely for the express reason of restricted private use. All persons, firms, or corporations
who receive such information shall be deemed by the act of their receiving the same to have agreed to make no duplication, orother disclosure, or use whatsoever for any, or all such information except as
expressly authorized in writing by the General Electric Company, GE Power & Water (USA), LLC and/or its affiliates.
GE CLASS II (INTERNAL NON-CRITICAL)
SIZE CAGE CODE DWG NO
GE POWER & WATER
STEAM TURBINE
A 109T0801
DRAWN P, SENTHILKUMARAN
DRAWN DATE (YYYY-MM-DD) 2013-07-15 DOL CODE: US-NY, SCHENECTADY SHEET 2 of 3
GE Proprietary Information - Class II (Internal) US EAR - NLR
DWG Number 109T0801 Rev - Released 7/16/2013 Page 3 of 3
SIZE DWG NO SH REV
A 109T0801 3 -
FIGURE 1
©COPYRIGHT 2013 GE POWER & WATER (USA), LLC AND/OR ITS AFFILIATES. All rights reserved. The information contained herein isGE Power & Water Steam Turbine Proprietary Technical Information that
belongs to the General Electric Company, GE Power & Water (USA), LLC and/or their affiliates, which has been provided solely for the express reason of restricted private use. All persons, firms, or corporations
who receive such information shall be deemed by the act of their receiving the same to have agreed to make no duplication, orother disclosure, or use whatsoever for any, or all such information except as
expressly authorized in writing by the General Electric Company, GE Power & Water (USA), LLC and/or its affiliates.
GE CLASS II (INTERNAL NON-CRITICAL)
SIZE CAGE CODE DWG NO
GE POWER & WATER
STEAM TURBINE
A 109T0801
DRAWN P, SENTHILKUMARAN
DRAWN DATE (YYYY-MM-DD) 2013-07-15 DOL CODE: US-NY, SCHENECTADY SHEET 3 of 3
GE Proprietary Information - Class II (Internal) US EAR - NLR
