User Manual
Rev. 1.20
Introduction
MiraScreen 5G is a Wi-Fi display receiver, which
supports a reliable WiFi 802.11ac 5GHz + 2.4GHz
dual band connection. It supports the Miracast
standard for Android & Microsoft Windows, and
DLNA for home multimedia application.
Furthermore, it also complies with Apple AirPlay
Mirroring for iOS and Mac OS x. Enjoy screen
mirroring with MiraScreen!
Support@MiraScreen.com
Hardware Installation
Please follow below steps to setup MiraScreen:
Step 1: Connect WiFi cable (micro USB head) to
MiraScreen dongle main body.
Step 2: Plug the MiraScreen into the HDMI port of
your TV and switch to the right input source.
Step 3: Plug USB cable into an external USB power
adapter.
Note: 1 Amp current supply is highly recommended
for reliable Wi-Fi connection.
Step 4: You should see the main MiraScreen page
after power on
Hardware Button
1) Mode Switching: Switch between AirPlay and
Miracast Mode
2) 2.4GHz/5GHz WiFi Switching: Press 5 seconds
for changing the WiFi frequency band.
For iOS(iPhone/iPad) AirPlay Mirroring
Step 1: Switch to Airplay mode by pressing button
Step 2: Get SSID and password on screen
Step 3: Establish WiFi connection between iOS
device and MiraScreen.
Step 4: Turn on Airplay and select MiraScreen’s
SSID.
MiraCast for Android
Step 1: Switch to Miracast mode by pressing button
Step 2: Miracast mode ready
Step 3: Find the Miracast function on your Android
device (such as screen mirroring/miracast/smart
view).
Step 4: Establish Miracast connection between
Android device and MiraScreen.
AirPlay Mirroring for Mac OS X
Step 1: Switch MiraScreen Dongle to the
Airplay/DLNA mode, then connect your Mac to
MiraScreen Dongle via WiFi (SSID should be
MiraScreen ###, and read the 8-digit
password/PSK on screen).
Step 2: Switch on AirPlay of your Mac
MiraCast for Windows
Step 1: Switch to Miracast mode by pressing button
Step 2: for Window 10, launch the “Windows Start
Menu > Settings > Connected devices > Add a
printer or scanner”, and then search for MiraScreen
Dongle. After that you may start to mirror.
For Windows 8.1, launch the “Windows Start
Menu > Settings > PC and devices > Devices >
Add a device”, and then search for MiraScreen
Dongle. After that you may start to mirror.
Switch MiraScreen 2.4G/5G band
Step 1: Default 2.4GHz band
Step 2: Press the button for about 5s to switch to
5GHz band.
Step 3: Switch to 5GHz band successfully
Step 4: Establish 802.11ac 5GHz WiFi connection
between device and MiraScreen (Note: please
make sure your phone supports 8011.ac 5G
standard)
Connect to WiFi Router
Step 1: Switch to Airplay mode by pressing button,
and then get the IP address of your MiraScreen on
screen.
Step 2: Use browser on your device to access the
IP address of MiraScreen, and select your WiFi
router.
Step 3: Enter password.
Step 4: Connect to your WiFi router.
Setting and Firmware Upgrade
After connected with MiraScreen, an IP address will
be shown on setup screen. Please launch browser
on your devices (iOS/Androd/Mac/Windows etc.)
and then enter the IP address accordingly (ex:
192.168.203.1)
• Internet: Setup the router connection for your
MiraScreen. (Note: The connection between
MiraScreen and your device may be
disconnected when you switch to router
connection)
• Language: Change the language of MiraScreen
• Password: Change the password of MiraScreen
• Default Mode: Select AirPlay or Miracast as boot
up default mode
• Resolution: Change output resolution of
MiraScreen
• Upgrade: upgrade the firmware of MiraScreen.
Note: Required Internet connection on your
MiraScreen Dongle. IMPORTANT! Please
upgrade to the latest version in order to
compatible with up-to-date devices.
